دليل التعليمات

المنتج انتهىview

The Unity Automotive 11725 Front Left Complete Strut Assembly is engineered to provide a hassle-free solution for replacing your vehicle's suspension. This preassembled unit includes all necessary components, such as the top mount, bearing plate, bumper, insulators, and coil spring, eliminating the need for specialized tools during installation. It is designed to restore your vehicle's factory ride height and ensure a stable, comfortable ride.

Unity Automotive has over 50 years of experience in manufacturing high-quality aftermarket automotive parts, focusing on durability and reliability.

الميزات الرئيسية

• Preassembled Design: Includes top mount, bearing plate, bumper, insulators, and coil spring for a complete unit.
• Restores Ride Quality: Engineered to restore factory ride height and provide a stable, comfortable driving experience.
• Trouble-Free Installation: Designed for superior fit and eliminates the need for specialty tools.
• Hassle-Free Repair: All new components ensure a straightforward replacement process.
• ملاءمة محددة للمركبة: Ensures precise compatibility with specified vehicle models.

محتويات الحزمة

عند فتح العبوة، ستجد العنصر التالي:

• (1) Unity Automotive 11725 Front Left Complete Strut Assembly

توافق السيارة

This Unity Automotive 11725 Front Left Complete Strut Assembly is compatible with the following vehicle:

• يصنع: مراوغة
• نموذج: دارت
• سنين: 2013-2016
• موضع: Front Driver Side (Left)

ملاحظة التركيب: هذا الجزء يستثني SE, SXT, and Rallye Models of the Dodge Dart.

دليل التثبيت

معلومات هامة حول السلامة: Installation of automotive suspension components should only be performed by qualified individuals with proper tools and safety equipment. Failure to follow proper procedures can result in serious injury or damage to the vehicle. Always consult a professional mechanic if you are unsure about any step.

الأدوات المطلوبة (نموذجية):

• رافعة السيارة ودعامات الرفع
• دعامات العجلات
• تعيين وجع مأخذ التوصيل
• مفتاح عزم الدوران
• زيت نافذ
• نظارات وقفازات السلامة

خطوات التثبيت العامة:

1. تجهيز السيارة: Park the vehicle on a level surface, engage the parking brake, and chock the rear wheels. Loosen the lug nuts on the front left wheel.
2. Lift Vehicle: Safely lift the front of the vehicle using a jack and secure it with jack stands. Remove the front left wheel.
3. فصل المكونات: Locate the existing strut assembly. Disconnect any brake lines, ABS sensor wires, or sway bar links attached to the strut.
4. Remove Old Strut: Unbolt the lower mounting bolts connecting the strut to the steering knuckle. Then, unbolt the upper mounting nuts from the strut tower under the hood. Carefully remove the old strut assembly from the vehicle.
5. Install New Strut: Position the new Unity Automotive 11725 complete strut assembly into the strut tower. Secure the upper mounting nuts, but do not fully tighten yet.
6. Connect Lower Mount: Align the lower mounting holes of the new strut with the steering knuckle. Insert and hand-tighten the lower mounting bolts.
7. إعادة توصيل المكونات: Reattach any brake lines, ABS sensor wires, and sway bar links that were disconnected.
8. مثبتات عزم الدوران: Refer to your vehicle's service manual for specific torque specifications. Fully tighten all upper and lower mounting bolts/nuts to the manufacturer's recommended torque.
9. إعادة تثبيت العجلة: Reinstall the front left wheel and hand-tighten the lug nuts.
10. السيارة السفلية: Safely lower the vehicle to the ground. Fully tighten the lug nuts to the manufacturer's specifications.
11. التحقق النهائي: After installation, it is highly recommended to have a professional alignment performed to ensure proper vehicle handling and tire wear.

Image: The Unity Automotive 11725 Front Left Complete Strut Assembly, showing the integrated coil spring, strut body, and mounting points. This preassembled unit simplifies the installation process by including all necessary components.

الصيانة والعناية

The Unity Automotive 11725 Complete Strut Assembly is designed for long-lasting reliability and typically requires minimal maintenance after proper installation. However, regular vehicle inspections are recommended to ensure optimal performance and safety.

• التفتيشات الدورية: Periodically inspect the strut assembly for any signs of damage, leaks, or excessive wear. Check the rubber boots for cracks and ensure all mounting bolts remain tight.
• تنسيق: After replacing any suspension component, it is crucial to have a professional wheel alignment performed. This ensures correct steering, handling, and prevents premature tire wear.
• تنظيف: Keep the strut assembly free from excessive dirt, salt, and debris, especially in harsh weather conditions. A simple rinse with water during vehicle washing is usually sufficient.
• تجنب التحميل الزائد: Do not exceed your vehicle's Gross Vehicle Weight Rating (GVWR) as this can put undue stress on suspension components, including the strut assembly.

استكشاف الأخطاء وإصلاحها للمشكلات الشائعة

If you experience any issues after installing your new strut assembly, consider the following common problems and their potential solutions. Always consult a certified mechanic for complex issues or if you are unsure.

مواصفات المنتج

معلومات السلامة

Always prioritize safety when working on your vehicle's suspension system. Improper installation or handling can lead to serious injury or vehicle damage.

• يوصى بالتركيب الاحترافي: If you are not experienced with automotive repairs, it is highly recommended to have this part installed by a certified professional mechanic.
• استخدم الأدوات المناسبة: Always use appropriate and well-maintained tools for the job, including a reliable jack, sturdy jack stands, and a torque wrench.
• معدات الحماية الشخصية: Wear safety glasses, gloves, and appropriate work attire to protect yourself from potential hazards.
• استقرار السيارة: Ensure the vehicle is securely supported on jack stands before beginning any work underneath. Never rely solely on a jack.
• مواصفات عزم الدوران: Always tighten fasteners to the vehicle manufacturer's specified torque settings. Overtightening or undertightening can lead to component failure.
• تحذير بشأن الاقتراح 65: قد يحتوي هذا المنتج على مواد كيميائية معروفة في ولاية كاليفورنيا بأنها تسبب السرطان أو تشوهات خلقية أو غيرها من الأضرار التناسلية. اغسل يديك بعد المناولة.

الضمان والدعم

For information regarding the warranty of your Unity Automotive 11725 Front Left Complete Strut Assembly, please refer to the documentation included with your purchase or visit the official Unity Automotive website. For technical support or assistance with installation, please contact Unity Automotive customer service directly.

معلومات الاتصال: يرجى الرجوع إلى الموقع الرسمي للشركة المصنعة website or product packaging for the most current contact details for customer support.