Spanninga Pimento XE Electric Rear Light User Manual

1. انتهى المنتجview

The Spanninga Pimento XE is a high-quality electric rear light designed for bicycles, featuring an integrated reflector for enhanced visibility. This light is specifically engineered to operate with a 6.36V DC power source, commonly found on e-bikes or dynamo systems. Its robust construction and IP67 waterproof rating ensure reliable performance in various weather conditions. The light is designed for easy mounting on a bicycle's rear luggage rack.

الشكل 1: الجبهة view of the Spanninga Pimento XE Electric Rear Light, showing the red light lens and the integrated rectangular reflector below it.

2. معلومات السلامة

Please read all safety instructions carefully before installation and use. Failure to do so may result in injury or damage to the product.

• الرؤية: Always ensure the light is clean and unobstructed to maximize visibility to other road users.
• تثبيت: Improper installation can lead to the light detaching during riding. Ensure all mounting hardware is securely fastened. If unsure about electrical connections, consult a qualified bicycle mechanic.
• التوصيل الكهربائي: This light operates on 6.36V DC. Connecting it to an incompatible power source (e.g., higher voltage AC) may damage the light and pose a fire hazard.
• مقاومة الماء: While the light is IP67 waterproof, avoid submerging it for extended periods or using high-pressure water jets directly on the unit.
• العاكس: The integrated reflector is a crucial safety feature. Keep it clean and free from dirt or damage.

3. محتويات العبوة

عند فتح العبوة، يرجى التأكد من أن جميع المكونات موجودة وغير تالفة:

• Spanninga Pimento XE Electric Rear Light Unit
• Mounting Hardware (screws, nuts, washers for luggage rack attachment)

Note: Batteries are not included as this light is designed to be powered by your bicycle's electrical system.

4. التثبيت

The Spanninga Pimento XE is designed for mounting on a standard bicycle luggage rack. Follow these steps for proper installation:

1. إعداد منطقة التركيب: Identify the two mounting holes on your bicycle's rear luggage rack, typically spaced for standard rear lights.
2. ضع الضوء: Align the mounting holes on the back of the Pimento XE light with the holes on your luggage rack. Ensure the light is oriented correctly, with the reflector facing directly backward.

الشكل 2: الجزء العلوي view of the Pimento XE light unit, highlighting the two screw holes for mounting to a luggage rack.
3. تأمين الضوء: Insert the provided mounting screws through the light's holes and into the luggage rack. Secure with nuts and washers from the underside. Tighten firmly but do not overtighten to avoid damaging the plastic housing.


الشكل 3: القاع view of the Pimento XE light unit, showing the two threaded posts for secure attachment to the bicycle's luggage rack.

4. التوصيل الكهربائي: Connect the light's wires to your bicycle's 6.36V DC power system. Ensure correct polarity (positive to positive, negative to negative) to prevent damage. If you are unsure about wiring, it is highly recommended to seek assistance from a professional bicycle mechanic.

5. التشغيل

The Spanninga Pimento XE Electric Rear Light is designed for simple, reliable operation. Once properly installed and connected to your bicycle's 6.36V DC power system, the light will illuminate automatically when power is supplied (e.g., when your e-bike system is turned on or your dynamo is active). There is only one setting for this light, providing consistent rear illumination.

الشكل 4: الجانب الإيجابيfile of the Pimento XE light, illustrating its compact design.

6. الصيانة

To ensure the longevity and optimal performance of your Spanninga Pimento XE rear light, follow these simple maintenance guidelines:

• تنظيف: Regularly wipe the light lens and reflector with a soft, damp cloth to remove dirt and grime. Avoid abrasive cleaners or solvents, as they may damage the plastic.
• فحص الاتصال: Periodically inspect the electrical connections to ensure they are secure and free from corrosion.
• تصاعد الأمن: Check the mounting screws regularly to ensure they remain tight. Retighten if necessary.
• فحص الضرر: Inspect the light for any cracks or damage to the housing or lens, which could compromise its waterproof integrity.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your Spanninga Pimento XE light, refer to the following common troubleshooting steps:

• الضوء لا يضيء:
  • Check the electrical connections to ensure they are secure and correctly wired to the 6.36V DC power source.
  • Verify that your bicycle's power system (e-bike battery, dynamo) is active and supplying power.
  • Inspect the wiring for any cuts or damage.
• وميض الضوء:
  • This often indicates a loose electrical connection. Re-check all wiring connections.
  • Ensure the power source is stable and not fluctuating.
• إخراج الضوء الخافت:
  • Clean the light lens and reflector thoroughly.
  • Verify that the power source is providing the correct voltagه (6.36 فولت تيار مستمر).

If these steps do not resolve the issue, please contact Spanninga customer support or your local dealer.

8. المواصفات

9. الضمان والدعم

For information regarding warranty coverage, technical support, or spare parts for your Spanninga Pimento XE Electric Rear Light, please refer to the official Spanninga website or contact your authorized Spanninga dealer. Keep your proof of purchase for any warranty claims.