دليل مستخدم محطة الطقس وساعة المنبه الرقمية التي تعمل بالتحكم اللاسلكي من تريفي 0ME3P08

1. المقدمة

Thank you for choosing the Trevi 0ME3P08 Digital Radio Controlled Weather Station. This device provides accurate timekeeping, indoor and outdoor temperature and humidity readings, and a weather forecast indication. It also functions as an alarm clock. Please read this manual carefully to ensure proper setup and operation.

الصورة 1: الجبهة view of the Trevi 0ME3P08 Digital Radio Controlled Weather Station, displaying time, date, indoor/outdoor temperature, humidity, and weather forecast icons.

2. محتويات العبوة

• Trevi 0ME3P08 Main Unit
• External Wireless Sensor
• دليل المستخدم (هذا المستند)

3. الإعداد

3.1 تركيب البطارية

1. الوحدة الرئيسية: Open the battery compartment cover on the back of the main unit. Insert 2 AAA batteries (not included), ensuring correct polarity (+/-). Close the cover.
2. الاستشعار الخارجي: Open the battery compartment cover on the back of the external sensor. Insert 2 AAA batteries (not included), ensuring correct polarity (+/-). Close the cover.

ملحوظة: It is recommended to insert batteries into the external sensor first, then into the main unit, to facilitate immediate pairing.

3.2 وضع المستشعر

Place the external sensor in a sheltered outdoor location, away from direct sunlight and rain, to ensure accurate temperature and humidity readings. The maximum wireless range is typically up to 30 meters (100 feet) in open areas. Walls and other obstructions may reduce this range.

Image 2: The Trevi 0ME3P08 Weather Station main unit shown alongside its external wireless sensor, illustrating the two components of the system.

4. تعليمات التشغيل

4.1 Initial Synchronization (Radio Controlled Clock)

Upon battery installation, the weather station will automatically attempt to synchronize with the DCF (or similar) radio signal to set the time and date. This process may take several minutes or up to 24 hours depending on signal strength. Ensure the unit is placed away from electronic interference.

• A signal icon will typically flash during synchronization and become solid once successful.
• If synchronization fails, try repositioning the unit or manually setting the time (refer to the device's physical buttons for manual setting instructions, if available).

4.2 عرض أكثرview

The LED display shows the following information:

• وقت: تنسيق 12/24 ساعة.
• التاريخ واليوم: Calendar display.
• درجة الحرارة والرطوبة الداخلية: Current readings from the main unit.
• درجة الحرارة الخارجية: Current reading from the external sensor.
• النشرة الجوية: رموز تشير إلى أحوال الطقس المتوقعة (مثل: مشمس، غائم، ممطر).

4.3 وظيفة المنبه

The weather station includes an alarm clock function. Specific buttons for setting and activating the alarm are usually located on the back or top of the unit. Refer to the device's physical buttons and on-screen prompts for detailed alarm setting instructions.

4.4 Backlight LED Display

The unit features a backlight LED display for improved visibility in low light conditions. A dedicated button (often labeled "LIGHT" or "SNOOZE/LIGHT") typically activates the backlight temporarily or adjusts its brightness.

5. المميزات

• 12/24h Radio Controlled Clock for automatic time synchronization.
• Integrated Alarm Clock with snooze function.
• Calendar display.
• Internal digital thermometer and hygrometer for indoor conditions.
• External wireless sensor for outdoor temperature detection.
• Graphical weather forecast indication.
• Backlight LED Display for clear visibility.

6. المواصفات

7. الصيانة

• نظّف الجهاز بقطعة قماش ناعمة وجافة. لا تستخدم منظفات أو مذيبات كاشطة.
• Avoid exposing the main unit to direct sunlight, extreme temperatures, or moisture.
• إذا لم يتم استخدام الجهاز لفترة طويلة، فقم بإزالة البطاريات لمنع التسرب.
• Ensure the external sensor is kept clean and free from debris for accurate readings.

8. استكشاف الأخطاء وإصلاحها

• لا يوجد عرض / عرض خافت:
  • Check battery polarity and ensure batteries are fresh.
  • Replace all batteries in both the main unit and external sensor.
• External Sensor Not Connecting:
  • Ensure batteries are correctly installed in the external sensor.
  • Place the external sensor closer to the main unit.
  • Remove and reinsert batteries in both units to force a re-synchronization.
  • Avoid placing the sensor near large metal objects or sources of electromagnetic interference.
  • If the issue persists, the sensor might be faulty (refer to warranty information).
• Radio Controlled Clock Not Synchronizing:
  • Ensure the unit is placed in an open area, away from electronic devices that may cause interference.
  • Allow up to 24 hours for initial synchronization.
  • Try repositioning the unit, especially near a window.
  • Check if manual time setting is available as a temporary solution.
• قراءات غير دقيقة لدرجة الحرارة/الرطوبة:
  • Ensure the external sensor is not in direct sunlight or exposed to rain.
  • Verify there are no heat sources or vents near the internal sensor.

9. الضمان والدعم

This Trevi product comes with a ضمان الشركة المصنعة لمدة عامين. For warranty claims or technical support, please contact your retailer or the official Trevi customer service. Keep your proof of purchase for warranty validation.

لمزيد من المعلومات، يمكنك زيارة Trevi brand page.