ZKTeco BS-52O12K

ZKTeco Security Surveillance IP Bullet Camera BS-52O12K User Manual

Model: BS-52O12K

1. المقدمة وما فوقview

The ZKTeco BS-52O12K is a high-performance 2.0 Megapixel IP bullet camera designed for security surveillance. It features H.265 real-time coding for efficient video compression, 3D DNR (Digital Noise Reduction), and DWDR (Digital Wide Dynamic Range) for clear images in various lighting conditions. Equipped with an IR-Cut filter, it provides effective day and night vision capabilities. The camera supports PoE (Power over Ethernet) for simplified installation and offers lightning protection up to 6KV. Its IP67 ingress protection rating ensures durability in outdoor environments. Remote monitoring is supported via iOS/Android Phone/Pad applications, and it can be linked with Access Control Systems like BioSecurity 3.0.

أمام view of ZKTeco BS-52O12K IP Bullet Camera

الشكل 1.1: الجبهة view of the ZKTeco BS-52O12K IP Bullet Camera, showing the lens and IR illuminators.

2. مواصفات المنتج

3. محتويات العبوة

Upon opening the package, please verify that all components are present and in good condition. The standard package for the ZKTeco BS-52O12K IP Bullet Camera typically includes:

ZKTeco BS-52O12K camera, packaging box, and small accessories

Figure 3.1: Contents of the ZKTeco BS-52O12K package, including the camera, box, and small installation accessories.

4. دليل الإعداد

4.1 التثبيت المادي

  1. اختر الموقع: Select a suitable location for the camera, considering the desired surveillance area, power access (if not using PoE), and network connectivity. The camera is rated IP67 for outdoor use.
  2. التركيب:
    • Mark the drilling points on the wall or ceiling using the camera's mounting base as a template.
    • قم بثقب الثقوب وأدخل سدادات الحائط المرفقة.
    • قم بتثبيت قاعدة تثبيت الكاميرا على السطح باستخدام البراغي المرفقة.
    • اضبط زاوية الكاميرا حسب الحاجة.
  3. اتصال سلكي:
    • Connect an Ethernet cable to the camera's RJ45 port. If using PoE, this single cable provides both power and data.
    • في حالة عدم استخدام تقنية PoE، قم بتوصيل محول طاقة تيار مستمر 12 فولت (غير مرفق) بمدخل الطاقة الخاص بالكاميرا.
    • Use the waterproof connector for the Ethernet cable, especially for outdoor installations, to protect against moisture.
جانب view of ZKTeco BS-52O12K IP Bullet Camera with mounting base

الشكل 4.1: الجانب view of the ZKTeco BS-52O12K camera, illustrating its mounting base and cable connections.

4.2 Network and Software Setup

  1. الاتصال بالشبكة: Connect the other end of the Ethernet cable to a PoE switch/NVR or a standard network switch/router (if using a separate power adapter).
  2. تكوين عنوان IP:
    • The camera typically obtains an IP address automatically via DHCP.
    • For initial setup or if DHCP is not available, use the ZKTeco IP Search Tool (available on the ZKTeco website) to discover the camera's IP address on your network.
    • You may need to set a static IP address for the camera for consistent access. Refer to the software manual for detailed steps.
  3. الوصول إلى الكاميرا:
    • افتح web قم بتشغيل المتصفح (مثل Chrome أو Firefox) وأدخل عنوان IP الخاص بالكاميرا في شريط العناوين.
    • Log in using the default username and password (refer to the quick start guide or ZKTeco documentation for default credentials, typically admin/admin or admin/12345).
    • Important: Change the default password immediately after the first login for security purposes.
  4. تثبيت البرنامج:
    • Download and install the ZKTeco client software (e.g., ZKBioSecurity 3.0 or other compatible VMS) on your PC for advanced management and recording.
    • For mobile access, download the official ZKTeco mobile application from your device's app store (iOS/Android).

5. تعليمات التشغيل

5.1 مباشر View والتسجيل

5.2 Day/Night Vision

The camera automatically switches between day (color) and night (black and white, IR-illuminated) modes based on ambient light conditions. The IR-Cut filter ensures accurate color reproduction during the day and enhanced night vision in low-light or no-light environments.

أبدا الإعدادات المتقدمة

من خلال web interface or client software, users can configure advanced settings such as:

6. الصيانة

7. استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
لا يوجد طاقة / الكاميرا لا تعمل
  • No power from PoE switch/injector.
  • Faulty power adapter (if not using PoE).
  • Damaged Ethernet cable.
  • Verify PoE switch/injector is powered on and functioning.
  • Test power adapter with another device or replace.
  • Check Ethernet cable for damage; try a different cable.
No Image / Offline in Software
  • Network connectivity issue.
  • عنوان IP أو إعدادات الشبكة غير صحيحة.
  • Firewall blocking communication.
  • التحقق من اتصال كابل الشبكة.
  • Ensure camera and viewing device are on the same network segment.
  • Use IP Search Tool to find camera's IP.
  • Temporarily disable firewall to test.
ضعف جودة الصورة
  • عدسة قذرة.
  • إضاءة غير كافية.
  • Incorrect image settings.
  • تنظيف عدسة الكاميرا.
  • Ensure adequate lighting or verify IR illuminators are active at night.
  • Adjust brightness, contrast, and other image settings in the web interface/software.
لا يمكن الوصول إلى الكاميرا عبر Web المتصفح
  • Incorrect IP address.
  • Browser compatibility issues.
  • Default password not changed or forgotten.
  • Verify camera's IP address using IP Search Tool.
  • جرب طريقة مختلفة web المتصفح.
  • Reset camera to factory defaults (refer to ZKTeco support for procedure, as this may vary by model).

8. المواصفات

المعلمةالتفاصيل
اسم الموديلBS-52O12K
مستشعر الصورة2.0MP 1/2.9" Progressive Scan CMOS
دقة1080P (1920x1080)
عدسة3.6 ملم
ضغط الفيديوH.265/H.264
معدل البت32Kbps ~ 8Mbps
إيثرنت1*10/100Mbps RJ45 Ethernet port
الليل والنهارIR-Cut filter with auto switch
حماية الدخولIP67
الحماية من الصواعقUp to 6KV
مصدر الطاقةPoE (الطاقة عبر الإيثرنت) أو 12 فولت تيار مستمر (المحول غير مرفق)
أبعاد المنتج16.03 × 6.34 × 6.45 سم
وزن العنصر300 جرام
درجة حرارة التشغيل(Information not provided in source data, typical range is -30°C to 60°C for outdoor cameras)
الأجهزة المتوافقةLaptop, iOS/Android Phone/Pad
نوع التركيبحامل الحائط

9. الضمان والدعم

معلومات الضمان: The ZKTeco BS-52O12K IP Bullet Camera typically comes with a standard manufacturer's warranty. Specific warranty terms and duration may vary by region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed warranty information. An optional 1-year extended warranty may be available for purchase.

الدعم الفني: For technical assistance, troubleshooting beyond this manual, or inquiries regarding product functionality, please contact ZKTeco customer support. You can usually find contact information, FAQs, and driver/firmware downloads on the official ZKTeco webموقع:

Visit ZKTeco Official Webموقع

When contacting support, please have your product model number (BS-52O12K) and purchase details ready.

المستندات ذات الصلة - BS-52O12K

قبلview دليل مستخدم ZKTeco SenseFace 2A - التحكم في الوصول البيومتري وتسجيل الحضور والانصراف
استكشف دليل مستخدم ZKTeco SenseFace 2A للحصول على إرشادات مفصلة حول التركيب والتشغيل وإعدادات النظام وميزات الأمان البيومترية المتقدمة. تعرّف على حلول ZKTeco الرائدة في مجال التعرف على الوجه والتحكم في الوصول.
قبلview دليل مستخدم ZKBio CVAccess - ZKTeco
دليل مستخدم شامل لبرنامج ZKBio CVAccess من ZKTeco، يشرح بالتفصيل ميزات التحكم في الوصول، وإدارة الحضور، والمراقبة بالفيديو الذكية. يتضمن عمليات النظام، وتكوين الجهاز، وإعداد التقارير.
قبلview دليل تثبيت ZKBioSecurity V5000 | ZKTeco
دليل تثبيت مُفصّل لبرنامج ZKBioSecurity V5000 من ZKTeco (الإصدار V5000_4.0.0_R). يُغطي هذا الدليل متطلبات الأجهزة والمتطلبات الأساسية للبرنامج، بالإضافة إلى إجراءات التثبيت خطوة بخطوة لحلول الأمان المتقدمة من ZKTeco.
قبلview ZKTeco UHF5 Pro / UHF10 Pro دليل سريع للشاشة
دليل موجز وسهل الوصول إليه لتشغيل شاشات ZKTeco UHF5 Pro وUHF10 Pro A، يغطي الوظائف الرئيسية، وتعليمات التشغيل، والمعلمات الأساسية، وتفاصيل الواجهة.
قبلview دليل مستخدم AntarVis2.0: دليل شامل لـ ZKTeco View نظام الإدارة
استكشف AntarVis2.0 View نظام إدارة الفيديو (VMS) مع دليل المستخدم المفصل هذا. تعرّف على التثبيت، ودمج الأجهزة (NVR، DVR، IPC)، والمراقبة في الوقت الفعلي، وتشغيل الفيديو، ومعالجة الإنذارات، وتكوين النظام لحل المراقبة الاحترافي من ZKTeco.
قبلview دليل تثبيت ZKBioSecurity: إعداد برنامج ZKTeco خطوة بخطوة
دليل شامل لتثبيت ZKBioSecurity، منصة الأمان المتكاملة من ZKTeco. يشمل التنزيل، والإعداد، والتكوين، واختيار الوحدة، وإعادة تشغيل النظام للتحكم في الوصول وتسجيل الحضور والانصراف.