مقدمة
Thank you for choosing the WilTec Outdoor Cat Enclosure. This manual provides essential information for the safe assembly, operation, and maintenance of your new cat enclosure. Please read these instructions carefully before assembly and retain them for future reference.
تعليمات السلامة
- تأكد من وجود جميع المكونات وسلامتها قبل التجميع. لا تتابع عملية التجميع إذا كانت أي من الأجزاء مفقودة أو مكسورة.
- Assembly should be performed by at least two adults to ensure safety and ease of construction.
- Wear appropriate safety gear, such as gloves, during assembly to prevent injuries.
- Place the enclosure on a level, stable surface to prevent tipping.
- Regularly inspect the enclosure for any signs of wear, damage, or loose components. Tighten screws and replace damaged parts as necessary.
- احتفظ بالأطفال والحيوانات الأليفة بعيدًا عن منطقة التجمع لتجنب الحوادث.
- This enclosure is designed for outdoor use only.
- لا تقم بتعديل المنتج بأي شكل من الأشكال، لأن ذلك قد يضر بسلامته الهيكلية وسلامته.
محتويات الحزمة
يرجى التأكد من تضمين جميع المكونات التالية في الحزمة الخاصة بك:
- Pre-drilled fir wood panels and frames
- ألواح شبكية من الفولاذ المجلفن
- Bitumen roof sections
- Resting platforms (6 units)
- Lockable door assembly
- Hardware kit (screws, bolts, hinges, latches)
- دليل تعليمات التجميع
If any parts are missing or damaged, please contact WilTec customer support immediately.
الإعداد والتجميع
The WilTec Outdoor Cat Enclosure is designed for straightforward assembly with pre-drilled holes. Follow these steps carefully:
- فك وتنظيم: Carefully unpack all components and lay them out on a clean, flat surface. Group similar parts together.
- تجميع الإطار الأساسي: Connect the base frame sections using the provided hardware. Ensure all connections are secure.
- تثبيت الألواح الجانبية: Secure the side panels, which include the galvanized steel mesh, to the base frame.
- Install Resting Platforms: Attach the six resting platforms at various heights as indicated in the detailed assembly diagram (refer to the separate diagram sheet if provided).
- Mount Door: Install the door frame and attach the lockable door using the hinges and latch mechanism. Test the locking function.
- Secure Roof: Place and secure the bitumen roof sections onto the top frame. Ensure the roof is properly aligned to provide maximum weather protection.
- التفتيش النهائي: Double-check all screws and connections to ensure they are tight and secure. Verify the stability of the entire structure.
Image 1: Fully assembled WilTec Outdoor Cat Enclosure XXL. This image shows the complete structure of the cat enclosure, highlighting its wooden frame, wire mesh, and green bitumen roof.
الصورة 2: الداخلية view of the cat enclosure showing multiple resting platforms. This image provides a clear view of the six internal platforms designed for cats to rest and observe.
Image 3: Close-up of the lockable door and galvanized latch. This image details the secure locking mechanism on the enclosure's access door.
تعليمات التشغيل
This enclosure provides a safe and stimulating outdoor environment for your cats.
- الموقع: Position the enclosure in a shaded or partially shaded area to protect your cats from direct sunlight during hot weather. Ensure it is on a stable, level surface.
- Introducing Cats: Allow your cats to explore the enclosure at their own pace. You may place familiar bedding, toys, or treats inside to encourage them.
- وصول: Use the lockable door for easy access to your cats and for cleaning the enclosure. Always ensure the door is securely latched when cats are inside.
- الإشراف: While the enclosure is secure, it is recommended to supervise your cats, especially during their initial uses.
- الإثراء: Utilize the multiple resting platforms to provide varied vantage points and opportunities for climbing and relaxation. Consider adding additional cat-safe enrichment items.
Image 4: Cat enclosure in a garden with cats enjoying the space. This image illustrates the enclosure in an outdoor setting, with cats comfortably using the platforms.
صيانة
Regular maintenance will extend the lifespan of your WilTec Cat Enclosure.
- تنظيف: Regularly clean the enclosure, including the platforms and mesh, using pet-safe cleaning solutions. Remove any debris or waste promptly.
- العناية بالخشب: The fir wood is treated with a waterproof varnish. To maintain its weather resistance, periodically reapply a suitable non-toxic wood sealant or varnish, especially if the wood shows signs of wear or fading.
- فحص الشبكة: Check the galvanized steel mesh for any signs of damage, rust, or sharp edges that could harm your pets. Repair or replace damaged sections immediately.
- فحص السقف: Inspect the bitumen roof for tears, cracks, or lifting sections. Ensure it remains watertight to protect the interior from rain and snow.
- فحص الأجهزة: Periodically check all screws, bolts, hinges, and latches for tightness. Tighten any loose hardware to maintain structural integrity.
Image 5: Close-up of the bitumen roof showing water resistance. This image highlights the protective bitumen layer on the roof, designed to repel water.
Image 6: Fir wood logs and the cat enclosure, emphasizing material quality. This image visually represents the high-quality fir wood used in the construction of the enclosure.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| يبدو الغلاف غير مستقر أو متذبذب. | أدوات تثبيت مفكوكة؛ أرض غير مستوية. | Tighten all screws and bolts. Relocate the enclosure to a level surface or use shims to stabilize. |
| الباب لا يُغلق أو يُقفل بشكل صحيح. | مفصلات غير محاذية؛ مزلاج معوج؛ عائق. | Check hinge alignment and adjust if necessary. Ensure the latch mechanism is clear of debris and not bent. |
| تسرب المياه من السقف. | Damaged bitumen roof; improper installation. | Inspect the bitumen roof for tears or gaps. Seal any small cracks with appropriate roofing sealant. Ensure roof sections are correctly overlapped and secured. |
| Cats are not using the enclosure. | Unfamiliarity; lack of comfort items. | Place familiar bedding, toys, or treats inside. Allow cats to explore at their own pace. Ensure the enclosure is in a quiet, safe location. |
تحديد
- ماركة: ويلتيك
- نموذج: XXL Cat Enclosure
- مادة: Fir wood, Bitumen, Galvanized steel
- لون: بني
- الأبعاد الكلية (الطول × العرض × الارتفاع): 180 سم × 88 سم × 169 سم
- شكل: مستطيل
- Resting Platforms: 6 وحدة
- الاستخدام: في الهواء الطلق
- التجميع مطلوب: نعم
الضمان والدعم
For warranty information, technical support, or to order replacement parts, please contact the seller or WilTec customer service directly. Please have your purchase receipt and product model information ready when contacting support.
يمكنك زيارة متجر علامة ويلتك التجارية لمزيد من المعلومات.
