دليل مستخدم جهاز التوجيه الصغير VONETS VAP11AC ثنائي النطاق AC1200 مكرر الجسر اللاسلكي

1. المقدمة

The VONETS VAP11AC is a versatile dual-band AC1200 wireless device designed to function as a WiFi Bridge, Repeater, Mini Router, WiFi to RJ45 Ethernet Adapter, and WiFi Hotspot Signal Extender. It supports both 2.4GHz and 5GHz wireless frequencies, offering a combined theoretical data transfer rate of up to 1200Mbps. This device is equipped with a smart cooling fan for stable operation and includes a 12V/1A power supply adapter.

This manual will guide you through the setup, configuration, and operation of your VAP11AC device to ensure optimal performance in various networking scenarios.

Figure 1.1: VONETS VAP11AC device with included accessories.

2. مواصفات المنتج

• Dual Band Wireless: Supports 2.4GHz (300Mbps) and 5GHz (900Mbps) for a total of 1200Mbps theoretical speed.
• أوضاع تشغيل متعددة: Functions as a WiFi Router, WiFi Signal Repeater, WiFi AP Hotspot, and WiFi Bridge.
• اتصال إيثرنت: Features one 10/100Mbps adaptive Ethernet port for wired connections.
• مروحة التبريد الذكية: Integrated fan for automatic heat dissipation, enhancing device stability.
• حجم واسعtage Power Input: Operates on DC5V-24V (typical 12V/1A), with a 12V/1A power supply included.
• تصميم مضغوط: Mini industrial design suitable for various environments.
• Signal Strength Detection (SSA): Supports reporting of signal strength.
• Memory Hotspot Function: Automatically connects to up to 100 remembered hotspots.

Figure 2.1: VAP11AC highlighting its dual-band 1200Mbps capabilities.

3. دليل الإعداد

3.1 محتويات العبوة

قبل المتابعة، تأكد من وجود جميع العناصر:

• VONETS VAP11AC Device
• 12V/1A Power Supply Adapter
• Ethernet Cable (approx. 30cm with RJ45 connector)
• Power Cable (approx. 30cm with DC and USB ports)

3.2 الاتصال الأولي

1. Connect the power cable to the VAP11AC device's DC port.
2. Plug the 12V/1A power adapter into a power outlet and connect it to the power cable.
3. Wait for the device to power on. The LED indicators will illuminate.
4. For initial configuration, connect your computer to the VAP11AC device using the provided Ethernet cable. Alternatively, you can connect wirelessly to the VAP11AC's default WiFi network (SSID and password typically found on the device label or in the quick start guide).

3.3 Web الوصول إلى الواجهة

1. افتح web تصفح الإنترنت على جهاز الكمبيوتر المتصل.
2. أدخل عنوان IP الافتراضي (على سبيل المثال، 192.168.254.254) في شريط العناوين واضغط على Enter.
3. Log in using the default username and password (refer to the device label or quick start guide for credentials).
4. Once logged in, you can configure the device's operating mode and network settings.

Figure 3.1: VAP11AC with power and Ethernet connections.

4. أوضاع التشغيل

The VAP11AC supports several operating modes to suit different networking requirements.

4.1 وضع جسر الواي فاي

In Bridge mode, the VAP11AC converts a WiFi signal into a wired Ethernet connection. This is ideal for devices that only have an Ethernet port but need to connect to a wireless network, such as desktop computers, network printers, surveillance cameras, or DVRs.

1. الوصول إلى web interface and select Bridge mode.
2. Scan for available WiFi networks and select your desired network.
3. Enter the WiFi password if required.
4. Connect your wired device to the VAP11AC's Ethernet port.

Figure 4.1: VAP11AC in WiFi Bridge mode.

4.2 وضع مكرر واي فاي

Repeater mode extends the coverage of an existing WiFi network. The VAP11AC receives the wireless signal from your main router and re-broadcasts it, eliminating dead zones and improving signal strength in areas with weak coverage.

1. الوصول إلى web interface and select Repeater mode.
2. Scan for available WiFi networks and select the network you wish to extend.
3. Enter the WiFi password. The VAP11AC will then extend this network.

