المنتج انتهىview
The lightmaXX CLS Nano RGBW is an LED lighting system featuring four spotlights, designed for use on theater and stage productions. Its compact size and low weight also make it suitable for mobile applications.
Each spotlight is equipped with three powerful 4W QCL LEDs, contributing to a total power consumption of 48 watts. The COB LEDs incorporate red, green, blue, and white primary colors, allowing for the creation of a wide spectrum of other colors through mixing. The beam angle is 25 degrees. Additionally, the QCL LEDs offer stepless dimming from 0-100% and can produce a powerful strobe effect. Control options include DMX and music control.
The lightmaXX CLS Nano RGBW LED Spot Set, showcasing its four individual spotlights mounted on a central bar, with the LEDs emitting green light.
تعليمات السلامة
يرجى قراءة جميع تعليمات السلامة وفهمها جيداً قبل تشغيل الجهاز. قد يؤدي عدم القيام بذلك إلى الإصابة أو تلف المنتج.
- قم دائمًا بتوصيل الجهاز بمأخذ طاقة مؤرض.
- تأكد من التهوية المناسبة حول الوحدة لمنع ارتفاع درجة الحرارة.
- لا تعرض الجهاز للمطر أو الرطوبة.
- تجنب تعرض العين المباشر لمصدر الضوء.
- Only qualified personnel should perform service or repairs.
- افصل الطاقة قبل التنظيف أو الصيانة.
يثبت
فك التعبئة
Carefully remove the CLS Nano RGBW from its packaging. Inspect the unit for any signs of damage during transit. Retain the packaging for future storage or transport.
التركيب
The CLS Nano RGBW is designed for secure mounting on a lighting stand or truss system. Use appropriate clamps and safety cables (not included) to ensure the unit is securely fastened and cannot fall. Ensure the mounting surface can support the weight of the fixture (7.13 kg).
الاتصالات
قم بتوصيل الجهاز على النحو التالي:
- توصيل الطاقة: Use the provided IEC power cable to connect the unit to a suitable mains power outlet.
- اتصال DMX (اختياري): For DMX control, connect a 3-pin XLR DMX cable from your DMX controller's output to the unit's DMX IN port. If linking multiple units, connect from the first unit's DMX OUT to the next unit's DMX IN.
تفاصيل الجزء الخلفي view of the lightmaXX CLS Nano RGBW, highlighting the power input, DMX In/Out ports, and the digital control display with navigation buttons.
تعليمات التشغيل
انتهت لوحة التحكمview
The control panel on the rear of the unit features a digital display and four buttons:
- MENU: يتنقل بين خيارات القائمة الرئيسية.
- فوق: يزيد القيم أو ينتقل إلى أعلى خيارات القائمة.
- أسفل: يُقلل القيم أو ينتقل لأسفل عبر خيارات القائمة.
- أدخل: تأكيد الاختيارات أو الدخول إلى القوائم الفرعية.
أوضاع التشغيل
The CLS Nano RGBW offers several operating modes:
- وضع DMX: For external control via a DMX controller.
- نظام آلي: Runs pre-programmed light shows automatically.
- وضع تنشيط الصوت: Reacts to music or sound via a built-in microphone.
- وضع اللون الثابت: Displays a single, constant color.
تحكم DMX
To operate the unit via DMX, set the DMX address using the control panel. Refer to the DMX channel chart in the full manual for specific channel functions (e.g., Dimmer, Red, Green, Blue, White, Strobe, Programs).
برامج تلقائية
Navigate to the Auto mode setting using the MENU button. Use UP/DOWN to select different built-in programs. Press ENTER to confirm. Some programs may allow adjustment of speed or intensity.
وضع تنشيط الصوت
Select the Sound-Activated mode from the menu. The unit will use its internal microphone to react to ambient sound. Adjust the microphone sensitivity if available in the menu to fine-tune the response.
وضع اللون الثابت
In Static Color mode, you can manually select a desired color. Use the UP/DOWN buttons to adjust the intensity of Red, Green, Blue, and White LEDs to create custom colors.
The lightmaXX CLS Nano RGBW LED Spot Set displaying a vibrant red color output from its four spotlights.
The lightmaXX CLS Nano RGBW LED Spot Set illuminating with a deep blue color.
The lightmaXX CLS Nano RGBW LED Spot Set producing a bright white light.
The lightmaXX CLS Nano RGBW LED Spot Set emitting a warm yellow light.
The lightmaXX CLS Nano RGBW LED Spot Set displaying a cool cyan light.
The lightmaXX CLS Nano RGBW LED Spot Set showcasing a rich purple illumination.
The lightmaXX CLS Nano RGBW LED Spot Set with its spotlights in an off state, showing the clear lenses.
صيانة
تنظيف
Regular cleaning helps maintain optimal performance and appearance. Disconnect the unit from power before cleaning.
- استخدم قطعة قماش ناعمة وخالية من الوبر لمسح السطح الخارجي.
- For lenses, use a specialized lens cleaner and a soft cloth to avoid scratches.
- لا تستخدم المنظفات الكاشطة أو المذيبات أو المواد الكيميائية القاسية.
تخزين
When not in use for extended periods, store the CLS Nano RGBW in its original packaging or a suitable flight case. Store in a cool, dry place away from direct sunlight and extreme temperatures.
استكشاف الأخطاء وإصلاحها
يتناول هذا القسم المشكلات الشائعة التي قد تواجهها. إذا استمرت المشكلة، فاتصل بخدمة دعم العملاء.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يوجد طاقة | Power cable disconnected; Outlet not active; Fuse blown | Check power cable connection; Test outlet with another device; Replace fuse (if applicable and safe to do so) |
| لا تحكم DMX | Incorrect DMX address; Faulty DMX cable; DMX controller issue; Master/Slave conflict | Verify DMX address setting; Test/replace DMX cable; Check DMX controller output; Ensure correct Master/Slave configuration |
| Lights not responding in Auto/Sound mode | Incorrect mode selected; Microphone sensitivity too low (Sound mode) | Ensure correct operating mode is selected; Adjust microphone sensitivity in Sound mode |
| وحدة يسخن | Insufficient ventilation; Blocked cooling vents | Ensure adequate space around the unit; Clean any dust or debris from cooling vents |
تحديد
| نموذج | LIG0015656-000 |
| ماركة | لايت ماكس |
| الأبعاد (الطول × العرض × الارتفاع) | 88.6 × 38 × 18.8 سم |
| وزن | 7.13 كجم |
| نوع الصمام | 4 x (3x 4W QCL RGBW LEDs) |
| إجمالي استهلاك الطاقة | 48 واط |
| زاوية الشعاع | 25° |
| أوضاع التحكم | DMX, Auto, Sound-activated, Static Color |
| سمات | Dimmable, Strobe Effect, DMX Control, Music Control, RGBW LED |
| مصدر الطاقة | Mains Power (IEC C14) |
| الشركة المصنعة | لايت ماكس |
| بلد المنشأ | ألمانيا |
| أول تاريخ متاح | 15 يناير 2020 |
الضمان والدعم
This lightmaXX product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact the seller directly.
For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your authorized lightmaXX dealer or the manufacturer's customer service department. Keep your purchase receipt and model number (LIG0015656-000) ready when contacting support.
