1. المقدمة
Image: The Festool Rotex RO 125 FEQ-Plus Random Orbital Sander, accompanied by its Systainer storage case, detachable power cord, a sanding pad, and an edge protector, laid out on a white surface.
The Festool Rotex RO 125 FEQ-Plus Random Orbital Sander is designed for both rapid material removal and fine finishing. It offers dual-mode sanding, allowing users to switch between aggressive rotary random orbital motion for coarse sanding and polishing, and random orbital motion for fine sanding. This compact 5-inch sander is ideal for various tasks, providing powerful performance in a lightweight and maneuverable package. Its integrated Jet Stream dust extraction system ensures a cleaner workspace and extends abrasive life. The removable edge protector allows for precise sanding near adjacent surfaces without causing damage.
2. الإعداد
2.1 فك العبوة والتفتيش
Carefully remove all components from the Systainer3. Inspect the sander and accessories for any signs of damage during transit. Ensure all included components are present:
- ساندر
- StickFix Sanding Pad
- حامي الحافة
- 1 Abrasive Sheet
- Plug-It Cord
- Systainer3 (storage case)
2.2 توصيل سلك الطاقة
The Festool Rotex RO 125 FEQ-Plus utilizes a detachable Plug-It Cord. Align the Plug-It Cord connector with the port on the sander and push firmly until it clicks into place. Ensure a secure connection before plugging the cord into a power outlet.
2.3 Attaching the Sanding Pad and Abrasive
- تأكد من فصل الصنفرة عن الكهرباء.
- Align the StickFix Sanding Pad with the base of the sander and press firmly to secure it. The FastFix system allows for tool-free pad changes.
- Attach the abrasive sheet to the StickFix Sanding Pad. The hook-and-loop design ensures easy and secure attachment.
2.4 Attaching the Edge Protector
For sanding close to edges or adjacent surfaces, attach the removable edge protector to prevent damage to both the workpiece and the sander.
3. تعليمات التشغيل
3.1 Dual-Mode Sanding
The Rotex RO 125 FEQ-Plus features two primary sanding modes:
- Rotary Random Orbital Motion (Aggressive Mode): This gear-driven mode provides rapid stock removal and is suitable for coarse sanding or polishing applications.
- Random Orbital Sanding Motion (Fine Mode): This mode is ideal for fine sanding, providing a smooth, swirl-free finish.
Switch between modes using the selector switch located on the top of the sander. Ensure the sander is off before changing modes.
3.2 التحكم في السرعة
The sander features variable speed control, allowing you to adjust the oscillation rate to match the material and desired finish. Use the speed dial to select the appropriate speed for your task. Lower speeds are generally used for fine finishing or delicate materials, while higher speeds are for aggressive material removal.
3.3 تشغيل/إيقاف التشغيل
To turn the sander on, press the power switch. To turn it off, press the switch again. Always ensure a firm grip on the sander before powering it on.
4. الصيانة
4.1 استخراج الغبار
The Jetstream dust extraction design is highly efficient. For optimal performance and a clean workspace, connect the sander to a compatible dust extractor. Regularly empty the dust bag or container of your dust extractor.
4.2 Changing Sanding Pads
The FastFix tool-free backing pad changing system makes replacing pads simple. To change a pad, ensure the sander is unplugged. Firmly pull the old pad off and press the new pad onto the base until it is securely attached.
4.3 التنظيف العام
After each use, wipe down the sander with a clean, dry cloth. Ensure no dust or debris accumulates in the ventilation slots or around the sanding pad. Do not use harsh chemicals or abrasive cleaners.
5. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Sander does not power on. | لا يوجد مصدر طاقة؛ سلك الطاقة غير موصول جيداً. | Check power outlet; ensure Plug-It Cord is securely connected. |
| Poor sanding results (e.g., swirl marks). | Worn abrasive; incorrect mode/speed; excessive pressure. | Replace abrasive; select appropriate mode/speed; apply even, light pressure. |
| الغبار المفرط. | Dust extractor not connected/clogged; worn sanding pad. | Connect/clear dust extractor; replace sanding pad if holes are blocked. |
6. المواصفات
| ميزة | التفاصيل |
|---|---|
| ماركة | فيستول |
| أبعاد المنتج | 15.59 بوصة طول × 11.65 بوصة عرض × 7.36 بوصة ارتفاع |
| نوع الحصى | خشن |
| مصدر الطاقة | كهرباء سلكية |
| تيار محول التيار المتردد | 4.2 Amps |
| رقم الحبيبات | 60 |
| قطر القرص | 5 بوصة |
| الشركة المصنعة | فيستول |
| رقم القطعة | 576032 |
| وزن العنصر | 8.26 رطل |
| بلد المنشأ | ألمانيا |
| رقم موديل السلعة | 576032 |
| كمية حزمة العنصر | 1 |
| هل تحتاج إلى بطاريات؟ | لا |
| تاريخ أول توفر | 2 سبتمبر 2020 |
7. المكونات المضمنة
The Festool Rotex RO 125 FEQ-Plus Random Orbital Sander package includes:
- ساندر
- StickFix Sanding Pad
- حامي الحافة
- 1 Abrasive Sheet
- Plug-It Cord
- New generation Systainer3 (fully compatible with current T-LOC Systainers and can be latched on top of Classic Systainer from 1993)
8. الضمان والدعم
8.1 معلومات الضمان
هذا المنتج مغطى بـ ضمان الشركة المصنعة لمدة عامينيرجى الاحتفاظ بإثبات الشراء الخاص بك لاستخدامه في المطالبات بالضمان.
8.2 دعم العملاء
For technical assistance, spare parts, or service inquiries, please refer to the official Festool webيمكنك زيارة الموقع الإلكتروني أو الاتصال بقسم خدمة العملاء. عادةً ما تجد معلومات الاتصال التفصيلية على عبوة المنتج أو على الموقع الرسمي للشركة المصنعة. webموقع.
