ZEBRONICS ZEB-BS1H1000 1D Laser Handheld Barcode Scanner User Manual

مقدمة

The Zebronics ZEB-BS1H1000 is a 1D laser handheld barcode scanner designed for efficient and accurate data capture. It features USB connectivity for easy integration with various systems, an inbuilt buzzer for scan confirmation, and an LED indicator for operational status. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your scanner.

Figure 1: Zebronics ZEB-BS1H1000 Handheld Barcode Scanner overview.

يثبت

Follow these steps to set up your ZEB-BS1H1000 barcode scanner:

1. فك التعبئة: Carefully remove the scanner and its USB cable from the packaging.
2. الاتصال بجهاز المضيف: Plug the USB cable from the scanner into an available USB port on your computer or compatible host device. The scanner is a plug-and-play device and typically does not require driver installation for basic functionality.
3. تشغيل الطاقة: The scanner will power on automatically once connected via USB. The LED indicator will illuminate, and a short beep from the buzzer will confirm it is ready for use.

Figure 2: Key features of the ZEB-BS1H1000, highlighting the USB interface and LED indicator.

تعليمات التشغيل

The ZEB-BS1H1000 is designed for simple and efficient barcode scanning.

• مسح الرمز الشريطي:

  Hold the scanner with a firm grip. Point the scanning window towards the barcode you wish to scan. Press and hold the trigger button. A red laser line will project from the scanning window. Position the laser line across the entire barcode. Once successfully scanned, the scanner will emit a beep (from the inbuilt buzzer) and the LED indicator will flash.

  

  Figure 3: Proper hand grip and trigger location for scanning.

• تأكيد المسح الضوئي: The audible beep and visual LED flash confirm a successful scan. The scanned data will be transmitted to your connected device as if typed from a keyboard.
• زاوية المسح: The scanner supports a wide range of scan angles for flexibility: Pitch: ±30°, Skew: ±45°, Roll: ±60°.
• ااغغ: The scanner operates at a rate of 200 scans per second for quick and efficient data capture.

Figure 4: ZEB-BS1H1000 in typical use environment.

صيانة

تضمن الصيانة المناسبة طول عمر وأداء مثالي لجهاز مسح الباركود الخاص بك.

• تنظيف: نظّف نافذة المسح الضوئي بانتظام بقطعة قماش ناعمة وخالية من الوبر. لإزالة الأوساخ العنيدة، امسحها برفق.ampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials that could scratch the window.
• تخزين: عند عدم الاستخدام، قم بتخزين الماسح الضوئي في بيئة نظيفة وجافة بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• التعامل: Handle the scanner with care. Avoid dropping it or subjecting it to strong impacts, which can damage internal components.
• سلامة الليزر: حذر: Avoid staring directly into the laser beam. While the laser is low-power, direct exposure to the eye should be avoided.

Figure 5: Close-up of the scanning window, showing laser and caution.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your ZEB-BS1H1000 scanner, refer to the following common problems and solutions:

تحديد

Detailed technical specifications for the Zebronics ZEB-BS1H1000 barcode scanner:

الضمان والدعم

For warranty information and technical support, please refer to the official Zebronics webالموقع أو تواصل مع خدمة العملاء. احتفظ بإيصال الشراء كإثبات للشراء في حال وجود أي مطالبات بالضمان.

You can visit the official ZEBRONICS store for more information: متجر زيبرونيكس على موقع أمازون الهند