Behringer NX1000 خفيف الوزن للغاية بقوة 1000 واط من الفئة D Ampدليل التعليمات للمُحَرِّك

1. المقدمة

This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.

أمام view of the Behringer NX1000 ampمُلَفِّتُ، مُشْرِكasinبفضل تصميمه الصغير وأزرار التحكم الموجودة على اللوحة الأمامية.

2. ماذا يوجد في الصندوق

تأكد من وجود جميع المكونات عند فك العبوة:

• Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Ampالقمامة
• كابل الطاقة
• دليل التعليمات (هذا المستند)

3. الميزات الرئيسية

• Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
• Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption.
• Built-in stereo crossover with low-cut, high-cut and full range Mode.
• SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.

An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.

A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.

4. الإعداد

Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your ampمكبر:

4.1 تركيب الرف

The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.

سايد بروfile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.

4.2. اتصالات الصوت

قم بتوصيل مصدر الصوت (الخلاط، المسبق)amp(مُضخِّم، إلخ) إلى amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.

قم بتوصيل مكبرات الصوت السلبية الخاصة بك بـ amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.

مفصل view of the rear panel, showing input and output connectors for audio signals and speakers.

4.3. توصيل الطاقة

Connect the supplied power cable to the AC inlet on the rear panel of the amplifier and then to a suitable power outlet.

4.4. Setup Video Guide

5. تشغيل Ampالقمامة

5.1. تشغيل / إيقاف التشغيل

اضغط على قوة قم بتشغيل المفتاح الموجود على اللوحة الأمامية لتشغيل amplifier on or off. The قوة LED will illuminate when the unit is active.

Close-up of the power button, indicating its location on the front panel.

5.2. ضوابط مستوى الصوت

ضبط القناة أ و القناة ب gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.

5.3. اختيار الوضع

On the rear panel, use the وضع switch to select between ستيريو, جسر، أو موازي operation, depending on your speaker configuration requirements.

• ستيريو: Each channel operates independently, providing separate left and right audio signals.
• BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
• موازى: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.

5.4. إعدادات التقاطع

Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.

5.5. مؤشرات LED

The front panel features several LED indicators:

• PRO (Protect): يضيء إذا amplifier enters protection mode due to overload, overheating, or short-circuit.
• حد: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
• الإشارة: Lights up when an audio signal is present on the respective channel.
• قوة: يشير إلى أن ampتم تشغيل المحرك.

5.6. انتهى المنتجview فيديو

6. الصيانة

لضمان طول العمر والأداء الأمثل لجهازك amplifier, follow these maintenance tips:

• حافظ على نظافة الجهاز بمسحه بقطعة قماش ناعمة وجافة. تجنب استخدام المنظفات الكاشطة أو المذيبات.
• ضمان التهوية الكافية حول amplifier to prevent overheating. Do not block the ventilation grilles.
• Regularly check all cable connections for secure fit and signs of wear.

7. استكشاف الأخطاء وإصلاحها

If you encounter issues with your Behringer NX1000 ampالمحفز، راجع المشاكل والحلول الشائعة التالية:

• لا يوجد إخراج صوت:
  • Check all audio input and output connections.
  • تأكد من amplifier is powered on and the POWER LED is illuminated.
  • تحقق من أن مصادر الإدخال نشطة وترسل إشارة.
  • Adjust channel gain knobs and master volume on your mixer/preamp.
• الصوت المشوه:
  • Check if the LIMIT LED is illuminated; reduce input level if it is.
  • تأكد من أن معاوقة مكبر الصوت تتطابق مع ampقدرات لايفير.
  • Inspect speaker cables for damage or incorrect wiring.
• Amplifier Enters Protect Mode (PRO LED illuminated):
  • اغلاق amplifier and disconnect all speakers.
  • Check for short circuits in speaker cables or faulty speakers.
  • Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
  • Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
• ضوضاء المروحة المفرطة:
  • تأكد من amplifier has sufficient airflow and is not in an enclosed space.
  • Clean any dust buildup from the fan and ventilation grilles.

8. المواصفات

9. الضمان والدعم

The Behringer NX1000 ampيأتي الليف مع أ ضمان محدود. For detailed warranty information, product support, or service inquiries, please visit the official Behringer webالموقع أو اتصل بدعم العملاء مباشرة.

Always refer to the manufacturer's official resources for the most accurate and up-to-date information regarding your product.