Insta360 Suction Cup Mount Instruction Manual

1. انتهى المنتجview

The Insta360 Suction Cup Mount is designed for securely attaching your Insta360 camera to smooth, flat surfaces, such as car windows or body panels. Its robust design and adjustable double ball mount allow for versatile camera positioning to capture a wide range of perspectives.

• Designed for Versatility: Ideal for mounting your Insta360 camera inside or on your vehicle.
• Adjustable Double Ball Mount: Provides maximum adjustability for achieving various camera angles.
• كأس شفط قوي: Ensures a firm and reliable attachment to smooth, flat surfaces.
• بناء متين: Made from tough, high-strength aluminum alloy.
• صغير الحجم وقابل للحمل: Small, foldable design for easy storage and transport.

الشكل 1: الجبهة view of the Insta360 Suction Cup Mount. This image displays the mount's main components, including the suction cup base, the double ball arm, and the camera attachment point.

2. تعليمات الإعداد

1. إعداد سطح التركيب: Ensure the surface where the suction cup will be attached is clean, dry, and smooth. Wipe away any dust, dirt, or moisture.
2. قم بتوصيل الكاميرا: Secure your Insta360 camera to the mount's attachment point. Ensure it is firmly tightened.
3. Position the Suction Cup: Press the suction cup firmly against the prepared surface. Flip the lever on the suction cup base to create a vacuum seal, securing the mount in place.
4. Verify Suction: Gently tug on the mount to ensure it is securely attached before mounting your camera.

الشكل 2: الجزء العلوي view of the suction cup base. This image highlights the lever mechanism used to activate the vacuum seal for secure attachment.

3. تعليمات التشغيل

1. ضبط الزاوية: Loosen the central knob on the double ball mount to adjust the camera's angle. The double ball design allows for extensive flexibility in positioning.
2. Securing the Angle: Once the desired angle is achieved, tighten the central knob firmly to lock the mount in position.
3. الاستخدام الموصى به: For optimal performance and safety, ensure the mount is used on clean, non-porous, and flat surfaces. Avoid mounting on textured or curved surfaces.

الشكل 3: الجانب view of the mount, illustrating the double ball joint for angle adjustments. The central knob is used to loosen and tighten the joints.

Figure 4: An Insta360 camera securely mounted on a car hood using the suction cup mount, demonstrating a typical outdoor application.

4. الصيانة

• تنظيف كأس الشفط: Regularly clean the rubber suction cup with mild soap and water to remove any residue that could impair its grip. Allow it to air dry completely.
• فحص الضرر: Periodically check the suction cup and the mount's components for any signs of wear, cracks, or damage. Replace if necessary.
• تخزين: Store the mount in a clean, dry place away from direct sunlight and extreme temperatures to preserve the integrity of the rubber suction cup.

5. استكشاف الأخطاء وإصلاحها

• شفط ضعيف: If the mount does not adhere properly, ensure the mounting surface is perfectly clean, dry, and smooth. Avoid porous or textured surfaces. Extreme temperatures can also affect suction; try to mount in moderate conditions.
• جبل يشعر فضفاضة: Re-tighten all adjustment knobs on the double ball mount. Ensure the suction cup lever is fully engaged.

6. المواصفات

7. الضمان والدعم

For warranty information and technical support, please refer to the official Insta360 webالموقع أو تواصل مع خدمة العملاء مباشرةً. احتفظ بإثبات الشراء لأي مطالبات بالضمان.

Visit the official Insta360 Store: Insta360 Store