1. المقدمة
Thank you for choosing the TOOWELL Motion Sensor Ceiling Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light fixture. Please read this manual thoroughly before use to ensure safe and efficient operation. Keep this manual for future reference.
2. انتهى المنتجview
الميزات الرئيسية
- Upgrade Daylight/Night Mode: Slide the switch to turn photocell sensor on/off. Under Daylight mode, motion motivated light on all day long. Under Daylight/Night mode, the light only activates at night and turns off automatically after 20 seconds.
- Motion Sensored: Built-in PIR infrared motion detector with 120-degree detection angle. Instantly turns on when it detects motion from up to 20 feet away.
- سطوع: Super bright 400 Lumens with 80 pcs bright & long life-span SMD2835 LEDs. Provides wide coverage (300 sqft) with a frosted lamp cover to soften light.
- Energy Efficient Battery Powered: Requires 4 D-cell batteries (not included). Designed for efficiency, providing more than 6 months of light on one set of batteries.
- لاسلكي وسهل التركيب: No electricity required, quick installation in less than 5 minutes. Ideal for lighting up closets, pantries, stairways, sheds, porches, and storage rooms.
ماذا يوجد في الصندوق
- 1 x Battery powered ceiling light
- Mounting hardware (screws, anchors, fixing plug)
- لا يتم تضمين البطاريات.
صور المنتج
3. الإعداد والتثبيت
The TOOWELL Motion Sensor Ceiling Light is designed for quick and easy installation without the need for electrical wiring. Follow these steps:
- Prepare the Light: Gently twist the back plate of the light counter-clockwise to detach it from the main light unit.
- تركيب البطاريات: Insert 4 D-cell batteries (not included) into the battery compartment, ensuring correct polarity.
- Reattach Back Plate: Align the back plate with the light unit and twist clockwise to secure it.
- تركيب لوحة القاعدة: Choose a desired location on the ceiling or wall. Use the included screws and anchors to securely mount the base plate.
- قم بتركيب وحدة الإضاءة: Align the light unit with the mounted base plate and twist clockwise until it clicks into place.
- إزالة الفيلم الواقي: Kindly note that a blue protective film is stuck on the silver part of the light to keep it clean. You can tear this film off before use for optimal appearance.
4. تعليمات التشغيل
Your TOOWELL Motion Sensor Ceiling Light offers two operating modes:
- وضع ضوء النهار: Slide the switch on the light to the 'Daylight' (sun icon) position. In this mode, the motion sensor will activate the light whenever motion is detected, regardless of ambient light conditions (day or night). The light will turn off automatically after 20 seconds of no motion.
- Daylight/Night Mode: Slide the switch on the light to the 'Daylight/Night' (moon icon) position. In this mode, the motion sensor will only activate the light when motion is detected in low-light or dark conditions (at night). The light will turn off automatically after 20 seconds of no motion.
The built-in PIR infrared motion detector has a 120-degree detection angle and can detect motion from up to 20 feet away.
5. الصيانة
- استبدال البطارية: When the light begins to dim or fails to activate, it's time to replace the batteries. Follow the steps in the 'Setup and Installation' section to safely replace the 4 D-cell batteries.
- تنظيف: To clean the light fixture, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
- عمر الصمام: The integrated LED lights are designed for a long lifespan and do not require replacement.
6. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الضوء لا يعمل. | 1. Batteries are dead or incorrectly installed. 2. Light mode is set incorrectly for ambient light conditions. 3. لم يتم رصد أي حركة ضمن النطاق. | 1. Replace batteries and ensure correct polarity. 2. Check the Daylight/Night mode switch. If it's too bright for Night mode, switch to Daylight mode. 3. Ensure motion is within 20 feet and 120-degree detection angle. |
| الضوء يبقى مضاءً باستمرار. | 1. Continuous motion detected. 2. Light mode is set to 'Daylight' in a constantly bright area. | 1. Ensure no continuous motion is within the sensor's range. 2. If in a bright area, switch to 'Daylight/Night' mode so it only activates in darkness. |
| الضوء خافت. | البطاريات منخفضة. | Replace all 4 D-cell batteries. |
| مستشعر الحركة لا يستجيب. | 1. المستشعر مسدود أو متسخ. 2. ارتفاع التركيب غير الصحيح. | 1. Clean the sensor lens with a soft cloth. Ensure no objects are blocking the sensor. 2. Ensure installation height is within recommended range (3-5m / 9.8-16.4ft). |
7. المواصفات
| مواصفة | قيمة |
|---|---|
| ماركة | جيد جدا |
| نموذج | Update Daylight Motion Sensor Light |
| نوع مصدر الضوء | LED (SMD2835) |
| سطوع | 400 لومن |
| درجة حرارة اللون | 5000 كلفن |
| مصدر الطاقة | 4 D-cell Batteries (Not Included) |
| زاوية مستشعر الحركة | 120 درجة |
| نطاق كشف الحركة | حتى 20 قدم |
| مؤقت الإيقاف التلقائي | 20 seconds (after no motion) |
| أبعاد المنتج | 7.5"D x 1.8"H (7.5"L x 7.5"W x 1.8"H) |
| وزن العنصر | 14.4 أونصات |
| مادة | أكريلونيتريل بوتادين ستايرين (ABS) |
| نوع التثبيت | تدفق جبل |
| الاستخدام الداخلي والخارجي | للاستخدام الداخلي فقط |
8. الضمان والدعم
معلومات الضمان
Specific warranty details for the TOOWELL Motion Sensor Ceiling Light are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact the manufacturer directly.
دعم العملاء
If you encounter any issues or have questions not covered in this manual, please contact TOOWELL customer support. You can typically find contact information on the product packaging, the seller's page on the retail platform, or the official TOOWELL webموقع.
When contacting support, please have your product model number (Update Daylight Motion Sensor Light) and purchase details (e.g., order number, date of purchase) ready to assist with faster service.
