مقدمة
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt. Please read these instructions carefully before installation and use to ensure proper function and longevity of your lockset.
معلومات السلامة
- احرص دائمًا على ارتداء معدات السلامة المناسبة، مثل القفازات وواقيات العين، أثناء التركيب.
- تأكد من تثبيت جميع المكونات بشكل آمن قبل الاستخدام.
- Do not use excessive force when operating the lockset.
- Keep keys in a safe and accessible location, separate from the door.
محتويات الحزمة
يجب أن تحتوي الحزمة الخاصة بك على العناصر التالية:
- 2 x Keyed Entry Ball Knobs
- 2 x Single Cylinder Deadbolts
- 4 x KW1 Keys
- Adjustable Latches (for both knob and deadbolt)
- لوحات الإضراب
- مسامير التثبيت
- قالب التثبيت (إذا كان متضمنًا)
Image: All components of the Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt set, including two knobs and two deadbolts with their respective latches and strike plates.
الإعداد والتثبيت
الأدوات المطلوبة:
- فيليبس رئيس مفك
- شريط قياس
- قلم رصاص
- قم بالحفر (إذا لزم الأمر تجهيز الباب الجديد)
- Wood Chisel (if new door preparation is needed)
خطوات التثبيت:
- جهز الباب: Ensure your door has the correct bore holes (typically 2-1/8 inches for the lock body and 1 inch for the latch) and backset (2-3/8 inches or 2-3/4 inches). Use the provided template if drilling new holes.
- تثبيت المزلاج: Insert the latch into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with two small screws. Adjust the backset if necessary by twisting the latch mechanism.
- Install the Exterior Knob/Deadbolt: Place the exterior portion of the knob/deadbolt through the large bore hole, ensuring the spindle or tailpiece aligns with the latch mechanism.
- Install the Interior Knob/Deadbolt: Position the interior portion of the knob/deadbolt, aligning it with the exterior portion and the latch. Secure with the long mounting screws provided, tightening evenly.
- تثبيت لوحة الضربة: Mark the position of the latch bolt on the door frame. Chisel out a shallow recess for the strike plate and secure it with screws. Ensure the latch bolt engages smoothly.
- عملية الاختبار: Close the door and test the knob and deadbolt with the key from both inside and outside to ensure smooth operation.
تعليمات التشغيل
Keyed Entry Knob:
- للقفل من الخارج: Insert the key and turn it to lock the knob. Remove the key.
- لفتح القفل من الخارج: Insert the key and turn it to unlock the knob.
- للقفل من الداخل: Press or turn the button/thumbturn on the interior knob.
- لفتح القفل من الداخل: Turn the interior knob or button/thumbturn.
Single Cylinder Deadbolt:
- للقفل من الخارج: Insert the key and turn it to extend the deadbolt. Remove the key.
- لفتح القفل من الخارج: Insert the key and turn it to retract the deadbolt.
- للقفل من الداخل: Turn the thumbturn on the interior side to extend the deadbolt.
- لفتح القفل من الداخل: Turn the thumbturn on the interior side to retract the deadbolt.
صيانة
- تنظيف: نظف مجموعة القفل بانتظام بقطعة قماش ناعمة.amp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the satin stainless steel finish.
- تشحيم: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants as they can attract dirt.
- إحكام المسمار: Check and tighten all mounting screws periodically to ensure the lockset remains securely attached to the door.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| المفتاح لا يدور أو أنه صلب. | Dirt in keyway, worn key, or misaligned cylinder. | Clean keyway with graphite lubricant. Try a spare key. Check for proper cylinder alignment. |
| Latch bolt does not retract/extend fully. | Misaligned latch, bent components, or debris. | Check latch alignment and screw tightness. Clear any obstructions. Lubricate the latch mechanism. |
| Door does not close properly with lock engaged. | Misaligned strike plate or door frame issues. | اضبط موضع لوحة القفل. افحص إطار الباب بحثًا عن أي اعوجاج أو تلف. |
| Knob/Deadbolt feels loose. | مسامير تثبيت فضفاضة. | Tighten the mounting screws evenly. Do not overtighten. |
تحديد
- نوع المنتج: Keyed Entry Knob and Single Cylinder Deadbolt
- نموذج: B36L1BD
- مادة: الفولاذ المقاوم للصدأ ، المعادن
- ينهي: ستان ستانليس ستيل
- درجة: 3 Grade (Residential)
- تسليم الباب: اليد اليمنى
- مسافة خلفية قابلة للتعديل: 2-3/8 بوصة (60 مم) أو 2-3/4 بوصة (70 مم)
- نطاق سمك الباب: 1-3/8 inches (35mm) to 1-3/4 inches (44mm)
- المفتاح: كيه دبليو 1
- Keys Included: 4
- أبعاد المنتج: حوالي 3.3 × 12.4 × 9.8 بوصة (8.4 × 31.5 × 24.9 سم)
- الاستخدام الداخلي/الخارجي: في الهواء الطلق
الضمان والدعم
For warranty information, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Specific warranty terms may vary.
For technical support or further assistance, please contact the customer service department of your retailer or the manufacturer, Overstock.
