مقدمة
This manual provides detailed instructions for the assembly, operation, and maintenance of your TecTake 403238 / 800747 Swivel Office Chair. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product. This ergonomic office chair is designed for comfort and support during extended periods of sitting, featuring a padded seat, backrest, and headrest, along with adjustable height and tilt functions.
Image: The TecTake 403238 / 800747 Swivel Office Chair, showcasing its black faux leather upholstery, padded armrests, and five-star base with casters.
تعليمات السلامة
لتجنب الإصابة أو تلف الكرسي، يرجى مراعاة إرشادات السلامة التالية:
- Ensure all components are securely fastened before use. Regularly check and tighten screws.
- لا تتجاوز الحد الأقصى لوزن الكرسي (راجع المواصفات).
- تجنب الوقوف على الكرسي أو استخدامه كمقعد.
- Keep hands and fingers clear of moving parts, especially during height and tilt adjustments.
- استخدم الكرسي على سطح مستوٍ لمنع انقلابه.
- احتفظ بمواد التغليف بعيدًا عن متناول الأطفال لتجنب مخاطر الاختناق.
- Do not expose the chair to direct sunlight or extreme temperatures, as this may damage the material.
قائمة المكونات
Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- مسند الظهر
- وسادة المقعد
- مساند الذراعين (اليسار واليمين)
- لوحة الآلية (أسفل المقعد)
- أسطوانة رفع الغاز
- غطاء رفع الغاز
- قاعدة خمس نجوم
- عجلات (5 قطع)
- الأجهزة (البراغي، الغسالات، مفتاح ألين)
تعليمات التجميع
Follow these steps to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
Step 1: Attach Casters to the Base
أدخل كل عجلة من العجلات الخمس في الفتحات الموجودة في نهاية كل ساق من قاعدة النجوم الخمس. ادفع بقوة حتى تستقر في مكانها.
الخطوة 2: إدخال رافعة الغاز
Place the gas lift cylinder into the central hole of the five-star base. Then, slide the gas lift cover over the gas lift cylinder.
Step 3: Attach Mechanism Plate to Seat
Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the adjustment lever faces the front of the seat. Secure it with the provided screws and tighten them using the Allen key.
Image: Close-up of the chair's adjustment lever, indicating its function for height and tilt control. This lever is part of the mechanism plate that attaches to the seat.
الخطوة الرابعة: تثبيت مساند الذراعين بالمقعد ومسند الظهر
Attach the armrests to the sides of the seat cushion using the designated screws. Do not fully tighten yet. Then, align the backrest with the armrests and secure it with screws. Once all screws are in place, tighten them evenly and securely.
الخطوة 5: توصيل مجموعة المقعد برافعة الغاز
Carefully place the assembled seat and backrest onto the gas lift cylinder. The tapered end of the gas lift will fit into the central hole of the mechanism plate. Press down firmly on the seat to ensure a secure connection.
الصورة: الجبهة view of the fully assembled TecTake office chair, highlighting the padded seat, backrest, and armrests.
Your TecTake office chair is now assembled. Before use, ensure all connections are tight and the chair is stable.
تعليمات التشغيل
Your TecTake office chair offers several adjustments to customize your seating experience:
ضبط الارتفاع
To adjust the seat height, locate the lever on the right side, beneath the seat.
- لرفع المقعد: ارفع الرافعة مع رفع وزنك عن المقعد. سيرتفع المقعد تلقائيًا. حرر الرافعة عند الوصول إلى الارتفاع المطلوب.
- لخفض المقعد: Lift the lever while remaining seated. The seat will lower. Release the lever at the desired height.
Tilt Function and Lock
The chair features a tilt mechanism allowing the backrest and seat to recline together.
- لتمكين الإمالة: Pull the same lever (used for height adjustment) outwards from the chair. The chair will now allow you to recline.
- لقفل الإمالة: Push the lever inwards towards the chair. The chair will lock in its upright position.
Image: An illustration demonstrating the range of height adjustment and the reclining tilt function of the office chair.
تعديل شد الإمالة
Beneath the seat, at the front, there is a round knob. This knob controls the tension of the tilt mechanism.
- To increase tension (harder to recline): لف المقبض في اتجاه عقارب الساعة.
- To decrease tension (easier to recline): أدر المقبض عكس اتجاه عقارب الساعة.
صيانة
ستساعد الصيانة المنتظمة على إطالة عمر ومظهر كرسي مكتبك.
- تنظيف: بالنسبة للتنجيد المصنوع من الجلد الصناعي، امسحه بقطعة قماش ناعمة.amp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the material.
- الإطار والقاعدة: Wipe metal and plastic parts with a damp قطعة قماش.
- عجلات: Periodically clean casters to remove hair, dust, and debris that may hinder smooth movement.
- الأجهزة: Every 3-6 months, check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability and safety.
- تجنب التحميل الزائد: Do not exceed the chair's stated weight capacity.
استكشاف الأخطاء وإصلاحها
إذا واجهت أي مشاكل مع كرسيك، راجع المشاكل والحلول الشائعة التالية:
- صرير الكرسي:
Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving metal parts, avoiding contact with plastic or upholstery.
- الكرسي لا يمكن تعديل ارتفاعه:
Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support.
- الكرسي غير مستقر/متذبذب:
Verify that all screws, especially those connecting the armrests to the seat and backrest, are securely tightened. Ensure the gas lift is properly seated in the base and mechanism plate.
- Casters Do Not Roll Smoothly:
Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels and axles. Ensure the casters are fully inserted into the base.
تحديد
| ماركة | TecTake |
| رقم الموديل | 800747 |
| لون | أسود |
| مادة | Polyurethane, Faux Leather, Pine Wood (frame) |
| وزن العنصر | 16.7 كيلوغرام |
| الاستخدام الموصى به | مكتب |
| ميزة خاصة | بناء متين |
الأبعاد (تقريبية)
Image: Technical drawing illustrating the approximate dimensions of the TecTake office chair in centimeters. Key measurements include seat width (55 cm), seat depth (52 cm), backrest width (48 cm), adjustable seat height (47-55 cm), and overall height (115-123 cm).
- Overall Height: 115-123 cm
- Seat Height (adjustable): 47-55 cm
- عرض المقعد: 55 سم
- عمق المقعد: 52 سم
- Backrest Width: 48 cm
- Armrest Height (from seat): 68.5-76.5 cm
- قطر القاعدة: 67 سم
الضمان والدعم
Specific warranty information for the TecTake 403238 / 800747 Swivel Office Chair is not provided in this document. For details regarding warranty coverage, spare parts availability, or technical support, please refer to the official TecTake website or contact their customer service directly. Information regarding spare parts availability was not provided in the product data.
يمكنك زيارة TecTake Brand Store on Amazon لمزيد من المعلومات.
