1. المقدمة
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Onforu 100W 14000lm LED Shop Lights. Please read this manual thoroughly before use and retain it for future reference.
2. معلومات السلامة
اتبع دائمًا احتياطات السلامة الأساسية لتقليل مخاطر الحريق والصدمات الكهربائية والإصابة الشخصية.
- تأكد من فصل التيار الكهربائي قبل التركيب أو الصيانة.
- Do not look directly into the LED light when it is on, as it may cause eye damage.
- احتفظ بالمنتج بعيدًا عن المواد القابلة للاشتعال.
- This product is IP66 waterproof, suitable for outdoor use, but avoid submerging it in water.
- يجب أن يتم التثبيت بواسطة كهربائي مؤهل إذا لم تكن متأكدًا.
- تأكد من أن سطح التثبيت قادر على تحمل وزن التركيبات.
3. محتويات العبوة
تأكد من أن جميع المكونات موجودة وغير تالفة عند فتح العبوة:
- LED Shop Light (2 units)
- Lamp Brackets (2 pairs)
- M6 Hex Screw Key (1 unit)
- M6 Screws (2 units)
- Plastic Expansion Nails (2 units)
- Screws for Mounting (2 units)
- Additional connectors for linking (as shown in assembly video)

4. الإعداد والتثبيت
The Onforu LED Shop Lights are designed for easy installation and can be mounted in various configurations (wall, ground, or ceiling) and can also be linked horizontally or vertically.
4.1 Single Unit Installation
- ربط الأقواس: تأمين لamp brackets to the sides of the LED light fixture using the provided M6 screws and hex key. Do not overtighten initially to allow for angle adjustment.
- تركيب التركيبات: Choose your desired mounting location (wall, ground, or ceiling). Use the plastic expansion nails and mounting screws to firmly attach the brackets to the surface.
- ضبط الزاوية: Once mounted, adjust the angle of the light fixture to direct illumination as needed. The fixture allows for 180° adjustment. Tighten the M6 screws on the brackets to secure the angle.
- توصيل الطاقة: Plug the power cord into a standard 120V AC outlet. The light features an in-line switch for convenient power control.


الفيديو 1: مقدمة قصيرةview demonstrating the installation process and adjustable features of the Onforu LED Flood Light.
4.2 Linking Multiple Units
The lights can be connected horizontally or vertically to create a longer or wider lighting solution. Use the provided connectors and hex key to secure the units together.
- Horizontal Connection: Align two light units side-by-side. Use the small connecting brackets and screws to join them securely. Ensure the power cables are routed appropriately.
- Vertical Connection: Align two light units one above the other. Use the small connecting brackets and screws to join them securely.
Video 2: An official product video from Onforu demonstrating the various installation methods, including linking multiple units horizontally and vertically, and showcasing the included hardware.
5. تعليمات التشغيل
Operating your Onforu LED Shop Light is straightforward:
- Once installed and plugged into a power outlet, locate the in-line switch on the power cord.
- Press the switch to turn the light ON.
- Press the switch again to turn the light OFF.

6. الصيانة
To ensure optimal performance and longevity of your LED Shop Lights:
- تنظيف: Periodically clean the glass cover with a soft, damp القماش. تجنب استخدام المنظفات الكاشطة أو المذيبات التي قد تؤدي إلى إتلاف السطح.
- تقتيش: Regularly check the power cord and plug for any signs of damage. Ensure all mounting screws remain tight.
- تبديد الحرارة: The fixture is designed with a fin-type heat sink. Ensure it is not obstructed to allow for efficient heat dissipation.
7. استكشاف الأخطاء وإصلاحها
If you encounter issues with your LED Shop Light, refer to the following common solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الضوء لا يعمل. | No power supply; faulty switch; loose connection. | Check if the plug is securely inserted and the power outlet is functional. Ensure the in-line switch is ON. Inspect the power cord for damage. |
| وميض الضوء. | مصدر طاقة غير مستقر، اتصال فضفاض. | Ensure the power supply is stable. Check all connections for tightness. |
| انخفاض السطوع. | Dirt or debris on the glass cover. | Clean the glass cover with a soft, damp قطعة قماش. |
8. المواصفات
| ميزة | التفاصيل |
|---|---|
| ماركة | أونفورو |
| رقم الموديل | سي تي 08 |
| واتtage | 100 واط |
| سطوع | 14000 لومن |
| درجة حرارة اللون | 6500 كلفن (أبيض ضوء النهار) |
| مادة | ألومنيوم، زجاج مقسّى |
| مستوى مقاومة الماء | IP66 مقاوم للماء |
| أبعاد المنتج | 15.27 بوصة طول × 3.46 بوصة عرض × 1.37 بوصة ارتفاع |
| زاوية الشعاع | 120° |
| ميزة خاصة | With Plug, Thick die-cast aluminum, Waterproof, Not Dimmable |
9. الضمان والدعم
Onforu products come with a limited warranty. For specific warranty details or technical support, please refer to the official Onforu webالموقع أو الاتصال بخدمة العملاء.
Optional protection plans are available for purchase separately:
- خطة الحماية لمدة عامين
- خطة الحماية لمدة عامين
- حماية كاملة (اشتراك شهري)
لمزيد من المساعدة، قم بزيارة متجر Onforu على أمازون.