Figure 4.2: VAP11AC in WiFi Repeater mode and AP application.

4.3 وضع موجه الواي فاي

In Router mode, the VAP11AC acts as a primary router, creating a new wireless network. This is suitable for scenarios where you have a wired internet connection (e.g., from a modem) and need to share it wirelessly with multiple devices.

1. الوصول إلى web interface and select Router mode.
2. Configure WAN settings (e.g., DHCP, Static IP, PPPoE) based on your internet service provider.
3. Set up your new WiFi network's SSID and password.
4. Connect your modem's Ethernet cable to the VAP11AC's Ethernet port.

Figure 4.3: VAP11AC in WiFi Router mode.

4.4 وضع نقطة الوصول (AP)

AP mode allows the VAP11AC to create a wireless network from an existing wired network. This is useful for adding WiFi capabilities to a wired-only network, such as in hotel rooms or offices.

1. الوصول إلى web interface and select AP mode.
2. Configure the SSID and password for the new wireless network.
3. Connect the VAP11AC's Ethernet port to your wired network.

الشكل 4.4: انتهىview of VAP11AC application modes.

5. الصيانة

5.1 Smart Cooling Fan

The VAP11AC features a smart cooling fan designed to activate automatically after 5-10 minutes of normal operation to dissipate heat and ensure stable performance. The fan will also automatically shut down when cooling is no longer required.

This fan function can be configured manually via the web interface, allowing you to disable it, set it to automatic control, or periodic automatic control.

Figure 5.1: VAP11AC with smart cooling fan in operation.

5.2 العناية العامة

• Keep the device in a well-ventilated area to assist with heat dissipation.
• تجنب تعريض الجهاز لدرجات حرارة شديدة أو رطوبة أو أشعة الشمس المباشرة.
• Clean the device periodically with a soft, dry cloth. Do not use liquid cleaners.
• تأكد من توصيل كافة الكابلات بشكل آمن.

6. استكشاف الأخطاء وإصلاحها

6.1 الجهاز لا يعمل

• Verify the power adapter is correctly connected to the device and a working power outlet.
• Ensure the power adapter is the correct 12V/1A type provided with the device.

6.2 تعذر الوصول Web الواجهة

• Confirm your computer is connected to the VAP11AC via Ethernet or its default WiFi network.
• Ensure your computer's IP settings are configured to obtain an IP address automatically (DHCP).
• Double-check the default IP address (192.168.254.254) في متصفحك.
• حاول مسح ذاكرة التخزين المؤقت للمتصفح الخاص بك أو استخدام متصفح آخر.
• If you have changed the device's IP address and forgotten it, perform a factory reset (see 6.5 Factory Reset).

6.3 لا يوجد اتصال بالإنترنت

• In Repeater or Bridge mode, ensure the VAP11AC is successfully connected to your main router's WiFi network and the password is correct.
• In Router mode, verify your WAN settings are correctly configured for your internet service provider.
• Check the status of your main router or modem.

6.4 مخاوف ارتفاع درجة الحرارة

While the VAP11AC has a smart cooling fan, some users have reported the device becoming warm during extended use. Ensure the device is placed in an area with adequate airflow and that the fan vents are not obstructed. If overheating persists, consider adjusting the fan settings in the web interface or contacting support.

6.5 إعادة ضبط المصنع

To restore the device to its factory default settings:

1. With the device powered on, locate the Reset button (usually a small pinhole).
2. استخدم مشبك ورق أو أداة مدببة مماثلة للضغط مع الاستمرار على زر إعادة الضبط لمدة تتراوح بين 5 و 10 ثوانٍ تقريبًا.
3. Release the button when the device's lights flash or it reboots.
4. سيعاد تشغيل الجهاز بإعدادات المصنع الافتراضية. ستحتاج إلى إعادة تهيئته.

7. المواصفات

Figure 7.1: VAP11AC product specification overview.

8. الضمان والدعم

For warranty information and technical support, please refer to the official VONETS webالموقع أو تواصل مع بائع التجزئة. احتفظ بإيصال الشراء لطلبات الضمان.

Official VONETS Webموقع: www.vonets.com (Note: This is a placeholder link, please verify the actual support webموقع.)