قفل LOCINOX SNA60002 مع أسطوانة LCKX40 للأبواب المربعة الاحترافية بأحجام 40-50-60 ممfileدليل التعليمات

1. المقدمة

This manual provides comprehensive instructions for the installation, operation, and maintenance of the LOCINOX SNA60002 lock with an LCKX40 cylinder. This lock is specifically designed for integration with square profiles measuring 40mm, 50mm, or 60mm. Please read these instructions carefully before installation and use to ensure proper function and longevity of your lock.

2. انتهى المنتجview

The LOCINOX SNA60002 is a robust lock system featuring an LCKX40 cylinder, engineered for secure gate and door applications. Its design allows for versatile installation on various square profile الأحجام.

المميزات الرئيسية:

• Integrated LCKX40 cylinder for reliable key operation.
• Compatible with 40mm, 50mm, and 60mm square profiles.
• هيكل متين لأداء طويل الأمد.

الشكل 1: The LOCINOX SNA60002 lock assembly, showing the main body, handle, cylinder, and accompanying keys. The lock features a silver finish and is designed for secure gate applications.

3. الإعداد والتثبيت

Proper installation is crucial for the optimal performance and security of your LOCINOX lock. Refer to the diagram below for precise measurements and component placement.

الأدوات المطلوبة (غير مدرجة):

• حفر
• Drill bits (21mm, 24mm, and appropriate size for mounting screws)
• شريط قياس أو مسطرة
• أداة الوسم
• مفك البراغي

خطوات التثبيت:

1. إعداد المحترفينfile: Ensure the square profile (40mm, 50mm, or 60mm) is clean and free of obstructions.
2. حدد نقاط الحفر: Using the provided diagram (Figure 2) as a guide, mark the precise locations for drilling on your square profile.
   • Drill two holes with a diameter of 21 ملم for the main lock bolts.
   • Drill two holes with a diameter of 24 ملم for the cylinder and handle spindle.
   • Note the distances: 160mm between the top bolt and the bottom of the lock body, 90mm from the edge to the center of the cylinder, and 30mm for the backset.
3. ثقوب الحفر: Carefully drill the marked holes. Ensure they are clean and smooth.
4. أدخل جسم القفل: Position the main lock body into the prepared openings on the square profile.
5. إرفاق المكونات:
   • Insert the LCKX40 cylinder into its designated slot.
   • Attach the handle spindle and handle.
   • Secure the lock using the provided fasteners and threaded sleeves, ensuring all components are aligned and tightened appropriately.
6. عملية الاختبار: Before final tightening, test the lock mechanism with the key to ensure smooth operation of the latch and deadbolt. Adjust as necessary.

الشكل 2: انفجرت view and dimensional diagram for the LOCINOX SNA60002 lock installation. This illustration details the required drilling diameters (Ø21mm, Ø24mm) and key measurements (160mm, 90mm, 30mm) for mounting the lock onto a square profile.

4. تعليمات التشغيل

The LOCINOX SNA60002 lock operates using a standard key mechanism for locking and unlocking.

لقفل:

1. Ensure the gate/door is fully closed and the latch is engaged.
2. Insert the key into the LCKX40 cylinder.
3. Turn the key to extend the deadbolt into the strike plate.
4. Remove the key. The lock is now secured.

لإلغاء القفل:

1. Insert the key into the LCKX40 cylinder.
2. قم بتدوير المفتاح لسحب المزلاج.
3. Turn the handle to disengage the latch and open the gate/door.
4. إزالة المفتاح.

5. الصيانة

Regular maintenance ensures the smooth operation and extends the lifespan of your LOCINOX lock.

• تنظيف: Periodically clean the exterior of the lock with a soft, damp القماش. تجنب استخدام المنظفات الكاشطة أو المذيبات التي قد تؤدي إلى إتلاف الطبقة النهائية.
• تشحيم: Apply a small amount of graphite-based lubricant or a silicone-free lock lubricant into the keyway and moving parts of the latch and deadbolt mechanism once or twice a year. Do not use oil-based lubricants as they can attract dirt.
• تقتيش: Regularly inspect the lock for any signs of wear, damage, or loose components. Ensure all screws are tight.
• الرعاية الرئيسية: Avoid using bent or damaged keys, as this can harm the cylinder mechanism.

6. استكشاف الأخطاء وإصلاحها

If you encounter issues with your LOCINOX lock, refer to the following common problems and solutions:

• Key is difficult to turn or sticky:
  • Apply a small amount of graphite or silicone-free lock lubricant into the keyway.
  • Check if the key is bent or damaged; try a spare key.
• Latch or deadbolt does not retract/extend smoothly:
  • Check for obstructions in the strike plate or around the bolt.
  • Lubricate the moving parts of the latch and deadbolt.
  • Ensure the lock is properly aligned and mounted securely. Loose mounting screws can cause misalignment.
• Handle is loose:
  • Tighten the screws securing the handle to the lock body.

If problems persist after attempting these solutions, contact customer support or a qualified locksmith.

7. المواصفات

8. الضمان والدعم

For warranty information or technical support regarding your LOCINOX SNA60002 lock, please refer to the manufacturer's official website or contact your point of purchase. Keep your purchase receipt as proof of purchase.

Manufacturer: Locinox