Okin 2 Button 5 Pin Recliner Hand Control with USB - Instruction Manual

مقدمة

This manual provides instructions for the installation, operation, and maintenance of your Okin 2 Button 5 Pin Lift Chair or Power Recliner Hand Control with USB.

This control unit is designed for use with compatible lift chairs and power recliners, offering convenient control over reclining functions and a built-in USB charging port.

مميزات المنتج

• مادة: Zinc alloy pane for durability.
• الشحن عبر USB: 5V 2A output for mobile devices.
• طول الكابل: Approximately 125cm (4.1Ft) recliner switch cable.
• التوافق: Works with Okin, Ashley Furniture, Dewert, Flexteel, Limoss, and many other power recliners using a 5-pin connection.

Okin 2 Button 5 Pin Recliner Hand Control with USB, showing the two control buttons and the USB charging port.

الإعداد والتثبيت

This section details the steps for replacing or installing the hand control unit.

الأدوات المطلوبة: Small flat-head screwdriver or putty knife (for prying), zip ties (optional, for cable management).

خطوات التثبيت:

1. فصل الطاقة: Ensure the recliner is unplugged from the electrical outlet before beginning installation.
2. إزالة عنصر التحكم القديم: Carefully remove the existing hand control unit from its mounting location. This may involve gently prying it out of the armrest or side panel.
3. افصل الكابل: Disconnect the 5-pin connector of the old control from the recliner's motor or control box.
4. توصيل عنصر تحكم جديد: Connect the new Okin 2 Button 5 Pin Hand Control's cable to the recliner's control box. Ensure the 5-pin connector is securely seated.
5. مسار الكابل: Route the cable neatly and secure it with zip ties if necessary to prevent snagging or damage.
6. Install Unit: Insert the new hand control unit into the mounting hole. Ensure it clicks into place or is securely fastened using the provided circlips.
7. إعادة توصيل الطاقة: Reconnect the recliner to the electrical outlet.

انفجرت view diagram illustrating the components of the recliner hand control and its installation into a wooden frame, showing the switch cover, lower cover, circlips, and studs.

Close-up of the 5-pin connector, which connects the hand control to the recliner's motor system.

تعليمات التشغيل

The Okin 2 Button 5 Pin Hand Control provides simple operation for your power recliner.

وظيفة الاستلقاء:

• Extend Footrest / Recline: اضغط مع الاستمرار على "UP" button to extend the footrest and recline the chair.
• Retract Footrest / Upright: اضغط مع الاستمرار على "DOWN" button to retract the footrest and return the chair to its upright position.
• ملحوظة: Some recliner models may require continuous pressure on the button for the full range of motion.

منفذ شحن USB:

• The integrated USB port (5V 2A) is designed for charging mobile devices. Connect your device's USB cable to the port.
• تأكد من توصيل الكرسي القابل للإمالة بمصدر طاقة لكي يعمل منفذ USB.

صيانة

To ensure the longevity and proper function of your hand control unit:

• تنظيف: Keep the unit clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents, which can damage the surface or internal components.
• فحص الكابلات: Ensure cables are not pinched, twisted, or damaged. Regularly inspect the cable for any signs of wear, fraying, or cuts.
• الظروف البيئية: Do not expose the unit to excessive moisture, direct sunlight, or extreme temperatures.

استكشاف الأخطاء وإصلاحها

وحدة التحكم لا تستجيب:

1. فحص الطاقة: Verify that the recliner is properly plugged into a working power outlet.
2. فحص الاتصال: Ensure that all cable connections, especially the 5-pin connector to the recliner's motor, are secure and fully inserted.
3. تلف الكابل: Inspect the control cable for any visible damage or cuts. A damaged cable may prevent proper function.
4. Motor/Power Supply: If the issue persists after checking connections and cable, the recliner's motor or power supply unit may need inspection by a qualified technician.

منفذ USB لا يشحن:

1. Recliner Power: Ensure the recliner is powered on and connected to an electrical outlet. The USB port requires power from the recliner's system.
2. Cable/Device Check: جرب كابل USB أو جهازًا مختلفًا لاستبعاد وجود مشاكل في كابل الشحن أو الجهاز الذي يتم شحنه.
3. استبدال الوحدة: If the USB port still does not function, the control unit may require replacement.

تحديد

Detailed dimensions of the Okin 2 Button 5 Pin Recliner Hand Control, showing measurements of 3.27 inches, 1.42 inches, and 3.9 inches.

مؤخرة view of the control unit, displaying product identification labels including P/N JLDK-17, DC 24V 2A, USB 5V 2A, and manufacturer Okin Refined Electric Technology Co., Ltd.

الضمان والدعم

For warranty information or technical support regarding this Okin 2 Button 5 Pin Recliner Hand Control, please refer to the documentation provided with your original recliner or contact the manufacturer directly. Specific warranty terms for this replacement part may vary.