1. المقدمة
This manual provides essential information for the safe and efficient operation of your Behringer NX6000D Power Amplifier. Please read it thoroughly before use and retain it for future reference. The NX6000D is a high-performance, ultra-lightweight 6000-Watt Class-D power amplifier with integrated DSP and 24-bit/96 kHz converters, designed for professional audio applications.
2. تعليمات السلامة الهامة
- مصدر الطاقة: Connect the unit only to an AC power outlet of the correct voltage as specified on the rear panel.
- تهوية: تأكد من التهوية الكافية. لا تسد فتحات التهوية.
- الماء والرطوبة: Do not expose this appliance to rain or moisture. Do not place objects filled with liquids on the apparatus.
- الخدمة: يُرجى إحالة جميع أعمال الصيانة إلى فنيين مؤهلين. لا تحاول صيانة هذا المنتج بنفسك.
- الكابلات: Use only high-quality, shielded cables for all audio connections to prevent interference.
- التأريض: يجب أن يكون هذا المنتج مؤرضًا.
- تنظيف: نظف فقط بقطعة قماش جافة.
3. دليل الإعداد
3.1 فك العبوة والتفتيش
قم بإخراج محتويات العبوة بعناية amplifier and inspect it for any signs of damage during transit. If damage is found, contact your dealer immediately.
3.2 التنسيب
The NX6000D is designed for rack mounting. Ensure sufficient space around the unit for proper airflow. Avoid placing it near heat sources or in direct sunlight.
3.3 الاتصالات
- توصيل الطاقة: قم بتوصيل سلك الطاقة المرفق بـ amplifier's power inlet and then to a suitable grounded power outlet.
- توصيلات الإدخال: Use balanced XLR or 1/4" TRS cables to connect your audio source (mixer, preamplifier) to the INPUT A and INPUT B jacks on the rear panel.
- اتصالات الإخراج: Connect your loudspeakers to the SPEAKON output connectors (OUTPUT A and OUTPUT B) on the rear panel. Ensure correct polarity and impedance matching. The amplifier supports 4-ohm and 8-ohm loads.
Figure 1: Front panel of the Behringer NX6000D Power Amplifier, showing controls and display.
الشكل 2: بزاوية view من Behringer NX6000D Power Amplifier, highlighting its compact design.
4. تعليمات التشغيل
4.1 تشغيل/إيقاف التشغيل
Press the POWER button on the front panel to turn the unit on. The display will illuminate. To power off, press the POWER button again.
4.2 ضوابط اللوحة الأمامية
- Level Controls (CH A, CH B): Adjust the output level for each channel.
- SIGNAL/LIMIT/PROTECT LEDs: Indicate signal presence, limiting activity, and protection mode.
- شاشة LCD: Shows current settings, DSP parameters, and status.
- زر الإعداد: Accesses the main setup menu.
- PROCESS Button: Accesses DSP processing parameters.
- مقبض التشفير: Navigates menus and adjusts parameter values.
- زر الخروج: Returns to the previous menu or main screen.
4.3 DSP Functionality
The integrated DSP allows for advanced audio processing. Press the PROCESS button to enter the DSP menu. Here you can configure:
- تأخير: Adjust signal delay for speaker alignment.
- عبور: Set crossover frequencies and filter types (e.g., Butterworth, Linkwitz-Riley, Bessel) up to 48 dB/octave.
- EQ: Utilize 8 parametric and 2 dynamic equalizer bands for precise frequency shaping.
- معالجة الديناميكيات: Apply compression or limiting to control dynamic range.
- إعدادات الأمان: Lock settings to prevent unauthorized changes.
Use the Encoder Knob to navigate and adjust parameters. Press the Encoder Knob to confirm selections. Refer to the full digital manual (available on the Behringer website) for detailed DSP operation.
5. الصيانة
- تنظيف: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- تهوية: تأكد بانتظام من خلو فتحات التهوية من الغبار والحطام.
- وصلات الكابلات: قم بفحص جميع توصيلات الكابلات بشكل دوري للتأكد من تثبيتها بإحكام وعدم وجود علامات تآكل.
- تخزين: If storing the unit for an extended period, ensure it is in a dry, dust-free environment.
6. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يوجد طاقة | Power cord disconnected; faulty outlet; internal fuse. | Check power cord connection; try a different outlet; contact service if fuse is suspected. |
| لا يوجد مخرج صوت | Input/output cables incorrect; level controls too low; protection mode active. | Verify all cable connections; increase level controls; check PROTECT LED (if lit, power cycle unit). |
| صوت مشوه | Input signal too high; speaker impedance mismatch; faulty speaker. | Reduce input signal level; verify speaker impedance matches amplifier; test with different speakers. |
| وحدة يسخن | Blocked ventilation; excessive load. | Ensure clear airflow around the unit; reduce output level or load. |
7. المواصفات الفنية
- طاقة الإخراج: 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms
- وزن: Less than 13.2 lbs / 6.0 kg
- الأبعاد (الارتفاع × العرض × العمق): حوالي 3.7 × 19.02 × 12.44 بوصة (94 × 483 × 316 ملم)
- معالج الإشارة الرقمية: High-performance DSP with 24-bit/96 kHz converters
- مميزات DSP: Delay, Crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), Dynamics Processing
- موصلات الإدخال: 2 x XLR/TRS combo jacks
- موصلات الإخراج: 2 x SpeakON connectors
- مزود الطاقة: Ultra-efficient switch-mode power supply
- تبريد: Revolutionary cool-running high-density Class-D technology
- مادة: معدن
- لون: أسود
8. الضمان والدعم
For detailed warranty information, please refer to the Behringer warranty program available on their official website. Behringer products are typically covered by a limited warranty against defects in materials and workmanship.
8.1 الدعم الفني
If you encounter issues not covered in the troubleshooting section or require further assistance, please visit the official Behringer support website or contact their customer service. You may need your product's serial number for support inquiries.
موقع بيرينجر الرسمي Webموقع: www.behringer.com
