SABRENT 1TB Rocket NVMe PCIe 4.0 M.2 2280 Internal SSD Instruction Manual

1. المقدمة

The SABRENT 1TB Rocket NVMe PCIe 4.0 M.2 2280 Internal SSD (model SB-ROCKET-NVMe4-1TB) delivers advanced flash disk technology with a PCIe Gen4.0 x4 interface. Designed for extreme performance, this solid-state drive offers significant speed improvements for compatible systems. This manual provides essential information for setup, operation, and maintenance of your SSD.

Key features include NVMe M.2 PCIe Gen4 x4 Interface, compliance with NVMe 1.3, Power Management Support for APST / ASPM / L1.2, and support for SMART and TRIM commands. It also incorporates Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision for enhanced reliability.

Image: The SABRENT Rocket NVMe 4.0 SSD, highlighting its introduction as a next-generation data storage technology.

2. الإعداد والتثبيت

Proper installation is crucial for optimal performance. The SABRENT Rocket NVMe SSD is designed for M.2 2280 slots.

2.1. التثبيت المادي

1. قم بإعداد نظامك: Ensure your computer is powered off and unplugged. Open your computer case to access the motherboard.
2. حدد موقع فتحة M.2: حدد فتحة M.2 2280 متاحة على اللوحة الأم الخاصة بك.
3. أدخل SSD: Gently insert the SABRENT Rocket SSD into the M.2 slot at a 30-degree angle. Push it down until it clicks into place.
4. تأمين SSD: Use the provided screw (or motherboard's M.2 screw) to secure the SSD to the motherboard standoff.
5. Heatsink (Recommended for PCIe Gen4): If your motherboard supports PCIe Gen4, a heatsink is highly recommended to dissipate heat and prevent thermal throttling, maximizing performance.

Image: The SABRENT Rocket NVMe 4.0 SSD securely installed in an M.2 slot on a motherboard, demonstrating smart compatibility.

2.2. Initializing and Cloning

After physical installation, the SSD needs to be initialized and formatted. If you are migrating from an existing drive, you can use cloning software.

• التهيئة والتنسيق: Access your operating system's Disk Management utility (Windows) or Disk Utility (macOS) to initialize and format the new SSD.
• Cloning Software: All Sabrent SSDs come with FREE Sabrent Acronis True Image software for easy cloning. Visit the Sabrent website for download and instructions. This software allows you to make an exact copy of your old drive onto the new Sabrent SSD.

Video: An official Sabrent video demonstrating how to clone your disk using Sabrent Rocket Drive and Acronis software.

3. Operating Principles: PCIe Generations

Understanding PCIe generations is key to maximizing your SSD's performance. PCIe (Peripheral Component Interconnect Express) is a high-speed serial computer expansion bus standard.

3.1. PCIe 3.0 vs. PCIe 4.0

The SABRENT Rocket NVMe SSD utilizes the PCIe 4.0 standard, offering significantly higher bandwidth compared to PCIe 3.0. To achieve the advertised speeds (up to 5000 MB/s read and 4400 MB/s write), a PCIe Gen4 motherboard is required. If installed on a PCIe Gen3 motherboard, speeds will be limited to Gen3 capabilities (e.g., up to 3400 MB/s read and 3000 MB/s write).

فيديو: أكثر منview explaining the differences and benefits of PCIe 3.0 versus PCIe 4.0 technology.

Image: A chart illustrating the sequential read and write speeds of Sabrent NVMe Gen4 SSD compared to PCIe 3.0 SSDs, SATA SSDs, and SATA HDDs.

3.2. Backward Compatibility

The SABRENT Rocket NVMe PCIe 4.0 M.2 2280 Internal SSD is backward compatible with PCIe 3.0. This means it will function in a PCIe Gen3 slot, but its performance will be limited to the maximum speeds supported by PCIe 3.0.

4. المميزات

• NVMe M.2 PCIe Gen4 x4 Interface
• Built to the PCIe 4.0 specification / NVMe 1.3 Compliant
• Power Management Support for APST / ASPM / L1.2
• Supports SMART and TRIM commands
• Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface
• Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision
• البرامج الثابتة القابلة للترقية
• Includes FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning.

Image: The SABRENT Rocket NVMe 4.0 SSD, emphasizing its superior performance, power efficiency, and unmatched reliability features.

5. الصيانة

To ensure the longevity and optimal performance of your SSD, regular maintenance is recommended.

• تحديثات البرامج الثابتة: Periodically check the Sabrent website for firmware updates for your SSD. Keeping the firmware up-to-date can improve performance and stability.
• أمر TRIM: Ensure your operating system has TRIM enabled. TRIM helps the SSD manage its stored data more efficiently, maintaining performance over time.
• النسخ الاحتياطي للبيانات: Regularly back up important data using the included Acronis True Image software or another reliable backup solution.

6. استكشاف الأخطاء وإصلاحها

If you encounter issues with your SABRENT Rocket NVMe SSD, consider the following:

• Performance Lower Than Expected:
  • Verify your motherboard supports PCIe Gen4.0. If it's Gen3, speeds will be limited.
  • Ensure a heatsink is installed, especially on PCIe Gen4 motherboards, to prevent thermal throttling.
  • Check that your system drivers (chipset, NVMe) are up to date.
• لم يتم اكتشاف SSD:
  • تأكد من تثبيت محرك الأقراص ذي الحالة الصلبة (SSD) بشكل صحيح في فتحة M.2 وتثبيته بإحكام.
  • Check your motherboard's BIOS/UEFI settings to ensure the M.2 slot is enabled and configured correctly (e.g., NVMe mode).
  • If it's a new drive, ensure it has been initialized and formatted in Disk Management (Windows) or Disk Utility (macOS).

7. المواصفات

8. ماذا يوجد في الصندوق

• 1TB Rocket NVMe PCIe 4.0 M.2 2280 SSD
• دليل المستخدم (هذا المستند)

9. الضمان والدعم

The SABRENT 1TB Rocket NVMe PCIe 4.0 M.2 2280 Internal SSD comes with a 5-year warranty upon online registration within 90 days of purchase. For technical support, firmware updates, or additional information, please visit the official SABRENT webموقع.