1. المقدمة
The Donner Dark Mouse Distortion Pedal is an effect unit designed for electric guitar, providing a range of distortion tones. It features two distinct distortion modes and a true bypass design to maintain signal integrity when the effect is disengaged. This manual provides essential information for setting up, operating, and maintaining your pedal.

Figure 1: The Donner Dark Mouse Distortion Pedal, designed to deliver classic distortion sounds.
2. انتهى المنتجview
The Dark Mouse pedal features intuitive controls for shaping your sound. Understanding these controls is key to utilizing the pedal's full potential.

Figure 2: Control layout of the Dark Mouse Distortion Pedal.
عناصر التحكم:
- 1. DC 9V Jack: مدخل الطاقة لمحول تيار مستمر 9 فولت (القطب السالب في المنتصف).
- 2. Mode Switch (CLASSIC/HYPER): Toggles between two distinct distortion characteristics.
- 3. LEVEL Knob: يضبط مستوى الصوت الإجمالي للتأثير.
- 4. FILTER Knob: Controls the tone or brightness of the distortion. Turning clockwise increases treble.
- 5. DIST Knob: Adjusts the amount of distortion or gain.
- 6. Input Jack: Connect your guitar or previous effect pedal here.
- 7. Output Jack: الاتصال بجهازك amplifier or next effect pedal.
- 8. مؤشر LED: يضيء عند تفعيل التأثير.
- 9. مفتاح القدم: Engages or disengages the effect.
3. الإعداد
Follow these steps to connect your Donner Dark Mouse Distortion Pedal:
- تأكد من ampيجب إيقاف تشغيل مكبر الصوت قبل إجراء أي اتصالات.
- قم بتوصيل غيتارك الكهربائي بـ مدخل جاك (6) of the pedal using a standard 1/4-inch instrument cable.
- قم بتوصيل إخراج جاك (7) من الدواسة إلى ampمدخل مكبر الصوت باستخدام كابل آلة قياسي آخر مقاس 1/4 بوصة.
- Connect a 9V DC power adapter (center negative, 500mA minimum) to the مقبس تيار مستمر 9 فولت (1). Note: The power supply is not included. Using an incorrect power supply may damage the pedal.
- Once all connections are secure, you may turn on your ampمكبر.

Figure 3: Proper connection of the pedal to power and instrument cables.
4. تعليمات التشغيل
The Dark Mouse pedal offers two distinct distortion modes and flexible controls to tailor your sound.
إشراك التأثير:
اضغط على التبديل القدم (9) to toggle the effect on or off. The مؤشر LED (8) will illuminate when the effect is active.
Selecting Distortion Modes:
استخدم مفتاح الوضع (2) to select between the two distortion modes:
- كلاسيكي: ينتج النبيذ الدافئtage distortion sound with a subtle fuzz characteristic.
- HYPER: Offers a more powerful and aggressive sound with enhanced edges and low-end response.

Figure 4: The mode switch allows selection between Classic and Hyper distortion.
Adjusting Tone and Gain:
Utilize the three control knobs to fine-tune your distortion sound:
- LEVEL Knob (3): Adjust this to set the overall output volume of the pedal. Start with it at a moderate level and adjust to match your bypassed signal volume.
- DIST Knob (5): Turn this knob clockwise to increase the amount of distortion, from subtle crunch to heavy saturation.
- FILTER Knob (4): This control acts as a tone shaping filter. Turning it clockwise will increase the brightness and treble content of the distortion, while turning it counter-clockwise will result in a darker tone.

Figure 5: The Level, Dist, and Filter knobs provide flexible control over the effect.
التجاوز الحقيقي:
The pedal features true bypass circuitry. This means that when the effect is disengaged, your guitar signal passes directly through the pedal without any electronic interference, preserving your original tone. The LED indicator will be off when in true bypass mode.

Figure 6: True bypass ensures a clean signal when the effect is off.
5. الصيانة
- تنظيف: Use a soft, dry cloth to clean the pedal's exterior. Avoid using abrasive cleaners or solvents.
- تخزين: قم بتخزين الدواسة في بيئة جافة، بعيدًا عن درجات الحرارة القصوى وأشعة الشمس المباشرة.
- مزود الطاقة: Always use a 9V DC center-negative power adapter with a minimum of 500mA current. Disconnect the power supply when the pedal is not in use for extended periods.
- الرعاية الجسدية: The pedal features a durable aluminum alloy casing. Avoid dropping the pedal or subjecting it to excessive force.
6. استكشاف الأخطاء وإصلاحها
- لا يوجد صوت:
- تحقق من جميع توصيلات الكابلات (الغيتار إلى المدخل، والمخرج إلى amp).
- Ensure the power adapter is correctly connected and providing power.
- تأكد من أن جيتارك و ampمكبرات الصوت تعمل بشكل صحيح.
- If the LED is off, press the footswitch to engage the effect.
- Weak or Distorted Sound (when bypassed):
- This pedal features true bypass, so a weak or distorted bypassed signal usually indicates an issue with cables or other equipment in your signal chain, not the pedal itself.
- ضوضاء/طنين غير مرغوب فيه:
- Ensure you are using a regulated 9V DC center-negative power supply. Unregulated power supplies can introduce noise.
- تحقق من وجود كابلات تالفة.
- Move the pedal away from power transformers or other electronic devices that may cause interference.
7. المواصفات
| ميزة | مواصفة |
|---|---|
| رقم الموديل | EC1178-FBA-US |
| وزن العنصر | 8.8 أونصة (0.25 كجم) |
| أبعاد المنتج | 3.7 × 1.69 × 2.01 بوصة (3.7 بوصة طول × 1.7 بوصة عرض × 2 بوصة ارتفاع) |
| مادة الجسم | سبائك الألومنيوم |
| مصدر الطاقة | محول كهربائي |
| المجلدtage | 9 فولت تيار مستمر (القطب السالب في المنتصف) |
| نوع الموصل | 1/4" (6.35mm) mono jack |
| تنسيق الإشارة | التناظرية |
8. ماذا يوجد في الصندوق
- 1 x Donner Dark Mouse pedal
9. الضمان والدعم
For warranty information or technical support, please refer to the official Donner webيمكنك زيارة الموقع الإلكتروني أو الاتصال بخدمة عملاء دونر مباشرةً. احتفظ بإيصال الشراء لتقديم مطالبات الضمان.





