1. المقدمة
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Zipper ZI-CR342 Pet Enclosure. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
الشكل 1: The Zipper ZI-CR342 Pet Enclosure. This image shows the complete structure of the enclosure, featuring a galvanized metal frame and PVC-coated wire mesh walls, with a door for access. The peaked roof design provides ample space and protection.
2. تعليمات السلامة
- تأكد من تثبيت جميع المكونات بإحكام أثناء التجميع لمنع الانهيار.
- Place the enclosure on a level, stable surface to maintain structural integrity.
- Regularly inspect the enclosure for any damaged parts, sharp edges, or loose connections. Repair or replace as necessary.
- لا تسمح للأطفال بالتسلق على الحظيرة أو اللعب داخلها دون إشراف.
- This enclosure is designed for pets; do not use it for purposes other than its intended use.
- Wear appropriate protective gear (gloves) during assembly to avoid cuts from wire mesh or metal edges.
3. محتويات العبوة
تأكد من وجود جميع المكونات المدرجة أدناه وأنها غير تالفة قبل البدء في التجميع.
- Galvanized steel tubes (Ø25 x 0.65 mm) for frame construction.
- PVC-coated galvanized wire mesh panels.
- UV-resistant sun protection film for the roof.
- Door assembly with zipper closure.
- Fixing materials (connectors, bolts, nuts, cable ties).
4. الإعداد والتجميع
The Zipper ZI-CR342 features a simple modular interlocking system for straightforward assembly. Two people are recommended for easier setup.
- إعداد المنطقة: Choose a flat, clear, and stable outdoor location for the enclosure. Ensure adequate space for the 3m x 4m footprint.
- تجميع الإطار الأساسي: Connect the galvanized tubes to form the rectangular base (3m x 4m) using the provided connectors. Ensure all connections are snug.
- نصب دعامات رأسية: Attach the vertical tubes to the base frame at designated points.
- تركيب هيكل السقف: Construct the peaked roof frame by connecting the remaining tubes to the vertical supports.
- قم بتثبيت ألواح شبكية سلكية: Secure the PVC-coated galvanized wire mesh panels to the frame using the provided fixing materials (e.g., cable ties, clips). Ensure the mesh is taut and covers all open sides.
- تثبيت الباب: Integrate the door assembly into the designated opening. Ensure it opens and closes smoothly and the zipper closure functions correctly.
- Apply Sun Protection Film: Drape and secure the UV-resistant sun protection film over the roof section. This provides shade and protection from the elements.
- التفتيش النهائي: Double-check all connections, ensuring they are tight and secure. Verify there are no gaps or sharp edges that could harm animals.
الشكل 2: Detail of a frame joint. This image illustrates how the galvanized tubes connect using the modular system, highlighting the secure fastening points essential for structural stability.
الشكل 3: Detail of the wire mesh. The PVC-coated galvanized wire mesh provides durability and protection for the animals within the enclosure.
5. تشغيل الحاوية
- وصول: Use the zippered door for entry and exit. Always ensure the zipper is fully closed when animals are inside to prevent escape.
- الموقع: Position the enclosure in an area that offers additional natural shade or protection from strong winds, if possible, in addition to the provided sun protection film.
- Animal Introduction: Introduce pets to the enclosure gradually, ensuring they have access to food, water, and appropriate shelter within the enclosure (e.g., a small coop for poultry).
الشكل 4: Example of enclosure use. This image demonstrates the Zipper ZI-CR342 Pet Enclosure in a typical setup, providing a secure and spacious environment for poultry, complete with an internal shelter.
6. الصيانة
- تنظيف: Regularly clean the enclosure, including the mesh and frame, with mild soap and water. Rinse thoroughly and allow to dry.
- تقتيش: Periodically check all frame connections, mesh integrity, and the door mechanism for wear or damage. Tighten any loose bolts.
- UV Film: Inspect the UV protection film for tears or degradation. Replace if necessary to maintain sun protection.
- فصل الشتاء: In areas with heavy snow or extreme weather, consider disassembling or reinforcing the enclosure to prevent damage.
7. استكشاف الأخطاء وإصلاحها
- Enclosure Instability: Ensure all frame tubes are fully inserted into connectors and all bolts are tightened. Verify the enclosure is on level ground.
- تلف الشبكة: Small tears in the PVC-coated mesh can often be repaired with heavy-duty zip ties or specialized mesh repair kits. For large damage, consider replacing the affected panel.
- عطل السوستة: Check for obstructions in the zipper teeth. Apply a silicone-based lubricant if the zipper is stiff. If damaged, the door panel may need replacement.
8. المواصفات
| ميزة | التفاصيل |
|---|---|
| نموذج | ZI-CR342 |
| الأبعاد (الطول × العرض × الارتفاع) | 3 m x 4 m x 2 m (approximately 9.8 ft x 13.1 ft x 6.6 ft) |
| وزن | 35.9 كجم (حوالي 79.1 رطل) |
| مادة الإطار | Galvanized Steel Tubes (Ø25 x 0.65 mm) |
| مادة شبكية | PVC-coated Galvanized Wire Mesh |
| مادة السقف | UV-resistant Sun Protection Film |
| نوع الإغلاق | سستة |
| المميزات الخاصة | Modular interlocking system, UV resistant |
الشكل 5: Enclosure dimensions. This diagram provides a clear overview of the enclosure's measurements, including its overall length, width, height, and the dimensions of the access door.
9. الضمان والدعم
The Zipper ZI-CR342 Pet Enclosure comes with a توفر قطع الغيار لمدة عامين. For warranty claims, technical support, or to order replacement parts, please contact your retailer or the manufacturer directly. Ensure you have your proof of purchase and model number (ZI-CR342) ready when contacting support.
