1. المقدمة
Thank you for choosing the IKEA Drawer Unit. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
2. معلومات السلامة
- خطر الانقلاب: Furniture tip-overs can cause serious or fatal crushing injuries. Always secure this unit to the wall using the provided anti-tip device.
- حَشد: Assembly must be carried out by a competent person. Incorrect assembly can lead to the furniture tipping or falling, causing serious injury.
- أجزاء صغيرة: Keep all small parts, such as screws and fittings, out of reach of children during assembly to prevent choking hazards.
- حدود الوزن: لا تفرط في تحميل الأدراج. وزّع الوزن بالتساوي للحفاظ على الثبات.
- الموقع: Place the unit on a level surface. Uneven surfaces can affect stability and drawer function.
3. محتويات العبوة
Before assembly, ensure all parts are present. Refer to the separate assembly diagram for a detailed list of components and hardware. If any parts are missing or damaged, contact IKEA customer service.
الصورة 1: مثالample of IKEA Drawer Unit components. This image illustrates the various panels, hardware, and drawer parts typically included in the package, laid out before assembly begins.
4. الإعداد والتجميع
Assembly is required for this IKEA Drawer Unit. Follow the steps below and refer to the included graphical instructions for detailed guidance.
- تحضير مساحة العمل: Clear a spacious, clean, and level area for assembly. Lay down a blanket or cardboard to protect the furniture parts and your floor.
- تحديد الأجزاء: Unpack all components and identify them using the parts list in the separate assembly diagram.
- تجميع الإطار: Begin by assembling the main frame of the drawer unit. Attach the side panels to the top and bottom panels using the provided dowels and cam locks/screws. Ensure all connections are secure.
- قم بتثبيت اللوحة الخلفية: Secure the back panel to the frame using small nails or screws. This adds stability and squareness to the unit.
- تركيب مجاري الأدراج: Attach the drawer runners to the inside of the frame according to the diagram. Pay attention to the orientation (left/right, front/back).
- تجميع الأدراج: For each drawer, assemble the front, back, and side panels. Slide the bottom panel into the grooves. Attach the drawer runners to the sides of the assembled drawer.
- إدراج الأدراج: Carefully slide each assembled drawer onto its respective runners in the main frame.
- ربط المقابض: Secure handles or knobs to the drawer fronts.
- تأمين على الحائط: Crucially, attach the anti-tip device to the back of the drawer unit and then to a wall stud or appropriate wall anchor. وهذا يمنع الوحدة من الانقلاب.
Tools required: Hammer, screwdriver (Phillips head), measuring tape.
5. تعليمات التشغيل
- فتح/إغلاق الأدراج: Gently pull or push the drawer fronts to open and close. Avoid forcing drawers.
- تحميل: Distribute items evenly within the drawers. Avoid placing excessively heavy items in a single drawer, especially in upper drawers, as this can affect stability.
- استقرار: Always ensure the unit is securely anchored to the wall. Do not climb on or lean heavily on the unit.
6. الصيانة
- تنظيف: امسح بالإعلانamp استخدم قطعة قماش ومنظفًا لطيفًا. جفف بقطعة قماش نظيفة. تجنب استخدام المنظفات الكاشطة أو المواد الكيميائية القاسية.
- المثبتات: Periodically check all assembly fasteners (screws, cam locks) and re-tighten if necessary to maintain structural integrity.
- مجاري الأدراج: If drawers become stiff, a small amount of silicone-based lubricant can be applied to the runners, but typically this is not required for IKEA units.
7. استكشاف الأخطاء وإصلاحها
- Drawers stick or don't close properly:
- Check if the unit is on a level surface.
- تأكد من شد جميع مسامير التجميع.
- Verify that drawer runners are correctly installed and aligned.
- Check for obstructions inside the drawer or on the runners.
- اهتزازات الوحدة:
- تأكد من وضع الوحدة على سطح مستوٍ.
- Re-tighten all assembly fasteners.
- Confirm the back panel is securely attached, as it contributes to stability.
- Verify the unit is properly anchored to the wall using the anti-tip device.
8. المواصفات
| ميزة | التفاصيل |
|---|---|
| نموذج | وحدة درج |
| ماركة | ايكيا |
| مطلوب التجميع | نعم |
| ASIN | B07GX38LWB |
| الشركة المصنعة | ايكيا |
9. الضمان والدعم
IKEA products are designed with quality and durability in mind. For specific warranty information regarding your Drawer Unit, please refer to the warranty documentation included with your purchase or visit the official IKEA webموقع.
For customer support, missing parts, or further assistance, please contact IKEA customer service through their official channels. Have your proof of purchase and product model information ready.
