مقدمة
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ikea KALLROR 503.570.02 Stainless Steel Cabinet Handles. Please read these instructions carefully before proceeding with installation to ensure proper and safe use.
المنتج انتهىview
The Ikea KALLROR 503.570.02 handles are designed to offer a modern aesthetic and functional grip for your kitchen cabinets or drawers. This set includes two handles and all necessary screws for a complete installation.
This image displays two sleek, cylindrical stainless steel cabinet handles, along with four silver screws. The handles have a brushed finish, and each handle is shown with two mounting posts. The screws are designed to secure the handles to cabinet doors or drawers.
تحديد
| رقم الموديل | 503.570.02 |
| ماركة | ايكيا |
| Quantity per set | 2 مقابض |
| طول المقبض | 213 ملم |
| التعامل مع العمق | 38 ملم |
| Hole Spacing (center-to-center) | 160 ملم |
| Drilled Hole Diameter | 5 ملم |
| سمك الباب المناسب | 16 ملم إلى 21 ملم |
| Handle/End Cap Material | الفولاذ المقاوم للصدأ |
| Plastic Parts Material | Polyethylene Plastic |
| المكونات المضمنة | أدوات التركيب (البراغي) |
| وزن | 170 جرام |
الإعداد والتثبيت
Installing your Ikea KALLROR cabinet handles is a straightforward process. Follow these steps carefully for a secure attachment.
الأدوات المطلوبة
- حفر
- Drill bit (5 mm diameter)
- شريط قياس أو مسطرة
- قلم رصاص
- مفك براغي (يوصى باستخدام رأس فيليبس)
خطوات التثبيت
- القياس والعلامة: Carefully measure and mark the desired position for the handle on your cabinet door or drawer front. Ensure the marks for the two screw holes are precisely 160 mm apart (center-to-center).
- ثقوب الحفر: Using a 5 mm drill bit, carefully drill through the cabinet door or drawer front at the marked positions. Ensure the holes are straight and clean.
- إرفاق المقبض: Align the handle with the drilled holes. Insert the provided screws from the inside of the cabinet door or drawer through the drilled holes and into the handle posts.
- مقبض آمن: Tighten the screws firmly with a screwdriver until the handle is securely attached. لا تفرط في الشد, as this may damage the cabinet material.
- يكرر: Repeat the process for the second handle if installing a set.
Important: These handles are suitable for door thicknesses between 16 mm and 21 mm. Verify your cabinet door thickness before drilling.
عملية
The Ikea KALLROR cabinet handles are designed for simple and reliable operation. Grasp the handle firmly to open or close cabinet doors and drawers as needed.
صيانة
To ensure the longevity and appearance of your stainless steel handles, follow these maintenance guidelines:
- تنظيف: Wipe regularly with a soft, damp cloth. For stubborn marks, use a mild detergent solution. Avoid abrasive cleaners, scouring pads, or chemical solvents, as these can damage the stainless steel finish.
- تجفيف: Always dry the handles thoroughly after cleaning to prevent water spots and maintain their luster.
- تقتيش: Periodically check the screws for tightness. If a handle feels loose, gently tighten the screws with a screwdriver.
استكشاف الأخطاء وإصلاحها
المقبض مرتخي
If the handle feels loose, gently tighten the screws from the inside of the cabinet door or drawer. Ensure not to overtighten.
صعوبة التثبيت
Ensure the drilled holes are precisely 160 mm apart (center-to-center) and that the drill bit used was 5 mm in diameter. Verify your cabinet door thickness is within the specified 16-21 mm range.
يدعم
For further assistance or inquiries regarding your Ikea KALLROR cabinet handles, please refer to the official Ikea website or contact Ikea customer service directly.
