Geko G02062 3T Balloon Jack Instruction Manual

1. انتهى المنتجview

The Geko G02062 3T Balloon Jack is a robust and reliable lifting device designed for various automotive and workshop applications. Constructed from high-quality alloy steel, this pneumatic jack offers a lifting capacity of 3 tons, ensuring solid performance and durability. It is manufactured in Poland, adhering to stringent quality standards.

الصورة 1.1: الجانب view of the Geko G02062 3T Balloon Jack, showcasinبفضل تصميمه الصغير ومقبضه.

2. معلومات السلامة

تحذير: عدم اتباع تعليمات السلامة هذه قد يؤدي إلى إصابة خطيرة أو تلف الممتلكات.

• Always read and understand this entire instruction manual before operating the Geko G02062 3T Balloon Jack.
• Ensure the jack is placed on a firm, level, and stable surface capable of supporting the load.
• Never exceed the maximum lifting capacity of 3 tons (6000 lbs).
• Use appropriate jack stands to support the vehicle immediately after lifting. Never rely solely on the balloon jack to hold a vehicle.
• Keep hands, feet, and other body parts clear of the jack and the load during lifting and lowering operations.
• ارتدِ معدات الحماية الشخصية المناسبة، مثل نظارات السلامة والقفازات.
• Do not use the jack if it shows any signs of damage, leaks, or malfunction.
• Ensure the vehicle's parking brake is engaged and wheels are chocked before lifting.
• Never work under a vehicle supported only by a jack.

3. محتويات العبوة

عند فك العبوة، تأكد من أن جميع المكونات موجودة وغير تالفة:

• 1x Geko G02062 3T Balloon Jack

If any parts are missing or damaged, do not use the product and contact your retailer.

4. الإعداد

Before operating the jack, perform the following setup steps:

1. Carefully remove the Geko G02062 3T Balloon Jack from its packaging.
2. Visually inspect the entire jack for any signs of shipping damage, such as dents, cracks, or leaks. Do not proceed if damage is observed.
3. Ensure the air inlet and release valves are in the closed position before connecting to an air source.
4. Connect a suitable compressed air hose to the jack's air inlet valve. Ensure the connection is secure and free of leaks. The recommended air pressure for optimal operation is typically between 6-8 bar (90-120 PSI), but always refer to the specific pressure requirements of your air compressor.

الصورة 4.1: عن قرب view of the control valves and air connection point on the jack's handle.

5. تعليمات التشغيل

5.1. Lifting a Vehicle

1. Position the vehicle on a firm, level surface. Engage the parking brake and chock the wheels that will remain on the ground.
2. Carefully slide the Geko G02062 3T Balloon Jack under the vehicle, ensuring the lifting pad is centered directly beneath the manufacturer's recommended lifting point.
3. Slowly open the air inlet valve (typically green or marked 'IN') to allow compressed air to inflate the balloon. The jack will begin to raise the vehicle.
4. Continuously monitor the lifting process to ensure stability and proper alignment. Do not lift the vehicle beyond the maximum safe height or the jack's capacity.
5. Once the desired height is reached, close the air inlet valve securely. Immediately place appropriate jack stands under the vehicle's designated support points.

5.2. Lowering a Vehicle

1. Ensure the vehicle is securely supported by jack stands.
2. Slightly raise the vehicle with the balloon jack to relieve pressure on the jack stands, then carefully remove the jack stands.
3. Slowly open the air release valve (typically red or marked 'OUT') to gradually deflate the balloon, lowering the vehicle. Control the rate of descent by adjusting the valve opening.
4. Once the vehicle is fully lowered and resting on its wheels, close the air release valve and remove the jack from underneath the vehicle.

الصورة 5.1: تفصيلية view of the multi-stage balloon and the robust lifting pad, designed for stable contact with the vehicle.

6. الصيانة

Regular maintenance ensures the longevity and safe operation of your Geko G02062 3T Balloon Jack:

• تنظيف: Keep the jack clean and free from dirt, grease, and debris. Wipe down the exterior with a damp قطعة قماش بعد كل استخدام.
• تقتيش: Regularly inspect the air hose, connections, and the balloon for any signs of wear, cuts, punctures, or leaks. Check all bolts and fasteners for tightness.
• تخزين: Store the jack in a dry, clean, and safe environment when not in use. Avoid exposing it to extreme temperatures or direct sunlight for prolonged periods.
• تشحيم: Periodically apply a light coat of general-purpose lubricant to moving parts, such as the wheels and handle pivot points, to ensure smooth operation.
• لا توجد تعديلات: Do not attempt to modify the jack in any way. Unauthorized modifications can compromise safety and void any warranty.

7. استكشاف الأخطاء وإصلاحها

This section addresses common issues you might encounter with your Geko G02062 3T Balloon Jack:

• Issue: Jack does not lift or lifts slowly.
  الأسباب والحلول المحتملة:
  • Insufficient Air Pressure: Ensure your air compressor is providing adequate pressure (6-8 bar / 90-120 PSI) and that the air supply is connected securely.
  • Air Inlet Valve Closed: Verify the air inlet valve is fully open.
  • التحميل الزائد: Confirm the weight of the vehicle does not exceed the jack's 3-ton capacity.
  • تسرب الهواء: Check all air connections and the balloon for audible leaks. Tighten connections or replace damaged components if necessary.
• Issue: Jack lowers too quickly or unexpectedly.
  الأسباب والحلول المحتملة:
  • Air Release Valve Open: Ensure the air release valve is fully closed when lifting and only opened slowly for controlled lowering.
  • تسرب الهواء: Inspect the balloon and air lines for any damage or leaks that could cause rapid pressure loss.
• Issue: Jack is unstable during operation.
  الأسباب والحلول المحتملة:
  • سطح غير مستو: Always operate the jack on a firm, level, and stable surface.
  • Improper Load Placement: Ensure the vehicle's lifting point is centered on the jack's lifting pad.
  • Damaged Jack: Discontinue use if the jack appears bent, cracked, or otherwise compromised.

If you encounter issues not listed here or if troubleshooting steps do not resolve the problem, contact your retailer or a qualified service technician.

8. المواصفات

9. الضمان والدعم

Warranty and support information for the Geko G02062 3T Balloon Jack is not available in this document. Please refer to your purchase documentation, the product packaging, or contact the retailer from whom you purchased the product for specific details regarding warranty coverage and customer support services.