دليل مستخدم جهاز فحص الأعطال FOXWELL NT614 Elite OBD2

1. المقدمة

The FOXWELL NT614 Elite is an advanced OBD2 diagnostic scanner designed for comprehensive vehicle system analysis and maintenance. This device provides access to engine, Anti-lock Braking System (ABS), Supplemental Restraint System (SRS), and Transmission diagnostics, in addition to five key service reset functions. This manual outlines the proper procedures for setting up, operating, and maintaining your NT614 Elite scanner.

Figure 1.1: The FOXWELL NT614 Elite OBD2 Scanner and its protective case.

2. انتهى المنتجview

2.1 الميزات الرئيسية

• 4-System Diagnostics: Reads and clears fault codes, and displays live data for Engine, ABS, SRS, and Transmission systems.
• 5 Service Reset Functions: Includes ABS Bleeding, Oil Reset, Steering Angle Sensor (SAS) Calibration, Electronic Parking Brake (EPB) Reset, and Throttle Reset.
• وظائف OBD2 الكاملة: Supports all 10 OBD2 test modes, including I/M Readiness, Live Data Stream, Freeze Frame, O2 Sensor Test, On-Board Monitor Test, Component Test, and Vehicle Information retrieval.
• Lifetime Free WiFi Updates: Provides continuous software updates via WiFi for expanded vehicle coverage and new features.
• اختبار البطارية: يعرض مستوى شحن البطارية في الوقت الفعليtagللتقييم الصحي.
• AutoVIN: Automatically identifies vehicle information for quicker diagnostics (manual VIN entry required for some vehicles).
• بحث DTC: Built-in library for quick fault code definitions.
• رسم البيانات المباشرة: Displays multiple data streams simultaneously in graphical format.

2.2 ما هو المشمول

The package for the FOXWELL NT614 Elite includes the following components:

• 1x NT614 Elite Scanner Unit
• 1 × حافظة حماية
• 1x Diagnostic Cable (OBDII 16-pin)
• 1 × كابل يو اس بي
• 1 × دليل المستخدم
• 1x الدليل السريع

Figure 2.1: Contents of the NT614 Elite package.

3. الإعداد

Follow these steps to prepare your NT614 Elite scanner for use:

1. الاتصال بالمركبة: Locate your vehicle's OBDII port, typically found under the dashboard on the driver's side. Plug the diagnostic cable (16-pin) from the NT614 Elite into the vehicle's OBDII port.
2. تشغيل السيارة: Turn the vehicle's ignition to the 'ON' position without starting the engine. This provides power to the OBDII port and the scanner.
3. Scanner Initialization: The NT614 Elite will power on automatically. Follow the on-screen prompts to begin diagnosis or select desired functions.

Figure 3.1: Connection steps for the NT614 Elite scanner.

4. تعليمات التشغيل

4.1 4-System Diagnosis (Engine, ABS, SRS, Transmission)

The NT614 Elite can diagnose four core vehicle systems:

• نظام المحرك: Reads and clears fault codes, displays real-time operating status, and turns off warning lights to ensure proper engine function.
• نظام ABS: Diagnoses issues causing ABS warning lights, reads and clears ABS error codes, and helps prevent wheel locking and skidding.
• نظام SRS: Accesses electronic parameters in the airbag system to diagnose malfunctions and locate faulty components, ensuring safety system functionality.
• نظام النقل: Reads and clears diagnostic codes from the transmission system, and displays live data to assess speed and load matching with transmission output.

الشكل 4.1: انتهىview of 4-System Diagnosis capabilities.

4.2 5 Service Reset Functions

The NT614 Elite provides five essential maintenance reset functions:

• نزيف ABS: Safely removes air from the brake system after component replacement, restoring firm brake pedal feel.
• إعادة ضبط فرامل الانتظار الإلكترونية: Allows service and maintenance of electronic parking brake systems, including deactivation, activation, bleeding brake fluid, and setting brakes after pad replacement.
• إعادة ضبط الزيت: Resets the oil life reminder and switches off the oil light after an oil change, ensuring accurate engine oil life calculation.
• معايرة ساس: Resets the steering angle sensor to its relative zero position, helping to clear incorrect memory and calibrate the sensor.
• Throttle Reset: Performs throttle body relearn (Idle Relearn) to achieve smooth idle speed after replacing electronic throttle body, disconnecting battery, or clearing a check engine light.

