مقدمة
This manual provides detailed instructions for the safe installation, operation, and maintenance of the Lithonia Lighting ZL1D L24 LED Striplight. Please read this manual thoroughly before installation and retain it for future reference.
Image: Lithonia Lighting ZL1D L24 LED Striplight, a long, white, rectangular LED fixture designed for surface mounting.
معلومات السلامة
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, and personal injury.
- فصل الطاقة: Ensure power is turned off at the circuit breaker or fuse box before installation or servicing.
- كهربائي مؤهل: Installation should be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
- التأريض: Properly ground the fixture to avoid potential electrical shock.
- التوصيلات الكهربائية: Inspect wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If damage is present, do not attempt installation.
- بيئة التشغيل: This fixture is designed for indoor use in damp locations, with an operating temperature range of -20°C to 35°C (-4°F to 86°F). Do not install in areas exceeding these conditions.
- التعامل: Handle the fixture with care to prevent damage to LED components.
محتويات الحزمة
Verify that all components are present before beginning installation. The package should contain:
- Lithonia Lighting ZL1D L24 LED Striplight fixture
- Installation hardware (e.g., mounting screws, wire nuts)
- ورقة التعليمات (هذه الوثيقة)
تحديد
| نموذج | ZL1D L24 3500LM FST MVOLT 35K 80CRI WH |
| يكتب | LED Surface Mount Fixture / Strip Light |
| الطول الاسمي | 24 بوصة |
| العرض الاسمي | 2-1/4 inches (2.25 inches) |
| الارتفاع الاسمي | 3 inches (2-63/64 inches) |
| Max. Fixture Wattage | 36.0 واط |
| لاعبا اساسياtage | 120 إلى 277 فولت |
| لومن | 4190 لومن |
| لومن لكل واط | 116.4 لومن/وات |
| درجة حرارة اللون | 3500 كلفن (أبيض ساطع) |
| مؤشر تجسيد اللون (CRI) | 80.0 |
| قابلة للتعتيم | Yes (Dimmer switch required, Control Method: Remote/Button Control) |
| تصنيف الحياة | 100,000 ساعات |
| مواد الإسكان | فُولاَذ |
| تصنيف IP | Not Rated (Suitable for Damp المواقع) |
| الشهادات | CSA Certified (US and Canadian Safety Standards), DesignLights Consortium (DLC) |
| Environmental Attribute | Product Contributes To Reducing Energy Consumption |
الإعداد والتثبيت
This fixture is designed for surface mounting. Installation may also involve chain, aircraft cable, or stem mounting (accessories sold separately). Always ensure power is disconnected before proceeding.
- تحضير منطقة التثبيت:
- قم بإيقاف تشغيل الطاقة في قاطع الدائرة أو صندوق المصاهر.
- Identify the desired mounting location. Ensure the surface is structurally sound to support the fixture's weight.
- Run electrical supply wires to the mounting location, if not already present.
- تركيب التركيبات:
- Carefully remove the fixture from its packaging.
- Position the fixture against the mounting surface and mark the locations for mounting screws.
- قم بحفر ثقوب تجريبية إذا لزم الأمر.
- Secure the fixture to the mounting surface using appropriate screws (not always included, check package contents).
- التوصيلات الكهربائية:
- Connect the fixture's black wire to the supply's hot (black) wire.
- Connect the fixture's white wire to the supply's neutral (white) wire.
- Connect the fixture's ground wire to the supply's ground wire (bare copper or green).
- Use approved wire connectors (wire nuts) for all connections and ensure they are secure.
- If installing a dimmer switch, follow the dimmer manufacturer's instructions for wiring. This fixture is dimmable.
- الخطوات النهائية:
- Carefully tuck all wires into the junction box or fixture housing.
- Ensure all covers or diffusers are securely attached to the fixture.
- استعادة الطاقة عند قاطع الدائرة.
- Test the fixture to ensure proper operation.
تعليمات التشغيل
The Lithonia Lighting ZL1D L24 LED Striplight is designed for straightforward operation.
- تشغيل/إيقاف التشغيل: Once installed and power is restored, the fixture will turn on/off via the wall switch connected to its electrical circuit.
- وظيفة التعتيم: If connected to a compatible dimmer switch, adjust the dimmer control to achieve the desired light output. This fixture supports dimming.
صيانة
The LED Striplight requires minimal maintenance due to its long-life LED technology.
- تنظيف: افصل الطاقة قبل التنظيف. استخدم قطعة قماش ناعمة وجافة أو مبللة قليلاً.amp cloth to wipe the exterior surfaces. Avoid abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or optical components.
- المصابيح: The LEDs are integrated and not user-replaceable. Do not attempt to open the fixture to replace individual LEDs.
- تقتيش: قم بفحص التركيبات بشكل دوري بحثًا عن أي علامات تلف أو وصلات مفكوكة.
استكشاف الأخطاء وإصلاحها
If the fixture does not operate correctly, consult the following troubleshooting guide:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الضوء لا يعمل. | لا قوة لاعبا اساسيا. | Check circuit breaker or fuse. Ensure wall switch is in the "ON" position. Verify electrical connections. |
| يتذبذب الضوء أو يخفت بشكل غير متوقع. | Loose wiring connection; Incompatible dimmer switch; Voltagتقلبات البريد. | Turn off power and check all wire connections. Ensure the dimmer switch is compatible with LED fixtures. Consult an electrician if voltagهناك اشتباه في وجود مشاكل. |
| إن إنتاج الضوء أقل من المتوقع. | Dimmer setting too low; Dust accumulation on diffuser. | Adjust dimmer to maximum setting. Clean the diffuser with a soft cloth. |
If issues persist after attempting these solutions, contact a qualified electrician or Lithonia Lighting customer support.
الضمان والدعم
The Lithonia Lighting ZL1D L24 LED Striplight comes with a ضمان محدود لمدة سنة واحدة من تاريخ الشراء. يغطي هذا الضمان عيوب المواد والصناعة في ظل الاستخدام العادي.
For warranty claims, technical assistance, or further support, please contact Lithonia Lighting customer service. Keep your purchase receipt as proof of purchase.
For more information, visit the official Lithonia Lighting webيمكنك زيارة الموقع أو الرجوع إلى معلومات الاتصال المرفقة مع عملية الشراء.
