King Gates Mini Modus Novo 24G8 Kit - Swing Gate Operator Instruction Manual

مقدمة

This manual provides detailed instructions for the installation, operation, and maintenance of the King Gates Mini Modus Novo 24G8 Swing Gate Kit. This system is specifically designed for gates with reduced space requirements, offering a robust and reliable solution for automated gate access.

The articulated arm geometry allows installation even on large pillars, accommodating a distance of up to 240 mm between the gate leaf axis and the motor-reducer fixing surface. The system operates on a 230V power supply with 24V electromechanical locking motors.

المنتج انتهىview

The King Gates Mini Modus Novo 24G8 kit includes the following components:

• 1 Master Motor-Reducer (MINIMODUSMA): Contains the control logic and battery compartment.
• 1 Slave Motor-Reducer (MINIMODUSSL): Companion unit for dual gate operation.
• 2 STYLO4KE Remote Controls: 4-function rolling code remote controls for gate operation.
• 1 Pair of NOVOPH180 Infrared Photocells: Safety sensors to detect obstacles.
• 1 NOVOLEDPLUS Signal Light + Antenna: For visual signaling during gate operation and improved remote range.

Image: Complete King Gates Mini Modus Novo 24G8 Kit showing both motor units, remote controls, photocells, and control board.

الإعداد والتثبيت

Installation of the Mini Modus system is designed to be straightforward. The motor-reducer can be quickly and conveniently fixed to the pillar and gate using screw-on brackets, eliminating the need for welding.

1. Mounting the Motor Units

Position the master and slave motor-reducers on the gate pillars. Ensure the articulated arm geometry is correctly aligned to accommodate the gate's swing and pillar dimensions. The system supports up to 240 mm distance between the gate leaf axis and the motor-reducer fixing surface.

Image: A single King Gates Mini Modus motor unit, illustrating its compact design and articulated arm.

2. التوصيلات الكهربائية

Connect the system to a 230V power supply. The internal electromechanical motors operate at 24V. The control logic and battery compartment are located inside the master MiniModus unit.

الصورة: داخلية view of the King Gates Mini Modus master unit, showing the control board and wiring terminals.

3. Installing Safety Devices

Install the NOVOPH180 infrared photocells at appropriate heights and distances to ensure proper obstacle detection. These sensors are crucial for the safety device with obstacle reversal function.

Image: One of the King Gates NOVOPH180 infrared photocells, typically used as a transmitter.

Image: The other King Gates NOVOPH180 infrared photocell, typically used as a receiver, completing the safety beam.

4. الاقتران التحكم عن بعد

Follow the instructions provided with the STYLO4KE remote controls to pair them with the gate operator. Ensure all 4 functions are correctly programmed.

Image: A King Gates STYLO4KE 4-button rolling code remote control.

5. Mechanical Limit Stops

Adjust the mechanical end-of-travel stops for the opening cycle to ensure precise gate positioning.

تعليمات التشغيل

التشغيل القياسي

Use the provided STYLO4KE remote control to open and close the gate. Pressing the designated button will initiate the gate's movement. The NOVOLEDPLUS signal light will activate during operation.

ميزات السلامة

The system is equipped with a safety device that reverses gate movement upon obstacle detection. Ensure the infrared photocells are clean and unobstructed for optimal performance.

القوة Outagه العملية

في حالة انقطاع الطاقةtage, the system can continue to operate for several hours using the optional battery backup (batteries not included in standard kit, but compartment is present). This ensures continued access even during electrical interruptions.

Full and Pedestrian Opening

The system supports both full gate opening for vehicles and a pedestrian opening function, allowing one gate leaf to open partially for foot traffic.

صيانة

Regular maintenance ensures the longevity and optimal performance of your King Gates Mini Modus system.

• تنظيف: Periodically clean the infrared photocells to prevent false obstacle detections. Wipe down the motor units to remove dirt and debris.
• الفحص الميكانيكي: Inspect the articulated arms and mounting brackets for any signs of wear or loosening. Ensure all screws are tight.
• الإفراج اليدوي: The unlocking maneuver, common to all King Gates products, is simple and quick. Familiarize yourself with this procedure for manual gate operation during power failures or maintenance.
• Battery Check (if installed): If optional batteries are installed, check their charge and condition periodically.

استكشاف الأخطاء وإصلاحها

يُقدّم هذا القسم إرشادات عامة للمشاكل الشائعة. أما بالنسبة للمشاكل المعقدة، فيُرجى استشارة فني مؤهل.

• البوابة لا تستجيب:
  • تحقق من مصدر الطاقة الخاص بالوحدة.
  • تأكد من عدم نفاد بطاريات جهاز التحكم عن بعد.
  • Verify that the photocells are clean and unobstructed.
• Gate Reverses Unexpectedly:
  • Clean photocells thoroughly.
  • التحقق من عدم وجود أي عوائق مادية في مسار البوابة.
• Gate Moves Slowly or Jerkily:
  • Inspect mechanical components for friction or damage.
  • Ensure the gate itself moves freely when disengaged.

تحديد

معلومات الضمان

The King Gates Mini Modus Novo 24G8 Kit comes with a ضمان لمدة 3 سنوات يسري هذا الضمان من تاريخ الشراء. ويغطي عيوب التصنيع ويضمن الأداء السليم للمنتج في ظل الاستخدام العادي. يرجى الاحتفاظ بإثبات الشراء لتقديم مطالبات الضمان.

الدعم والاتصال

For technical assistance, spare parts, or further inquiries regarding your King Gates Mini Modus Novo 24G8 Kit, please contact your authorized King Gates dealer or visit the official King Gates webموقع.

الموارد المتاحة على الإنترنت: www.kinggates.com (ملاحظة: هذا عنصر نائب URL, please refer to the official product documentation for the correct support webموقع.)