1. المقدمة
Thank you for choosing the PowerWalker VI 3000 SCL FR Uninterruptible Power Supply (UPS). This device is designed to provide reliable power protection for your electronic equipment against power outages, surges, and spikes. It ensures continuous operation and safeguards your valuable data and hardware.
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your UPS. Please read it thoroughly before using the product and keep it for future reference.
Figure 1.1: PowerWalker VI 3000 SCL FR UPS
This image shows the PowerWalker VI 3000 SCL FR UPS from an angled front perspective, highlighting its compact black casing and the front display panel.
2. تعليمات السلامة
Please observe the following safety precautions to ensure safe operation and to prevent damage to the UPS or connected equipment.
- السلامة الكهربائية: لا تفتح جهاز UPSasing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel. Ensure the UPS is connected to a grounded power outlet.
- الموقع: Place the UPS in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Do not block ventilation openings.
- سلامة البطارية: The UPS contains internal batteries. Do not dispose of batteries in a fire, as they may explode. Do not open or mutilate batteries. Electrolyte is harmful to the skin and eyes.
- التحميل الزائد: Do not overload the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's rated capacity (1800W).
3. محتويات العبوة
Carefully unpack the UPS and check the contents of the package. You should find the following items:
- PowerWalker VI 3000 SCL FR UPS Unit
- دليل المستخدم (هذا المستند)
- USB Cable (for HID driver communication)
- سلك (أسلاك) الطاقة
في حالة فقدان أي من العناصر أو تلفها ، يرجى الاتصال بالموزع على الفور.
4. انتهى المنتجview
4.1 اللوحة الأمامية
Figure 4.1: Front Panel of the UPS
This image displays the front panel of the PowerWalker VI 3000 SCL FR UPS, showing the LCD display and the power button.
- شاشة LCD: Shows real-time status information such as input/output voltage, battery level, load capacity, and various operational modes.
- زر الطاقة: Used to turn the UPS ON or OFF.
4.2 اللوحة الخلفية
Figure 4.2: Rear Panel of the UPS
This image illustrates the rear panel of the PowerWalker VI 3000 SCL FR UPS, detailing the various input/output ports and sockets.
- COM.PORT (RS-232): Serial communication port for monitoring software.
- منفذ USB: USB communication port for monitoring software and HID driver functionality.
- Output Sockets (French Type): Connect your critical equipment here. These outlets provide battery backup and surge protection.
- سلك طاقة الإدخال: يقوم بتوصيل جهاز UPS بمأخذ الطاقة الكهربائية.
- RJ11/RJ45 Protection (IN/OUT): Provides surge protection for telephone/network lines.
- زر إعادة الضبط: Used to reset the UPS in certain error conditions.
5. الإعداد
5.1 التنسيب
Choose a suitable location for your UPS:
- Place the UPS on a flat, stable surface.
- Ensure adequate airflow around the unit. Maintain at least 10 cm (4 inches) clearance from walls or other obstructions.
- Avoid areas with excessive dust, humidity, or extreme temperatures.
5.2 التوصيل بالطاقة
- Connect the UPS input power cord to a grounded wall outlet.
- Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery runtime. The UPS will charge whether it is turned ON or OFF.
5.3 توصيل المعدات
- Plug your computer, monitor, and other critical devices into the output sockets on the rear panel of the UPS.
- Do not connect laser printers or shredders to the UPS, as their high surge current during startup may overload the unit.
- For network/telephone line protection, connect your modem/router to the RJ11/RJ45 IN port and then connect the OUT port to your device.
6. التشغيل
6.1 Turning the UPS ON/OFF
- لتشغيل: Press and hold the power button on the front panel for approximately 3 seconds until you hear a beep and the LCD display illuminates.
- لإيقاف التشغيل: Press and hold the power button for approximately 3 seconds until you hear a beep and the LCD display turns off.
6.2 فهم شاشة LCD
The LCD display provides real-time status of the UPS. Key indicators include:
- حجم الإدخالtage: Displays the current utility power voltage.
- حجم الإخراجtage: يعرض المجلدtage supplied by the UPS to connected devices.
- مستوى البطارية: يشير إلى مستوى شحن البطارية المتبقي.
- قدرة التحميل: يظهر النسبة المئويةtage of the UPS's capacity being used by connected devices.
- وضع التشغيل: Indicates if the UPS is operating on utility power (AC mode) or battery power (Battery mode).
6.3 تثبيت البرنامج (اختياري)
For advanced monitoring and management features, you can install the PowerWalker monitoring software. This software allows you to:
- Monitor UPS status and power conditions.
- Perform scheduled shutdowns.
- Receive alerts for power events.
Connect the UPS to your computer using the provided USB cable. The UPS supports HID (Human Interface Device) driver, allowing basic functionality without additional software on compatible operating systems.
7. الصيانة
7.1 العناية بالبطارية
- To maintain optimal battery life, ensure the UPS is connected to a power outlet at all times to keep the batteries charged.
- Perform a battery calibration (if supported by software) or a full discharge/recharge cycle every 3-6 months to ensure accurate battery runtime readings.
- Batteries are consumable items and will degrade over time. Replace batteries when their runtime significantly decreases.
7.2 التنظيف
Clean the exterior of the UPS with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.
7.3 التخزين
If storing the UPS for an extended period, ensure the batteries are fully charged. Recharge the batteries every three months to prevent permanent damage due to self-discharge.
8. استكشاف الأخطاء وإصلاحها
If you encounter issues with your UPS, refer to the following table for common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| UPS does not turn ON | No utility power; Low battery; Power button not pressed long enough. | Check power cord connection; Allow UPS to charge for 8 hours; Press and hold power button for 3 seconds. |
| UPS beeps continuously in AC mode | حالة الزائد. | Disconnect non-essential equipment until the alarm stops. |
| يتحول جهاز UPS إلى وضع البطارية بشكل متكرر | Unstable utility power; High/low input voltage. | This is normal operation. If frequent, check utility power quality. |
| مدة تشغيل البطارية أقصر من المتوقع | Batteries not fully charged; Batteries reaching end of life; Overload. | Allow 8 hours for charging; Consider battery replacement; Reduce connected load. |
إذا استمرت المشكلة بعد تجربة الحلول المذكورة أعلاه، فيرجى الاتصال بدعم العملاء.
9. المواصفات
Technical specifications for the PowerWalker VI 3000 SCL FR UPS:
| ميزة | قيمة |
|---|---|
| رقم الموديل | 10121151 |
| سعة | 3000 فولت أمبير / 1800 واط |
| المجلدtage | 290 فولت |
| أبعاد المنتج | 39.7 × 14.6 × 20.5 سم |
| وزن العنصر | 11.5 كيلوغرام |
| لون | أسود |
| مادة | البولي كربونات (PC) |
| أول تاريخ متاح | 27. December 2019 |
10. الضمان والدعم
10.1 معلومات الضمان
PowerWalker products are manufactured to the highest quality standards. This UPS comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official PowerWalker webالموقع للحصول على شروط وأحكام الضمان التفصيلية.
10.2 دعم العملاء
For technical assistance, troubleshooting, or warranty claims, please contact PowerWalker customer support. You can typically find contact information on the PowerWalker official webالموقع أو من خلال الموزع المحلي الخاص بك.
عند الاتصال بالدعم، يرجى تجهيز رقم طراز المنتج (10121151) والرقم التسلسلي.
