دليل مستخدم جهاز توجيه الإنترنت اللاسلكي Netcomm IFWA 40

مقدمة

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Netcomm Wireless Internet Router IFWA 40. This device is designed to provide reliable 4G LTE Wi-Fi connectivity, allowing you to connect up to 20 devices and create a Wireless Local Area Network (WLAN) anywhere.

المنتج انتهىview

مؤشرات اللوحة الأمامية

The front panel of the IFWA 40 features several LED indicators that provide status information about the device's operation.

• مؤشر الطاقة LED: يشير إلى حالة الطاقة للجهاز.
• Voicemail LED: Indicates new voicemail messages (if phone service is configured).
• مؤشر LED لشبكة Wi-Fi: يظهر حالة شبكة Wi-Fi.
• معلومات LED: Provides general status or notification alerts.
• بطارية LED: Displays the battery charge level and charging status.
• Signal Bars: Indicates the strength of the 4G LTE cellular signal.

الشكل 1: الجبهة view of the Netcomm IFWA 40 Wireless Internet Router, showing the AT&T logo and a row of LED indicators for power, voicemail, Wi-Fi, information, battery, and signal strength.

الشكل 2: جبهة أخرى view of the Netcomm IFWA 40 Wireless Internet Router, highlighting its compact design and the arrangement of the status indicator lights.

المنافذ والأزرار الموجودة باللوحة الخلفية

The rear panel provides connectivity options and control buttons.

• منفذ LAN: One Gigabit Ethernet (1000Mbps) port for wired network connections.
• منافذ الهاتف: Two Analog Phone Jacks for connecting landline phones.
• زر التشغيل/الإيقاف: Power button for turning the device on or off.
• منفذ الطاقة: لتوصيل محول الطاقة المتردد.
• زر إعادة الضبط: يُستخدم لإعادة ضبط الجهاز إلى إعدادات المصنع الافتراضية.
• منافذ الهوائي: Two SMA cellular antenna ports for external antennas to improve signal reception.

الشكل 3: خلفي view of the Netcomm IFWA 40 Wireless Internet Router, displaying the LAN port, two phone ports, power input, on/off button, reset button, and two external antenna ports.

اللوحة الجانبية

The side of the device features a WPS button for easy Wi-Fi Protected Setup.

• زر WPS: For quickly connecting WPS-compatible devices to the Wi-Fi network without entering a password.

الشكل 4: الجانب view of the Netcomm IFWA 40 Wireless Internet Router, showing the WPS (Wi-Fi Protected Setup) button.

الرسم التخطيطي العام

Figure 5: Comprehensive diagram illustrating the various components and ports of the Netcomm IFWA 40 Wireless Internet Router, including front panel LEDs, rear ports (Ethernet, Phone, AC Adapter, Antenna), and the Battery/SIM Tray location.

يثبت

1. أدخل بطاقة SIM

The Netcomm IFWA 40 uses a Nano SIM card. Locate the SIM card slot, typically found under the battery cover or in a dedicated tray. Carefully insert your activated Nano SIM card into the designated slot until it clicks into place.

2. توصيل الطاقة

Connect the provided AC power adapter to the Power port on the rear of the router and then plug the adapter into a wall outlet. The Power LED on the front panel should illuminate.

3. قم بتشغيل الجهاز

Press the On/Off button on the rear panel to power on the router. Wait for the device to boot up. The Signal bars LED should eventually show signal strength, indicating a successful connection to the 4G LTE network.

4. توصيل الأجهزة

• واي فاي: Locate the Wi-Fi network name (SSID) and password, usually found on a label on the bottom of the router. Connect your Wi-Fi enabled devices (phones, tablets, laptops) to this network. The router supports dual-band Wi-Fi and can connect up to 20 devices simultaneously.
• إيثرنت: For wired connections, connect an Ethernet cable from the LAN port on the router to your computer or other network device.
• هاتف: Connect analog phones to the Phone ports if you are using the voice service feature.

5. Access Control Panel

To manage settings, access the router's control panel by opening a web browser on a connected device and navigating to att.wirelessinternet or 192.168.0.1. Log in using the default credentials (usually found on the router's label or in the quick start guide).

تعليمات التشغيل

اتصال واي فاي

The router provides a robust Wi-Fi network. Ensure your devices are within range for optimal performance. The dual-band Wi-Fi allows for flexible connection options, with 10 devices per band for a total of 20 Wi-Fi connections.

وظيفة WPS

For quick and secure Wi-Fi connections with WPS-compatible devices, press the WPS button on the side of the router, then activate WPS on your client device within two minutes.

النسخ الاحتياطي للبطارية

The Netcomm IFWA 40 includes a removable 3000mAh Li-ion battery. In the event of a power outage, the device can operate on battery power for up to 29 hours in standby mode and provide up to 180 minutes of active use time.

صيانة

• تنظيف: Use a soft, dry cloth to clean the exterior of the router. Avoid using liquid cleaners or aerosols.
• تهوية: Ensure the router is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
• تحديثات البرامج الثابتة: Periodically check the router's control panel for available firmware updates to ensure optimal performance and security.
• العناية بالبطارية: If the device is not used for extended periods, it is recommended to fully charge the battery and store it in a cool, dry place.

استكشاف الأخطاء وإصلاحها

لا يوجد اتصال بالإنترنت

• Check the Signal bars LED on the front panel. If no signal is present, try repositioning the router or connecting external antennas.
• Ensure your Nano SIM card is properly inserted and activated with your service provider.
• Verify that the router's power adapter is securely connected and the Power LED is on.
• أعد تشغيل جهاز التوجيه عن طريق إيقاف تشغيله ثم إعادة تشغيله مرة أخرى.

مشكلات الاتصال بالواي فاي

• Ensure the Wi-Fi LED is illuminated.
• Check that you are entering the correct Wi-Fi password (SSID and password are on the router's label).
• حاول الاقتراب من جهاز التوجيه لتحسين قوة الإشارة.
• If many devices are connected, try disconnecting some to see if performance improves.

الجهاز لا يستجيب

• If the router becomes unresponsive, press and hold the Reset button on the rear panel for about 10 seconds to restore factory default settings. ملحوظة: This will erase all custom settings, including Wi-Fi name and password.

تحديد

الضمان والدعم

This Netcomm Wireless Internet Router IFWA 40 is a renewed product. As such, it is covered by the ضمان أمازون المتجدد. If you are not satisfied with your purchase, renewed products are eligible for replacement or refund under this guarantee. Please refer to the Amazon Renewed program terms and conditions for full details regarding warranty coverage and support for renewed products.

For further assistance, please contact Amazon customer support or refer to the Amazon Renewed program documentation.