مقدمة
The Orbit 94884 Pocket Star Ultra 4 Station Automatic Indoor Sprinkler Timer is designed to provide efficient and automated control over your irrigation system. This timer features an intuitive Easy-Set Logic programming interface, a large, easy-to-read LCD display, and a convenient dial for quick adjustments. It supports up to 4 stations, allowing for flexible watering schedules tailored to your landscape needs.
تتضمن الميزات الرئيسية ما يلي:
- Simple toolless 'push-in' terminals for easy wire connections.
- Large, clear LCD display, control dial, and user-friendly buttons.
- Flexible watering times from 1 to 240 minutes per station.
- Up to 8 start times per day for comprehensive scheduling.
- Integrated budgeting feature for water conservation.
الشكل 1: الجبهة view of the Orbit 94884 Pocket Star Ultra Sprinkler Timer, showing the LCD display, control buttons, and programming dial.
معلومات السلامة
Please read and understand all safety instructions before installing or operating the sprinkler timer. Failure to follow these instructions may result in electric shock, fire, or property damage.
- This timer is designed for للاستخدام الداخلي فقط. Do not install it outdoors or in areas exposed to rain or direct moisture.
- تأكد من فصل مصدر الطاقة قبل القيام بأي أعمال توصيل أو صيانة.
- All electrical connections must comply with local codes and regulations. If unsure, consult a qualified electrician.
- Do not attempt to repair or modify the timer. Refer all servicing to qualified personnel.
- Keep the timer away from children and pets.
يثبت
1. تركيب المؤقت
- Choose a suitable indoor location near a standard electrical outlet, protected from direct sunlight and extreme temperatures.
- Use the two keyhole slots on the back of the timer as a template to mark the mounting screw locations on the wall.
- Install two screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed.
- Hang the timer on the screws, then slide it down to secure it.
2. Wiring the Sprinkler Valves
The Orbit 94884 features convenient toolless 'push-in' terminals for easy and secure wire connections. Ensure power is disconnected before wiring.
الشكل 2: داخلي view of the Orbit 94884 Sprinkler Timer showing the wiring terminals for sprinkler valves, common wire, and sensor.
- Locate the wiring compartment at the bottom of the timer.
- Each sprinkler valve has two wires. Connect one wire from each valve to the common (COM) terminal. The common terminal is typically labeled and may be a different color (e.g., white or blue).
- Connect the remaining wire from each valve to its corresponding station terminal (1, 2, 3, 4). For example, connect the wire for Zone 1 to terminal 1, Zone 2 to terminal 2, and so on.
- If you have a pump start relay or master valve, connect one wire from it to the "PUMP" or "MV" terminal (if available, otherwise use a standard station terminal if configured as such). Connect the other wire to the common (COM) terminal.
- To insert a wire, simply push it firmly into the designated terminal opening until it clicks into place. To remove, press the small tab next to the terminal and pull the wire out.
3. توصيل الطاقة
Plug the timer's power cord into a standard 230V AC electrical outlet. The LCD display should illuminate, indicating power is supplied.
تعليمات التشغيل
The Orbit 94884 uses an Easy-Set Logic dial and intuitive buttons for programming.
1. Setting Current Time and Date
- أدر القرص إلى التاريخ/الساعة.
- استخدم + و - buttons to set the current year, then press يدخل.
- Repeat for month, day, hour, and minute. Ensure AM/PM is correct.
- أدر القرص إلى آلي عندما انتهيت.
2. Setting Start Times
The timer allows up to 8 start times per program (A or B).
- أدر القرص إلى وقت البدء.
- The display will show "1st START". Use + و - to set the desired start time. Press يدخل.
- Continue setting additional start times (2nd, 3rd, etc.) as needed. To clear a start time, use + or - until "OFF" appears, then press يدخل.
- أدر القرص إلى آلي عندما انتهيت.
3. Setting Run Times (Station Durations)
This sets how long each station will water when activated.
- أدر القرص إلى مدة العرض.
- The display will show "STATION 1". Use + و - to set the watering duration (1-240 minutes). Press يدخل.
- اضغط على السهم لليمين button to move to the next station (STATION 2, 3, 4) and set its run time.
- أدر القرص إلى آلي عندما انتهيت.
4. Setting How Often to Water (Watering Days)
You can choose specific days of the week or an interval schedule.
- أدر القرص إلى عدد المرات.
- استخدم السهم لليمين or السهم لليسار buttons to select the desired watering days.
- To select specific days: The day of the week will flash. Press يدخل to select or deselect the day. Move to the next day using the السهم لليمين زر.
- To select interval watering: Continue pressing السهم لليمين until "INTERVAL" appears. Use + و - to set the interval (e.g., every 2 days).
- أدر القرص إلى آلي عندما انتهيت.
5. التشغيل اليدوي
To manually water a station or all stations:
- اضغط على يدوي زر.
- استخدم السهم لليمين or السهم لليسار buttons to select the desired station to water, or select "ALL" to water all stations sequentially.
- يضعط يدخل to start manual watering. The display will show the remaining time.
- لإيقاف الري اليدوي، اضغط واضح or turn the dial to عن ومن ثم العودة إلى آلي.
6. تأخير بسبب المطر
To temporarily suspend watering for a period due to rain or other reasons:
- اضغط على تأخير بسبب المطر زر.
- استخدم + و - buttons to select the number of days for the delay (24, 48, or 72 hours).
- The timer will automatically resume its schedule after the delay period expires. To cancel the rain delay, press تأخير بسبب المطر مرة أخرى.
7. Seasonal Adjust / Budgeting
This feature allows you to adjust all station run times by a percentage without reprogramming each station individually.
- أدر القرص إلى ميزانية.
- استخدم + و - buttons to set the desired percentage (e.g., 50% for half the watering time, 120% for 20% more).
- أدر القرص إلى آلي عندما انتهيت.
صيانة
- تنظيف: Wipe the timer's exterior with a soft, damp القماش. لا تستخدم المنظفات أو المذيبات الكاشطة.
- القوة Outage: The timer has a built-in memory to retain programming during power outages. However, the clock may need to be reset if the outage ممتدة.
- فصل الشتاء: As this is an indoor timer, specific winterization for the unit itself is not required. However, ensure that any connected outdoor irrigation components (valves, pipes) are properly drained and winterized according to their respective manuals to prevent freeze damage.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| العرض فارغ. | لا يوجد تيار كهربائي في المؤقت. | Check if the power cord is securely plugged into a working outlet. Verify the outlet has power. |
| Sprinklers do not turn on. |
|
|
| Timer waters at wrong times. | Incorrect clock/date or program settings. | Review and adjust the current time, date, start times, run times, and watering days as per the "Operating Instructions" section. |
| Only some stations water. | Wiring issue for specific stations or faulty valve. | Check wiring for the non-working stations. Test the solenoid on the non-working valve. |
تحديد
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | 94884 |
| عدد المحطات | 4 |
| مصدر الطاقة | التيار المتردد |
| مادة | بلاستيك |
| أبعاد المنتج | 15.5 x 6.5 x 23.5 cm (6.1 x 2.5 x 9.2 inches) |
| وزن العنصر | 0.7 كيلوغرامًا (1.54 رطلاً) |
| الشركة المصنعة | Orbit Europe |
| رمز المنتج الموحد | 046878948846 |
الضمان والدعم
Orbit products are manufactured to high quality standards and are backed by a limited warranty. For specific warranty details, terms, and conditions, please refer to the warranty card included with your product or visit the official Orbit webموقع.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Orbit customer support. Contact information can typically be found on the product packaging or the manufacturer's official webموقع:
