lightmaXX LIG0015674-000

دليل استخدام مصباح LightmaXX Nano UV Bar LED

Model: LIG0015674-000

1. المقدمة

شكرا لك على الشراءasing the LightmaXX Nano UV Bar LED. This product is designed to produce a black light effect, ideal for stage lighting, parties, and special events. It features 12 powerful 3W UV LEDs, providing a total output of 36W. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.

LightmaXX Nano UV Bar LED, front view, emitting purple UV light

الشكل 1: الجبهة view of the LightmaXX Nano UV Bar LED, showcasing its 12 illuminated UV LEDs.

2. تعليمات السلامة

التزم دائمًا باحتياطات السلامة التالية لمنع الصدمات الكهربائية أو الحرائق أو الإصابات:

3. محتويات العبوة

Please check the package contents upon unpacking. If any items are missing or damaged, contact your retailer immediately.

4. الإعداد

Follow these steps to set up your LightmaXX Nano UV Bar LED:

  1. فك التعبئة: Carefully remove the UV bar and all accessories from the packaging.
  2. تركيب أقواس التثبيت: The UV bar comes with two adjustable mounting brackets. Attach these to the sides of the bar using the provided screws. Ensure they are securely fastened. These brackets allow for flexible positioning on a flat surface or for suspension.
  3. جانب view of LightmaXX Nano UV Bar LED showing the mounting bracket attachment point

    الشكل 2: الجانب view illustrating the attachment of the mounting bracket to the UV bar.

  4. التمركز: Place the UV bar on a stable, flat surface or mount it securely to a truss or ceiling using appropriate clamps (not included). Ensure the area is well-ventilated and free from obstructions.
  5. توصيل الطاقة: Connect the power cable to the power input on the back of the UV bar. Ensure the connection is firm.
  6. مؤخرة view of LightmaXX Nano UV Bar LED with power cord connected

    الشكل 3: خلفي view of the UV bar showing the power cable connected to the unit.

  7. تشغيل: Plug the power cable into a suitable electrical outlet (230V AC). The unit is now ready for operation.

5. التشغيل

The LightmaXX Nano UV Bar LED is designed for simple operation.

  1. مفتاح التشغيل: Locate the in-line ON/OFF switch on the power cable.
  2. LightmaXX Nano UV Bar LED with power cord and in-line switch

    Figure 4: The UV bar with its power cable, highlighting the in-line ON/OFF switch.

    Close-up of the in-line ON/OFF switch on the power cable

    الشكل 5: تفصيلي view of the in-line ON/OFF switch for controlling the power.

  3. تشغيل: Flip the switch to the 'ON' position. The UV LEDs will illuminate, producing the black light effect.
  4. إيقاف التشغيل: Flip the switch to the 'OFF' position to turn off the UV bar. For complete power disconnection, unplug the device from the wall outlet.

6. الصيانة

Regular maintenance ensures the longevity and optimal performance of your UV bar.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your LightmaXX Nano UV Bar LED, refer to the following table for common problems and solutions:

مشكلةالسبب المحتملحل
لا يوجد خرج ضوءلا يوجد مصدر للطاقة
In-line switch is OFF
كابل طاقة تالف
Check if the power cable is securely plugged into the outlet and the unit.
Ensure the in-line switch is in the 'ON' position.
Inspect the power cable for damage. If damaged, replace it.
مصابيح LED الوامضةمصدر طاقة غير مستقر
اتصال فضفاض
Try plugging the unit into a different power outlet.
تأكد من أن جميع توصيلات الكابلات آمنة.
الوحدة تشعر بالسخونةتهوية سيئة
الاستخدام المطول
Ensure adequate space around the unit for airflow. Do not block ventilation openings.
This is normal during operation, but ensure it's not excessively hot. If so, disconnect and allow to cool.

إذا استمرت المشكلة بعد تجربة هذه الحلول، فيرجى الاتصال بدعم العملاء.

8. المواصفات

ميزةالتفاصيل
ماركةلايت ماكس
رقم الموديلLIG0015674-000
الأبعاد (الطول × العرض × الارتفاع)64 x 8.5 x 6.5 cm (25.2 x 3.3 x 2.6 inches)
وزن1.07 كجم (2.36 رطل)
لونLilac (housing appears black/grey)
مادةبلاستيك
عدد المصابيح LED12
نوع الصمامUV Light Emitting Diode (LED)
طاقة الصمام3 وات لكل LED
إجمالي انتاج الطاقة36 واط
المجلدtage230 فولت (تيار متردد)
مصدر الطاقةكابل الطاقة
نوع التثبيتRear Mount (with included brackets)

9. الضمان والدعم

LightmaXX is committed to customer satisfaction. Your LightmaXX Nano UV Bar LED comes with the following:

For warranty claims or technical support, please refer to your purchase documentation or visit the official LightmaXX/Music Store webموقع لمعلومات الاتصال.

المستندات ذات الصلة - LIG0015674-000

قبلview دليل مستخدم LightmaXX LED NANO PAR
دليل المستخدم لجهاز LightmaXX LED NANO PAR، والذي يغطي تعليمات السلامة، والتركيب، وأوضاع التشغيل (DMX، Static، Auto، Sound)، والاتصالات، وبنية القائمة، والمواصفات، واستكشاف الأخطاء وإصلاحها، والتنظيف، والحماية البيئية.
قبلview دليل المستخدم وتعليمات السلامة لبرنامج lightmaXX Vector Fog 2.5
دليل مستخدم شامل لجهاز الضباب lightmaXX Vector Fog 2.5، يشمل تعليمات السلامة، والتركيب، والتشغيل، والمواصفات، واستكشاف الأخطاء وإصلاحها. يتضمن تفاصيل حول DMX والتحكم عن بُعد.
قبلview دليل المستخدم والمواصفات لسلسلة LightmaXX VEGA Silent PAR
دليل مستخدم شامل ومواصفات فنية لتأثيرات إضاءة LED من سلسلة LightmaXX VEGA Silent PAR، يغطي الإعداد والتشغيل والسلامة واستكشاف الأخطاء وإصلاحها. يتضمن تفاصيل الطراز وأنماط DMX وإرشادات التثبيت.
قبلview دليل مستخدم lightmaXX Cannon Shot FX FOUR
دليل المستخدم الشامل لآلة صنع القصاصات الورقية lightmaXX Cannon Shot FX FOUR، يغطي تعليمات السلامة، والتركيب، والتشغيل، وأوضاع DMX والتحكم عن بعد، واستكشاف الأخطاء وإصلاحها، والاعتبارات البيئية.
قبلview دليل مستخدم LightmaXX Pro Spot ARC RGBW
دليل المستخدم لمؤثر الإضاءة LightmaXX Pro Spot ARC RGBW LED، يوضح تعليمات السلامة والتركيب والتشغيل والتحكم DMX والمواصفات واستكشاف الأخطاء وإصلاحها.
قبلview دليل المستخدم ودليل السلامة لجهاز lightmaXX Cannon Shot FX FOUR
دليل مستخدم شامل لآلة صنع القصاصات الورقية lightmaXX Cannon Shot FX FOUR. يتضمن تعليمات سلامة مفصلة، ​​ودليلي تركيب وتشغيل، وإعدادات DMX والتحكم عن بُعد، ونصائح لاستكشاف الأخطاء وإصلاحها، والمواصفات، ومعلومات عن حماية البيئة.