المنتج انتهىview
The Moen Align Chrome Posi-Temp Shower Valve with Built-in 3-Function Transfer Valve Trim Kit, Model T2190, offers a modern design and reliable performance for your shower system. This trim kit is designed to work with a compatible Moen Posi-Temp valve (sold separately) to provide consistent water temperature and allow selection between multiple showering functions.
Image 1: Moen Align Chrome Posi-Temp Shower Valve Trim Kit (Model T2190). This image displays the chrome-finished trim kit, featuring the main temperature/volume control handle and the lower transfer valve handle, set within an oval escutcheon plate.
المميزات الرئيسية:
- إنهاء كروم: Highly reflective, mirror-like appearance that complements various bathroom styles.
- Built-in 3-Function Transfer Valve: Directs water flow to multiple showering components.
- Posi-Temp Pressure Balancing: Maintains water pressure and temperature even when other water sources are in use (requires compatible Posi-Temp valve).
- متوافق مع ADA: Designed to meet Americans with Disabilities Act specifications for accessibility.
- Align Collection: Coordinates with other Moen Align collection products for a cohesive design.
التثبيت والإعداد
This trim kit is designed for installation with a specific Moen Posi-Temp valve, which is sold separately. Ensure you have one of the following compatible Moen valve models installed behind the wall: 2521, 2551, 2571, or 2581.
Image 2: Required Moen Posi-Temp Valve (Sold Separately). This image shows the brass rough-in valve body with connections for hot and cold water lines, and the Posi-Temp cartridge housing. This valve is essential for the trim kit's functionality.
قائمة التحقق قبل التثبيت:
- Confirm the presence of a compatible Moen Posi-Temp valve (models 2521, 2551, 2571, or 2581).
- Ensure the main water supply to the shower area is turned off.
- Gather all necessary tools, including screwdrivers and an adjustable wrench.
Refer to the detailed installation instructions provided with your specific Moen Posi-Temp valve and the trim kit for step-by-step guidance. Professional installation is recommended to ensure proper function and adherence to local plumbing codes.
تعليمات التشغيل
The Moen Align T2190 trim kit provides intuitive control over your shower experience.
Temperature and Volume Control:
- To turn the water on or off, rotate the upper handle.
- To adjust the water temperature, rotate the upper handle counter-clockwise for warmer water and clockwise for cooler water. The Posi-Temp valve will maintain your selected temperature.
Function Selection (Transfer Valve):
- The lower handle controls the water flow between different showering components (e.g., main showerhead, handshower, or other accessories).
- Rotate the lower handle to select the desired water outlet. The specific positions will correspond to the installed functions.
العناية والصيانة
Proper care will help maintain the appearance and functionality of your Moen Align shower trim kit.
- تنظيف: نظف سطح الكروم بقطعة قماش ناعمة و...amp cloth and mild, non-abrasive soap. Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
- Hard Water Spots: For hard water spots, a solution of white vinegar and water can be applied with a soft cloth. Allow it to sit briefly, then rinse thoroughly with clean water and dry.
- التفتيش الدوري: Periodically inspect the trim kit for any signs of leaks or unusual operation. Address any issues promptly to prevent potential damage.
دليل اصلاح الاخطاء
This section addresses common issues you might encounter with your shower valve trim kit.
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| درجة حرارة الماء غير ثابتة | Faulty Posi-Temp cartridge; fluctuating water pressure in the home. | Ensure the Posi-Temp valve is correctly installed. If issues persist, the cartridge may require replacement. Consult a qualified plumber. |
| انخفاض تدفق المياه | Clogged showerhead or handshower; debris in the valve. | Clean showerhead/handshower nozzles. If flow remains low, the valve cartridge might be obstructed or faulty. |
| Water Leaks from Handle | Loose handle screws; worn O-rings or seals in the cartridge. | Tighten handle screws. If leaking continues, the valve cartridge may need to be replaced. |
| وظائف تبديل الصعوبة | Transfer valve cartridge issue; debris. | Inspect the transfer valve cartridge for obstructions or wear. Replacement may be necessary. |
For complex issues or if you are unsure about performing repairs, it is recommended to contact a qualified plumber or Moen customer support.
مواصفات المنتج
| يصف | التفاصيل |
|---|---|
| ماركة | موين |
| رقم الموديل | ت2190 |
| مادة | معدن |
| لون | الكروم |
| النهاية الخارجية | الكروم |
| أبعاد العنصر (الطول × العرض × الارتفاع) | 2.38 × 6.88 × 11.13 بوصة |
| وزن العنصر | 1.95 رطل |
| طريقة التثبيت | مثبت على الحائط |
| حجم اتصال المدخل | 0.5 بوصة |
| نوع اتصال المدخل | اي بي اس |
| حجم اتصال المخرج | 0.5 بوصة |
| نوع توصيل المنفذ | اي بي اس |
| المكونات المضمنة | Valve trim kit |
| Required Valve | Moen Posi-Temp Valve (2521, 2551, 2571, or 2581) - Sold Separately |
| رمز المنتج الموحد | 026508300107 |
معلومات الضمان
هذا المنتج من موين مدعوم بـ ضمان محدود مدى الحياة. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Moen webموقع.
دعم العملاء
For further assistance, technical support, or to order replacement parts, please contact Moen customer service. You can find contact information on the official Moen webالموقع أو بالرجوع إلى الوثائق المرفقة مع منتجك.
موين الرسمية Webموقع: www.moen.com
