دليل تعليمات طقم شريط إضاءة LED من BTF-LIGHTING FCOB CCT 24V

1. المقدمة

1.1 مرحباً بكم

This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING FCOB CCT 24V LED Strip Kit. Please read this manual thoroughly before use to ensure proper function and safety.

1.2 محتويات العبوة

تأكد من تضمين جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:

• 1x 16.4FT FCOB CCT LED Strip
• 1x RF Controller
• 1x DC24V Power Supply

Image 1.1: Included components of the BTF-LIGHTING FCOB CCT 24V LED Strip Kit, featuring the LED strip, RF controller, and DC24V power supply.

2. معلومات السلامة

Please observe the following safety precautions to prevent damage to the product or personal injury:

• تم تصميم هذا المنتج لـ للاستخدام الداخلي فقط (IP30 rating). Do not expose to water or high humidity.
• تأكد من حجم امدادات الطاقةtage matches the product requirements (DC24V).
• لا تقم بتوصيل شريط LED مباشرة بمصدر الطاقة الكهربائية.
• Avoid bending the LED strip sharply or applying excessive force, which may damage the circuit.
• Disconnect power before any installation, maintenance, or troubleshooting.
• يحفظ بعيدًا عن متناول الأطفال.
• Do not cover the LED strip with flammable materials.

3. المواصفات الفنية

4. الإعداد والتثبيت

4.1 التحضير

• Unroll the LED strip and inspect it for any damage.
• تأكد من أن سطح التركيب نظيف وجاف وأملس للحصول على أفضل أداء للالتصاق.
• Plan the layout of your LED strip before peeling off the adhesive backing.
• If cutting is required, cut only along the designated cut marks (usually indicated by copper pads) on the LED strip.

Image 4.1: The flexible LED strip being installed using mounting clips, demonstrating its adaptability to various surfaces.

4.2 تركيب شريط LED

1. Carefully peel off the blue protective film from the adhesive backing on the LED strip.
2. Press the LED strip firmly onto the desired clean surface, ensuring good contact along its entire length.
3. For additional security, especially on textured surfaces or corners, use the provided mounting clips (if included).

4.3 توصيل المكونات

1. Connect the 4-pin connector of the LED strip to the output of the RF controller. Ensure the arrows on the connectors align.
2. Connect the DC24V power supply to the input of the RF controller.
3. Plug the DC24V power supply into a standard electrical outlet.

Image 4.2: A clear wiring diagram illustrating how to connect the FCOB CCT LED strip, RF controller, and DC24V power supply.

Image 4.3: The RF controller connected to the LED strip, ready for operation in a kitchen setting.

4.4 التشغيل

Once all connections are secure, plug in the power supply. The LED strip should illuminate. If not, refer to the Troubleshooting section.

5. تعليمات التشغيل

5.1 Using the RF Remote Control

The kit includes a 17-key RF remote control for convenient operation. Ensure the plastic tab is removed from the remote's battery compartment before first use.

الصورة 5.1: تفصيلية view of the 17-key RF wireless remote control, highlighting its various buttons for light adjustment.

5.2 الوظائف الأساسية

• تشغيل/إيقاف: اضغط على أحمر زر لتشغيل الأضواء، و أسود زر لإيقاف تشغيلها.
• 60s Delay Off: Press the "60S DELAY OFF" button to set a 60-second timer before the lights turn off.

5.3 تعديل درجة حرارة اللون

The FCOB CCT LED strip allows for tunable white light from 2700K (Warm White) to 6500K (Cool White).

• CCT +/-: استخدم السهم الأيسر to decrease color temperature (warmer) and the السهم الأيمن to increase color temperature (cooler).
• Preset CCT: Directly select desired color temperatures using the dedicated buttons: 2700K, 3200K, 4000K, 5000K, 5500K, 6500K.

Image 5.2: Visual representation of color temperature adjustment, ranging from warm 2700K to cool 6500K, suitable for various environments.

5.4 Brightness Control

• Bright/Speed+: زيادة السطوع.
• Bright/Speed-: تقليل السطوع.

Image 5.3: Illustration of multiple brightness levels, from 0% to 100%, demonstrating the dimming capability of the LED strip.

5.5 Dynamic Modes and Scenes

The remote offers various dynamic modes and preset scenes:

• وضع: Cycle through different dynamic lighting effects.
• شروق الشمس غروب الشمس: Activate preset lighting scenes simulating sunrise or sunset.
• ضوء الليل: Activate a low-brightness night light mode.

Image 5.4: The RF wireless remote control offers memory function, 3 scenes, and 6 dynamic modes for versatile lighting options.

5.6 وظيفة الذاكرة

The controller features a memory function. After the controller is powered off and then restarted, the last used lighting effect (color temperature and brightness) will be maintained, eliminating the need to reset it.

Image 5.5: The memory function ensures that the LED strip retains its last lighting settings after being powered off and on.

6. الصيانة

6.1 العناية والتنظيف

• To clean the LED strip, gently wipe it with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the strip.
• تأكد من فصل الطاقة قبل التنظيف.

6.2 التخزين

• If storing the LED strip for an extended period, ensure it is clean and dry.
• يُخزن في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your LED strip, refer to the table below for common problems and solutions.

8. الضمان ودعم العملاء

8.1 معلومات الضمان

توفر شركة BTF-LIGHTING ضمان لمدة 12 شهرًا بدون قلق for this product. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, improper installation, or unauthorized modifications.

8.2 دعم العملاء

For technical assistance, warranty claims, or any questions regarding your BTF-LIGHTING product, please contact our customer service team. We offer خدمة العملاء على مدار الساعة طوال أيام الأسبوع.

Visit the official BTF-LIGHTING store for more information: BTF-LIGHTING Store

9. مقاطع فيديو المنتج

10. الميزات الرئيسية

10.1 Ultra Bright and Uniform Illumination

The FCOB (Flip Chip On Board) technology provides a dense light-emitting surface, resulting in a brighter, softer, and more uniform light output without visible light spots, unlike traditional SMD LED strips.

Image 10.1: Comparison of beam angles, showing the FCOB LED strip's 180-degree illumination versus traditional SMD strips' 120-degree, highlighting uniform light distribution.

10.2 High Color Rendering Index (CRI 90+)

With a CRI of over 90, the LED strip accurately renders colors, making objects appear more vibrant and true to their original hues.

Image 10.2: A visual comparison demonstrating the superior color rendering of CRI 90+ lighting compared to CRI 80+, showing more natural and vibrant colors.

10.3 Durable and Energy Efficient Design

Constructed with a double-layer PCB board and high-quality materials, this LED strip is designed for durability and a long lifespan of over 50,000 hours. The FCOB technology also contributes to higher energy efficiency.

Image 10.3: Infographic highlighting key features such as better conductivity, ultra-bright efficiency, seamless glow, tunable color temperature, and a long lifespan of 65,000+ hours.

11. التطبيقات

The BTF-LIGHTING FCOB CCT LED Strip Kit is suitable for a wide range of indoor lighting applications, including:

• Kitchen under-cabinet lighting
• Bedroom accent lighting
• Stairway illumination
• Mirror backlighting
• Corridor lighting
• DIY lighting projects
• Shelf and display lighting

Image 11.1: Collage showcasing diverse indoor applications, such as kitchen, office, and living room lighting, demonstrating the strip's versatility.