PetJoy Automatic Shock Collar User Manual

1. المقدمة

This user manual provides comprehensive instructions for the safe and effective operation of your PetJoy Automatic Shock Collar. This device is designed to assist in dog training through various modes including beep, vibration, and static stimulation, and features an automatic bark detection mode. Please read this manual thoroughly before use to ensure proper handling and to maximize the training benefits for your dog.

2. معلومات السلامة

Your dog's safety and comfort are paramount. Always prioritize humane training practices. Improper use of this device can cause physical or psychological harm to your dog. Observe your dog's reactions closely and discontinue use if signs of stress or discomfort are observed.

• غير مخصص للكلاب العدوانية: Do not use this product on aggressive dogs.
• Age and Health: This collar is intended for healthy dogs over 6 months old. Consult a veterinarian if your dog has any health concerns.
• مقاس الياقة: Ensure the collar fits snugly but not too tightly. It should allow two fingers to fit comfortably between the strap and your dog's neck.
• مدة الارتداء: Do not leave the collar on your dog for more than 12 hours per day. Prolonged wear can lead to skin irritation.
• فحص الجلد: Regularly inspect your dog's neck for signs of irritation, redness, or sores. If irritation occurs, discontinue use and consult a veterinarian.
• نقاط الاتصال: The contact points must have direct contact with your dog's skin. Long fur may require trimming to ensure proper contact.
• الإشراف: راقب كلبك دائمًا عند استخدام الطوق.
• سلامة المياه: While the receiver is IP67 waterproof, ensure the charging port is properly sealed before exposure to water.

3. محتويات العبوة

عند فتح العبوة، تأكد من وجود جميع المكونات:

• جهاز إرسال عن بعد
• طوق المتلقي
• حزام نايلون قابل للتعديل
• كابل شحن USB
• اختبار أداة الضوء
• Contact Points (Short and Long)
• دليل المستخدم

Image: Contents of the PetJoy Automatic Shock Collar package, showing the remote, receiver, charging cable, and various accessories.

4. الإعداد

4.1 شحن الجهاز

Before initial use, fully charge both the remote transmitter and the receiver collar. The charging process typically takes 2-3 hours.

• Connect the USB charging cable to the charging ports on both the remote and the receiver.
• Plug the USB cable into a compatible USB power source (e.g., USB power adapter, computer USB port, power bank).
• The indicator lights will show charging status (refer to specific light indicators in the quick start guide).

Image: Illustration demonstrating simultaneous charging of the remote control and receiver collar using the provided USB cable.

Image: Different power sources compatible with the USB charging cable for the PetJoy collar, including USB power strips, computers, power banks, and power adapters.

4.2 Attaching the Collar and Fitting

Proper fit is essential for both effectiveness and your dog's comfort.

• Select the appropriate length of contact points (short for short-haired dogs, long for long-haired dogs) and screw them into the receiver.
• Thread the adjustable nylon strap through the receiver.
• Place the collar on your dog's neck so that the contact points are underneath, touching the skin.
• Adjust the strap to be snug, allowing only two fingers to fit between the strap and your dog's neck. The receiver should not move freely on the neck.

Image: Visual guide to the dimensions of the PetJoy receiver and collar, along with an indication of suitable dog sizes (3.3-132 lbs).

4.3 Pairing the Remote with the Receiver

The remote and receiver must be paired for remote control functionality.

1. Ensure both the remote and receiver are sufficiently charged.
2. Turn on the receiver by pressing the power button once.
3. Press and hold the power button on the receiver until the indicator light flashes rapidly.
4. Within 10 seconds, press any function button on the remote control (e.g., Beep, Vibration, or Shock button).
5. The receiver's indicator light will stop flashing and remain solid, indicating successful pairing.

Image: Visual instructions for pairing the PetJoy receiver and remote, highlighting the power button on the receiver and any function key on the remote.

5. تشغيل الجهاز

5.1 طرق التدريب

The PetJoy collar offers three distinct training modes:

• وضع الصفير: Delivers an audible tone. This is often used as an initial warning or for positive reinforcement.
• وضع الاهتزاز: Provides a non-harmful vibration. Intensity levels can typically be adjusted from 1 to 100.
• وضع الصدمة: Delivers a static stimulation. Intensity levels can typically be adjusted from 1 to 100. Use this mode with caution and at the lowest effective level.

Image: Depiction of the three training modes (Beep, Vibration, Shock) available on the PetJoy collar, with adjustable levels for vibration and shock.

5.2 وظائف التحكم عن بعد

The remote control allows you to manually apply corrections and switch between modes.

• زر الطاقة: Turns the remote on/off.
• أزرار الوضع: Dedicated buttons for Beep, Vibration, and Shock modes.
• +/- الأزرار: Adjust the intensity level for Vibration and Shock modes.
• زر CH: Switches between different collar channels if you are training multiple dogs.
• زر الضوء: Activates the flashlight on the remote.

Image: The PetJoy remote control and receiver collar, illustrating the design and relative sizes of the components.

5.3 Automatic Bark Mode

The receiver collar features an automatic bark detection mode that can operate independently of the remote.

• To activate/deactivate the auto mode, locate the sensor hole on the receiver and follow the instructions in the quick start guide or product details.
• In auto mode, the collar will automatically deliver corrections (typically beep, then vibration, then static) when it detects barking.

Image: Close-up of the PetJoy receiver collar highlighting the "Auto Mode Sensor Hole" and indicating the ability to toggle auto mode on or off.

5.4 Control Range

The remote control offers a significant operating range, allowing for training in various environments.

• The effective control range is up to 2800 feet (approximately 850 meters) in open areas with no obstructions.
• Environmental factors, such as terrain, weather, and electromagnetic interference, can affect the actual range.

Image: A visual representation of the PetJoy collar's long control range, showing a dog and handler in an open field with a stated range of up to 2800 feet.

6. الصيانة

Proper maintenance ensures the longevity and optimal performance of your PetJoy collar.

• تنظيف: امسح جهاز الاستقبال وجهاز التحكم عن بعد بالإعلانamp قماش. لا تستخدم مواد كيميائية قاسية أو منظفات كاشطة.
• العناية بالبطارية:
  • Charge the devices fully before long periods of inactivity.
  • Recharge every 3-4 months if not in use to maintain battery health.
  • The remote has a standby time of up to 90 days, and the receiver has a working time of up to 30 days on a full charge.
• العزل المائي: The receiver is IP67 waterproof, meaning it can withstand immersion in up to 1 meter of water for 30 minutes. Ensure the charging port cover is securely closed before exposing the receiver to water.

Image: A border collie splashing in water, illustrating the IPX7 waterproof protection feature of the PetJoy receiver collar.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

• رقم الموديل: PJ-PD525
• ماركة: بيت جوي
• وزن السلعة: 1.23 أونصة (35 جرامًا)
• مادة: أكريلونيتريل بوتادين ستايرين
• لون: أسود
• نوع البطارية: بوليمر الليثيوم (متضمن)
• Remote Standby Time: حتى 90 يوما
• Receiver Working Time: حتى 30 يوما
• تصنيف مقاومة الماء: IP67 (Receiver)
• نطاق التحكم: حتى 2800 قدم (منطقة مفتوحة)
• Suitable for Dogs: 3.3 - 132 رطلاً

9. الضمان والدعم

PetJoy stands behind the quality of its products. For warranty information, product support, or any inquiries, please refer to the contact details provided on the product packaging or visit the official PetJoy webيرجى الاحتفاظ بإثبات الشراء الخاص بك للمطالبة بالضمان.

PetJoy Store: Visit the PetJoy Store on Amazon