Keyless2Go Replacement Flip Key Fob User Manual

1. المقدمة

This manual provides essential instructions for the proper use, programming, and maintenance of your Keyless2Go replacement flip key fob. Please read this manual thoroughly before attempting to use or program your new key fob to ensure correct functionality and vehicle compatibility.

2. انتهى المنتجview

The Keyless2Go replacement flip key fob is designed to function as a direct replacement for your original Hyundai Santa Fe keyless entry remote. It features a durable casing, integrated flip key blade, and four control buttons for vehicle functions.

Figure 1: Keyless2Go flip key fob with the key blade extended, showing the lock, unlock, trunk, and panic buttons.

Figure 2: Keyless2Go flip key fob with the key blade retracted, highlighting the button layout.

The fob includes the following buttons:

• زر القفل: Secures all vehicle doors.
• فتح زر: Unlocks all vehicle doors.
• Trunk/Hatch Button: Opens the vehicle's trunk or rear hatch.
• Panic Button (HOLD): Activates the vehicle's alarm system.

3. التوافق

This Keyless2Go replacement flip key fob is compatible with select Hyundai Santa Fe vehicles without push-button proximity ignition. Please verify your vehicle's year and model against the list below:

• هيونداي سانتا في 2013
• هيونداي سانتا في 2014
• هيونداي سانتا في 2015
• هيونداي سانتا في 2016

This product is designed to replace key fobs with FCC ID: TQ8-RKE-3F04 and Part Number: 95430-4Z100.

4. الإعداد والبرمجة

Important: This remote key fob replacement requires professional cutting and programming.

To ensure proper functionality and security, the key blade must be cut to match your vehicle's ignition, and the remote functions must be programmed to your vehicle's system. This process cannot be performed by the end-user and requires specialized equipment.

1. Contact a Qualified Locksmith or Dealership: Schedule an appointment with a professional automotive locksmith or a Hyundai dealership. They possess the necessary tools and expertise to cut the key blade and program the remote functions to your vehicle.
2. Provide Vehicle Information: Be prepared to provide your vehicle's year, make, model, and Vehicle Identification Number (VIN) to the technician.
3. Key Cutting: The technician will cut the blank key blade on your new fob to match your existing vehicle key.
4. البرمجة عن بعد: The technician will use diagnostic equipment to program the key fob's remote functions (lock, unlock, trunk, panic) to your vehicle's onboard computer system.

Keyless2Go offers free technical support to assist with any questions regarding your purchase or the programming process. Please contact us if you encounter any issues.

5. تعليمات التشغيل

Once your Keyless2Go flip key fob has been professionally cut and programmed, you can use it to operate your vehicle's keyless entry and ignition system.

• إغلاق الأبواب: اضغط على قفل button once to secure all vehicle doors. The vehicle's lights may flash, and a horn chirp may sound to confirm locking.
• فتح الأبواب: اضغط على فتح button once to unlock the driver's door, or twice within a few seconds to unlock all doors. The vehicle's lights may flash to confirm unlocking.
• Opening Trunk/Hatch: اضغط مع الاستمرار على Trunk/Hatch button for approximately 1-2 seconds to open the vehicle's trunk or rear hatch.
• Activating Panic Alarm: في حالة الطوارئ، اضغط مع الاستمرار على Panic (HOLD) button for approximately 2-3 seconds to activate the vehicle's alarm system. Press any button on the fob to deactivate the alarm.
• بدء تشغيل السيارة: Insert the cut key blade into the ignition and turn it to start the engine.

6. الصيانة

Your Keyless2Go flip key fob is designed for durability. Each unit comes complete with pre-installed batteries. When the battery eventually depletes, you may notice a decrease in remote range or intermittent functionality. To replace the battery:

1. Carefully separate the two halves of the key fob casing using a small flat-head screwdriver or a prying tool.
2. لاحظ اتجاه البطارية الموجودة.
3. Remove the old battery and insert a new, compatible battery (typically a coin cell battery, e.g., CR2032) with the positive (+) side facing up.
4. Carefully snap the two halves of the key fob casing back together until securely closed.

After battery replacement, the key fob should function without re-programming. If issues persist, refer to the Troubleshooting section.

7. استكشاف الأخطاء وإصلاحها

If you experience issues with your Keyless2Go flip key fob, consider the following:

• فوب لا يستجيب: Check the battery. If the battery is low or depleted, replace it as described in the Maintenance section.
• نطاق مخفض: A weak battery can cause reduced operating range. Replace the battery. Environmental interference can also affect range.
• وظيفة متقطعة: This could indicate a low battery or a need for re-programming. If a new battery does not resolve the issue, contact a professional locksmith or dealership for re-programming.
• Key Blade Not Turning Ignition: Ensure the key blade was cut correctly by a professional. If it was, there might be an issue with the ignition cylinder itself.

For persistent issues, please contact Keyless2Go customer support or consult a qualified automotive locksmith or dealership.

8. المواصفات

9. الدعم

Keyless2Go is committed to providing quality products and support. If you have any questions, require assistance with programming, or encounter any issues with your replacement key fob, please contact Keyless2Go customer support. Free technical support is included with every purchase.