Figure 4.2: Visual representation of the 5 Hot Reset functions.

4.3 وظائف OBD2 الكاملة

The NT614 Elite supports all standard OBD2 functions, enabling comprehensive emissions-related diagnostics:

• قراءة رموز الأعطال (DTCs)
• مسح رموز الأعطال التشخيصية (DTCs)
• حالة جاهزية نظام إدارة المعلومات
• بث البيانات المباشر
• تجميد بيانات الإطار
• اختبار حساس الأكسجين
• اختبار المراقبة على متن الطائرة
• اختبار المكون
• Retrieve Vehicle Information (VIN, CIN, CVN)
• EVAP Test (Evaporative Emission System Test)

الشكل 4.3: انتهىview وظائف OBD2 الكاملة.

4.4 رسم البيانات الحية

The scanner can display multiple live data streams simultaneously in graphical format, allowing for visual analysis of vehicle performance parameters such as RPM, speed, transmission temperature, and fuel system status.

Figure 4.4: Live Data Graphing interface.

4.5 مكتبة DTC

Access fault code meanings quickly through the exclusive built-in DTC library menu for faster identification of issues.

Figure 4.5: DTC Library feature.

4.6 Battery Health Check

The NT614 Elite can display real-time battery voltage, allowing you to monitor the vehicle's battery health.

Figure 4.6: Battery Health Check display.

5. الصيانة

5.1 تحديثات البرامج

The NT614 Elite supports lifetime free software updates via WiFi. Regular updates ensure expanded vehicle coverage, bug fixes, and new features. To update the software:

1. Navigate to the 'Settings' menu on the scanner.
2. Select 'WiFi' and connect to an available wireless network.
3. Once connected, select 'Update' from the main menu or settings.
4. Choose the software packages you wish to update and follow the on-screen instructions.

Figure 5.1: Steps for performing a WiFi software update.

6. استكشاف الأخطاء وإصلاحها

If you encounter issues with your NT614 Elite scanner, consider the following:

• لا يوجد طاقة: Ensure the diagnostic cable is securely connected to both the scanner and the vehicle's OBDII port. Verify the vehicle's ignition is in the 'ON' position.
• خطأ في الاتصال: Check that the vehicle's ignition is on. Ensure the diagnostic cable is not damaged. Try connecting to a different vehicle to rule out a vehicle-specific issue.
• مشاكل تحديث البرامج: Verify a stable WiFi connection. Ensure sufficient battery charge on the scanner. If issues persist, contact technical support.
• Function Not Supported: Vehicle compatibility for specific functions (e.g., ABS Bleeding) varies by make, model, and year. Refer to the compatibility list on the FOXWELL website or contact support for verification.

For further assistance, refer to the support section of the FOXWELL webالموقع أو الاتصال بخدمة العملاء.

7. المواصفات

الشكل 7.1: ملصق المنتج مع المواصفات التفصيلية.

8. معلومات التوافق

The NT614 Elite is compatible with over 10,000 vehicle models from more than 90 brands, including cars, SUVs, minivans, and light trucks. Compatibility for specific functions may vary by vehicle make, model, and year.

To check specific vehicle compatibility:

1. Visit the official FOXWELL website (foxwelltech.us).
2. Navigate to the 'Support' section and select 'Coverage List'.
3. Enter 'NT614 Elite' as the product model.
4. Select your vehicle's brand, model, and year to view compatible functions.

Figure 8.1: Broad vehicle compatibility of the NT614 Elite.

Figure 8.2: Guide to checking vehicle compatibility online.

9. الضمان والدعم

The FOXWELL NT614 Elite comes with a 2-year reliable warranty. FOXWELL provides lifetime free software updates and 24-hour technical support to assist with any product-related inquiries or issues.

For technical support, please visit the official FOXWELL webالموقع أو الاتصال بفريق خدمة العملاء.

الشكل 9.1: معلومات الضمان والدعم.