Rolair JC20 Portable Air Compressor User Manual

1. المقدمة

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Rolair JC20 Hand Carry Portable Air Compressor. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

The Rolair JC20 is an oilless, 2 horsepower electric air compressor designed for light-duty framing and roofing work. It features a two-cylinder pump, a low-amp draw motor, a heavy-duty roll-cage, integrated cord wrap, upward-facing gauges, and a quarter-turn drain valve, all contributing to its quiet operation at only 70 dB.

2. معلومات السلامة

يجب عليك دائمًا مراعاة احتياطات السلامة التالية لتقليل خطر التعرض لصدمة كهربائية أو حريق أو إصابة خطيرة.

• اقرأ جميع التعليمات: Familiarize yourself with the compressor's controls and proper operation.
• السلامة الكهربائية: تأكد من أن مصدر الطاقة يتطابق مع حجم الضاغطtage (115 Volts AC). Do not operate in wet conditions. Always use a grounded outlet.
• معدات الحماية الشخصية: Wear safety glasses or goggles when operating the compressor or using air tools. Hearing protection is recommended, especially during prolonged use.
• بيئة التشغيل: Operate the compressor in a well-ventilated area. Keep children and bystanders away. Do not operate near flammable liquids or gases.
• سلامة الضغط: Never exceed the maximum operating pressure of any air tool or accessory. Do not attempt to modify the pressure relief valve.
• صيانة: افصل الطاقة قبل إجراء أي صيانة أو إصلاحات.
• الأسطح الساخنة: The compressor pump and motor can become hot during operation. Avoid contact with hot surfaces.

3. الميزات والمكونات الرئيسية

The Rolair JC20 is engineered with several features for performance and durability:

• عملية هادئة للغاية: واحد stage oilless design with only 70 dB noise level.
• Durable Pump: Cast aluminum cylinder with stainless steel reed valves.
• محرك فعال: 1700 RPM low-amp draw motor with automatic overload protection.
• Protective Roll-Cage: Heavy-duty design to protect the pump and motor.
• لف الحبل المتكامل: للتخزين والنقل المريح.
• Upward-Facing Gauges: For easy monitoring of tank and regulated pressure.
• Quarter-Turn Drain Valve: For easy moisture drainage from the tank.

الشكل 3.1: الجبهة view of the Rolair JC20 Air Compressor, showing the green tank, motor, gauges, and protective roll-cage.

الشكل 3.2: بزاوية view highlighting the two-cylinder pump heads and motor assembly.

الشكل 3.3: الجانب view of the Rolair JC20, illustrating the compact design and component layout within the roll-cage.

4. الإعداد

1. فك التعبئة: Carefully remove the compressor from its packaging. Inspect for any shipping damage. Report any damage to your dealer immediately.
2. الموقع: Place the compressor on a firm, level surface in a clean, dry, and well-ventilated area. Ensure adequate clearance around the unit for air circulation.
3. التوصيل الكهربائي:
   • تأكد من أن مصدر الطاقة في مستوى الصوتtage matches the compressor's requirements (115 Volts AC).
   • Plug the power cord into a grounded electrical outlet. Avoid using extension cords if possible. If an extension cord is necessary, use a heavy-duty, grounded cord of appropriate gauge for the distance.
4. Initial Drain: Before first use, ensure the quarter-turn drain valve at the bottom of the tank is closed.

5. تعليمات التشغيل

1. تشغيل الطاقة: Locate the ON/OFF switch (typically a rocker switch or pressure switch) and turn the compressor ON. The compressor will begin to build pressure.
2. Pressure Build-Up: Allow the compressor to run until it reaches its maximum pressure and the motor automatically shuts off. This indicates the tank is fully charged.
3. ربط الأدوات الهوائية:
   • Attach your air hose to the quick-connect coupler on the compressor.
   • قم بتوصيل أداة الهواء بالطرف الآخر من الخرطوم.
4. ضبط ضغط الإخراج: Use the pressure regulator knob to set the desired output pressure for your air tool. Monitor the regulated pressure gauge.
5. عملية: Begin using your air tool. The compressor will cycle on and off automatically to maintain tank pressure as air is consumed.
6. إيقاف التشغيل: When finished, turn the compressor OFF using the ON/OFF switch.
7. أزال الضغط: Disconnect the air hose and tool. Allow any remaining air in the tank to escape through the drain valve or by briefly opening the regulator.

6. الصيانة

Regular maintenance ensures the longevity and optimal performance of your Rolair JC20 compressor. Always disconnect the power before performing maintenance.

• Daily: Drain Moisture from Tank:
  • With the compressor off and tank depressurized, open the quarter-turn drain valve located at the bottom of the tank.
  • Allow all accumulated moisture to drain completely.
  • Close the drain valve securely.
• Weekly/Monthly: Inspect Air Filter:
  • Check the air intake filter for dirt and debris.
  • Clean or replace the filter as necessary. A clogged filter can reduce compressor performance and lifespan.
• Periodically: Inspect for Leaks:
  • With the compressor pressurized, apply a soapy water solution to all fittings and connections.
  • Bubbles indicate a leak. Tighten connections or replace seals as needed.
• تخزين: Store the compressor in a clean, dry location. Ensure the tank is drained of moisture before storage.

7. استكشاف الأخطاء وإصلاحها

8. المواصفات

9. الضمان والدعم

For warranty information, please refer to the documentation included with your purchase or visit the official Rolair website. For technical support, parts, or service inquiries, please contact Rolair customer service or your authorized dealer.

الشركة المصنعة: رولاير

معلومات الاتصال: Please refer to the contact details provided on the Rolair official website or your purchase receipt for the most current support options.