1. انتهى المنتجview
This manual provides detailed instructions for the setup, operation, and maintenance of your ELECROW 7 Inch Touchscreen Monitor, Model RC070S. Please read thoroughly before use.
الموديل: RC070S
العلامة التجارية: ELECROW
The ELECROW 7-inch IPS touchscreen offers a 1024x600 resolution, adjustable via software to 1920x1080. It features vivid colors, a 178° viewing angle, and a durable, scratch-resistant tempered glass touch panel. Designed for plug-and-play functionality, it connects via HDMI for video and USB for power and touch control, requiring no additional drivers. It is compatible with various devices including Raspberry Pi 5/4/3B+/3B/2B+, Banana Pi, Jetson Nano, PCs, laptops, and gaming consoles. The monitor supports 5-point capacitive touch on Windows 11/10/8/7 and single-touch on Raspberry Pi and Jetson Nano. Integrated dual speakers and a 3.5mm headphone jack provide immersive audio, with adjustable volume and backlight settings.
2. محتويات العبوة
- 1 x 7 Inch IPS Monitor
- 1 x USB to Micro USB Connector
- 1 x HD to Micro HD Connector
- 1 × كابل USB إلى Micro USB
- 1 x HD to HD Cable
- 4 × مسامير M2.5
- 2 × مسامير M3
- 2 × مكبرات الصوت
- 2 × حامل احترافي
- 4 x Small Copper Pillars
3. المواصفات الفنية
| ميزة | مواصفة |
|---|---|
| حجم شاشة العرض | 7 بوصة |
| نوع اللوحة | اي بي اس |
| نوع اللمس | 5-point Capacitive Touch |
| دقة | 1024 x 600 Pixels (Software adjustable to 1920x1080) |
| سطوع | 260 شمعة/م² |
| Viewزاوية جي | 178 درجة (أفقية) / 178 درجة (رأسية) |
| معدل التحديث | 60 هرتز |
| منافذ HDMI | 1 |
| منافذ USB | 1 (for power and touch) |
| مخرج الصوت | 3.5mm Audio Jack, Built-in Dual Speakers |
| حجم الإدخالtage | 5 فولت |
| إجمالي الطاقة (الحد الأقصى) | 2.55 واط |
| درجة حرارة التشغيل | -20 درجة مئوية ~ 60 درجة مئوية |
| درجة حرارة التخزين | -30 درجة مئوية ~ 70 درجة مئوية |
| أبعاد المنتج | 1 × 6.5 × 4 بوصة |
| وزن العنصر | 8.3 أونصات |
| أنظمة التشغيل المدعومة | Windows 11/10/8/7, Raspbian, Ubuntu, Kali, Retropie, Jetson Nano |
4. الإعداد والتثبيت
4.1 General Assembly
To set up the monitor, first attach the included stands to the bottom of the display using the provided screws. Ensure the protective film is removed from the stands before assembly.
4.2 Raspberry Pi Connection
For Raspberry Pi connections, use the provided HDMI cable for video and the USB cable for power and touch functionality. For Raspberry Pi 4 and 5, use the included Micro-HDMI to HDMI adapter. No drivers are required for basic functionality.
مهم: For Raspberry Pi 4, if using a system image after 2021-10-30 (e.g., Bullseye), modify dtoverlay = vc4-kms-v3d ل dtoverlay = vc4-fkms-v3d في config.txt file. For Buster, comment out dtoverlay = vc4-fkms-V3D by adding a '#' at the beginning of the line.
Video 1: Step-by-step guide on how to install the 7-inch screen with a Raspberry Pi, demonstrating cable connections and initial setup.
Video 2: Instructions on how to install the Raspberry Pi board with the screen, detailing the physical mounting and connections.
4.3 اتصال الكمبيوتر
Connect the monitor to your PC or laptop using the HDMI cable for video and the USB cable for power and touch. The monitor is driver-free for Windows 11/10/8/7. Adjust display settings on your PC for optimal resolution.
5. تشغيل الشاشة
5.1 وظيفة اللمس
The monitor features a 5-point capacitive touchscreen for multi-touch gestures on Windows and single-touch on Raspberry Pi and Jetson Nano. Ensure the USB cable is connected to enable touch input.
5.2 قائمة العرض على الشاشة (OSD)
The monitor includes tactile buttons on the side for navigating the OSD menu. These buttons allow adjustment of various display settings:
- صورة: Adjust backlight, brightness, contrast, and sharpness.
- لون: Modify panel uniformity, gamma, temperature, and color effects.
- يتقدم: Set aspect ratio.
- صوتي: التحكم في مستوى الصوت وكتم الصوت.
5.3 ميزات الصوت
The monitor is equipped with built-in dual speakers and a 3.5mm headphone jack for audio output. Digital audio output is also supported via HDMI.
6. استكشاف الأخطاء وإصلاحها
- Monitor not powering on: Ensure the power cable (USB-A to C) is properly plugged into both the Raspberry Pi/PC and the monitor.
- Image is reversed: The monitor does not support image flip.
- No touch functionality: Verify the USB-A to C cable is securely connected between the host device and the monitor.
- No signal on display: Ensure the HDMI cable is properly connected between the host device and the monitor. If using a mini HDMI port, ensure the correct adapter is used.
- Speakers at high volume cause issues: When speakers are at 80% or more volume, connect the power port (not touch port) to provide full power.
7. ملاحظات مهمة
- The Raspberry Pi cannot be powered by powering the screen.
- Always connect the power interface when powering the screen. Supplying power through the touch interface may lead to insensitive or unusable touch functionality.
8. الضمان والدعم
ELECROW products offer a one-year warranty. For quality-related issues, you may return any undamaged product within 12 months for a refund or replacement. Shipping costs and charges are not included.
For support or inquiries, please contact ELECROW customer service:
- Webموقع: www.eyoyousa.com
- بريد إلكتروني: support@eyoyomonitor.com
- هاتف: 909-317-8588 (9:00 AM–5:00 PM; Monday–Friday)
- USA Office Address: 10700 Jersey Blvd Ste 640, Rancho Cucamonga, CA 91730, USA
