1. المقدمة
This manual provides essential information for the safe and efficient operation of your Nilox SAI Premium Line Interactive Sinewave 3000VA Uninterruptible Power Supply (UPS). This device is designed to protect small networks, workstations, computers, and peripherals from power outages and electrical disturbances, ensuring the longevity of connected devices and data integrity.
The UPS features a perfect sine wave output in backup mode, an Automatic Voltage Regulator (AVR) for intelligent voltage management, and an LCD display for real-time monitoring of operational parameters. Please read this manual thoroughly before installation and use.
2. تعليمات السلامة
يرجى مراعاة احتياطات السلامة التالية لمنع الإصابة وتلف جهاز UPS أو المعدات المتصلة به:
- لا تفتح جهاز UPSasinز. لا توجد قطع غيار قابلة للصيانة من قِبل المستخدم. يُرجى إحالة جميع أعمال الصيانة إلى فنيي صيانة مؤهلين.
- لا تقم بتركيب جهاز UPS في ضوء الشمس المباشر، أو بالقرب من مصادر الحرارة، أو في بيئات بها غبار أو رطوبة زائدة، أو مواد أكالة.
- Ensure the UPS is connected to a grounded AC power outlet.
- Do not connect non-computer related equipment such as medical equipment, life support equipment, or household appliances to the UPS.
- تأكد من وجود تهوية كافية حول جهاز UPS. لا تسد فتحات التهوية.
- In case of fire, use a dry chemical fire extinguisher. Do not use water.
- Disconnect the UPS from the AC power outlet before cleaning or performing any maintenance.
3. محتويات العبوة
Carefully unpack the UPS and check the contents. The package should contain:
- Nilox SAI Premium L.I Sinewave 3000VA UPS Unit
- دليل المستخدم (هذا المستند)
- Power cables (may vary by region, typically includes input power cable and output cables)
- USB communication cable (for software monitoring)
في حالة فقدان أي من العناصر أو تلفها ، يرجى الاتصال بالموزع على الفور.
4. انتهى المنتجview
4.1 اللوحة الأمامية
The front panel features the LCD display and the power button. The LCD provides real-time status updates, including input/output voltage, battery level, load percentage, and operational mode. The power button is used to turn the UPS on and off.
4.2 اللوحة الخلفية
The rear panel includes the AC input, multiple output sockets (IEC C13), a USB communication port, and ventilation fan. There are 6 output sockets in total, providing power to connected devices. The USB port allows connection to a computer for monitoring and management via the Viewبرامج الطاقة.
4.3 شاشة LCD
The LCD display provides comprehensive information about the UPS status:
- حجم الإدخالtage: يعرض مستوى صوت التيار المتردد الواردtage.
- حجم الإخراجtage: يعرض المجلدtagيتم توفيرها للأجهزة المتصلة.
- مستوى البطارية: Indicates the current charge level of the internal batteries.
- تحميل بيرسنtage: يظهر النسبة المئويةtagيتم استخدام جزء من سعة وحدة UPS حاليًا بواسطة الأجهزة المتصلة.
- وضع التيار المتردد: يشير هذا إلى أن جهاز UPS يعمل على طاقة الشبكة الكهربائية.
- وضع البطارية: Indicates the UPS is operating on battery power (during a power outagهـ).
- التحميل الزائد: Warning indicator if the connected load exceeds the UPS capacity.
- خفاش منخفض: Warning indicator for low battery charge.
- عيب: General fault indicator.
5. الإعداد
- فكّ تغليف جهاز UPS: Remove the UPS from its packaging and inspect it for any shipping damage.
- الموقع: Place the UPS in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and excessive dust or moisture. Ensure there is sufficient space around the unit for proper airflow.
- الاتصال بالطاقة المترددة: Connect the UPS's input power cable to a grounded wall outlet. The UPS will begin charging its internal batteries. For optimal performance, allow the UPS to charge for at least 8 hours before connecting any devices.
- ربط الأجهزة: Plug your computer, monitor, and other critical peripherals into the output sockets on the rear panel of the UPS. Do not overload the UPS beyond its rated capacity (2100W).
- التشغيل الأولي: اضغط مع الاستمرار على زر الطاقة الموجود على اللوحة الأمامية لبضع ثوانٍ حتى يتم تشغيل جهاز UPS وتضيء شاشة LCD.
- تثبيت البرنامج (اختياري): For advanced monitoring and management, connect the UPS to your computer via the USB cable and install the ViewPower software. The software can be downloaded from the official Nilox webموقع.
