LEDVANCE 360DEG Wall Sensor Instruction Manual

1. المقدمة

Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.

2. معلومات السلامة

يرجى قراءة تعليمات السلامة هذه بعناية قبل التركيب والتشغيل. قد يؤدي عدم اتباع هذه التعليمات إلى حدوث صدمة كهربائية أو حريق أو مخاطر أخرى.

• التثبيت الاحترافي: Installation must be carried out by a qualified electrician in accordance with all local and national electrical codes.
• انقطاع التيار الكهربائي: افصل الطاقة دائمًا من قاطع الدائرة قبل تركيب الجهاز أو صيانته أو تنظيفه.
• المجلدtage: ضمان حجم العرضtage matches the device's requirements (230 Volt AC).
• الظروف البيئية: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
• تعديل: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.

3. محتويات العبوة

تأكد من وجود كافة المكونات قبل البدء في التثبيت:

• 1x LEDVANCE 360DEG Wall Sensor device

4. مواصفات المنتج

• Stand-alone motion and light sensor for wall mounting.
• 360° detection field for comprehensive coverage.
• Optimized for energy saving.
• Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
• Zero-crossing circuit optimized for the operation of LED luminaires.
• IP55 protection type, suitable for outdoor use.
• Designed to be disassembled for separate control of internal light sources (if applicable).

5. الإعداد والتثبيت

The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

الشكل 5.1: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

الشكل 5.2: عن قرب view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.

5.1 موقع التركيب

• Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
• Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
• Ensure the mounting surface is stable and can support the device's weight (250 grams).

5.2 التوصيل الكهربائي

• تحذير: افصل الطاقة قبل عمل أي توصيلات كهربائية.
• Connect the sensor to a 230 Volt AC power supply.
• Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
• The zero-crossing circuit is optimized for LED luminaires.

6. تعليمات التشغيل

The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.

أوضاع التشغيل 6.1

The sensor features three selectable operating modes:

1. Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
2. Activation by Motion: The connected light turns on when motion is detected within the 360° field.
3. Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.

Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.

6.2 إعدادات الكشف

The sensor allows for adjustment of the light duration after detection:

• مدة الضوء: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.

7. الصيانة

The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.

• تنظيف: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
• تقتيش: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.

8. استكشاف الأخطاء وإصلاحها

If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:

• الضوء لا يعمل:
  • تأكد من أن مصدر الطاقة متصل ونشط.
  • Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
  • تأكد من خلو منطقة الكشف من العوائق.
  • Adjust the sensitivity settings if available.
• يبقى الضوء مضاءً بشكل مستمر:
  • Check if the operating mode is set to 'Continuous Light On'.
  • Ensure no constant motion is occurring within the detection zone.
• Light turns on unexpectedly:
  • Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
  • Adjust the sensor's sensitivity or detection range if possible.

إذا استمرت المشكلة بعد تجربة هذه الحلول، فاتصل بدعم العملاء أو بفني كهربائي مؤهل.

9. المواصفات

10. الضمان والدعم

The LEDVANCE 360DEG Wall Sensor comes with a ضمان الشركة المصنعة لمدة عامين من تاريخ الشراء، بما في ذلك تغطية عيوب المواد والصناعة في ظل الاستخدام العادي.

For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the LEDVANCE Brand Store.

يرجى الاحتفاظ بإثبات الشراء لأغراض الضمان.