6. تعليمات التشغيل
6.1 تشغيل/إيقاف التشغيل
- لتشغيل: Press and hold the power button on the front panel for approximately 3 seconds until you hear a beep and the LCD display turns on.
- لإيقاف التشغيل: Press and hold the power button for approximately 3 seconds until the LCD display turns off. Ensure all connected devices are safely shut down before powering off the UPS.
6.2 Understanding UPS Modes
- وضع التيار المتردد: The UPS is receiving utility power and providing conditioned power to connected devices. The batteries are being charged or maintained.
- وضع البطارية: أثناء انقطاع التيار الكهربائيtagأو حجم كبيرtage fluctuation, the UPS automatically switches to battery power to continue supplying power to connected devices. The LCD will indicate 'Batt. Mode' and an audible alarm may sound.
- AVR Mode: المجلد التلقائيtage Regulator (AVR) automatically corrects minor voltage fluctuations (sags or surges) without switching to battery power, thus preserving battery life.
6.3 ViewPower Software
ال ViewPower software allows you to monitor the UPS status, configure settings, and perform controlled shutdowns of connected systems. Connect the UPS to your computer via the USB port and download the software from the official Nilox website. Refer to the software's help documentation for detailed instructions.
7. الصيانة
7.1 استبدال البطارية
The Nilox SAI Premium 3000VA UPS uses two 9Ah sealed lead-acid batteries. The typical lifespan of UPS batteries is 3-5 years, depending on usage and environmental conditions. When batteries need replacement, the UPS may indicate a 'Low Batt' or 'Fault' condition more frequently, or the backup time may significantly decrease.
Replacement Battery Code: 17NXBA9A00001 - 17NXBA9A00001T.
حذر: Battery replacement should only be performed by qualified service personnel. Batteries can pose a risk of electrical shock and burns from high short-circuit current. Always disconnect the UPS from the AC power and turn it off before attempting any battery maintenance. Dispose of old batteries properly according to local regulations.
7.2 التنظيف
To clean the exterior of the UPS, use a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure the UPS is disconnected from the AC power outlet before cleaning. Keep ventilation openings clear of dust and debris to ensure proper cooling.
8. استكشاف الأخطاء وإصلاحها
This section addresses common issues you might encounter with your UPS. If the problem persists after following these steps, please contact Nilox support.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يعمل جهاز UPS | No AC input power; Low battery; UPS fault | Check AC power connection; Allow UPS to charge for 8 hours; Contact support if fault persists. |
| No power output to devices | UPS in fault mode; Overload; Output circuit breaker tripped | Check LCD for fault indicators; Reduce connected load; Reset output circuit breaker if present. |
| يصدر جهاز UPS صوت تنبيه مستمر أو متكرر | Operating on battery; Low battery; Overload; UPS fault | This is normal during power outages; Allow battery to charge; Reduce connected load; Check LCD for fault. |
| LCD shows 'Overload' | Connected load exceeds UPS capacity | Immediately disconnect non-essential devices to reduce the load. |
| Short backup time | Batteries not fully charged; Batteries nearing end of life; Excessive load | Allow UPS to charge for 8 hours; Consider battery replacement; Reduce connected load. |
9. المواصفات الفنية
| ميزة | مواصفة |
|---|---|
| نموذج | NXGCLISW3K2X9V2 |
| سعة | 3000 فولت أمبير / 2100 واط |
| حجم الإدخالtage | 230 فولت |
| حجم الإخراجtage | 237 Volts (AC Mode) |
| الموجي (وضع البطارية) | موجة جيبية نقية |
| نوع البطارية | حمض الرصاص المختوم |
| Battery Quantity & Ampإيراج | 2 × 9 أمبير |
| شحن وقت | Approximately 8 hours to 90% capacity |
| مآخذ الإخراج | 6 × IEC C13 |
| منفذ الاتصالات | USB |
| الأبعاد (الطول × العرض × الارتفاع) | 49 × 29 × 23 سم |
| وزن | 13.3 كجم |
| مادة | معدن |
| عامل الشكل | برج |
10. الضمان والدعم
The Nilox SAI Premium L.I Sinewave 3000VA UPS comes with a ضمان لمدة 3 سنوات on electronic parts. This warranty includes a convenient pickup and return service, ensuring that any necessary repairs or replacements are handled efficiently without additional cost for collection or delivery of the product.
For technical support, warranty claims, or further assistance, please visit the official Nilox website or contact your local Nilox service center. Ensure you have your product model number (NXGCLISW3K2X9V2) and proof of purchase available when contacting support.
