1. المقدمة
Thank you for choosing the Digoo DG-HOSA 433MHz Wireless Infrared PIR Detector. This device is designed to enhance your home security by detecting motion within its coverage area. Please read this manual carefully before installation and operation to ensure proper use and optimal performance.
2. انتهى المنتجview
The Digoo DG-HOSA is a passive infrared (PIR) motion detector that senses changes in infrared radiation caused by the movement of people or objects. It operates wirelessly at 433MHz, making it compatible with various security systems.
Image of the Digoo DG-HOSA Wireless Infrared PIR Detector, a white, rectangular device with a rounded top and bottom, featuring a translucent upper section for the sensor and the 'DIGOO' logo on the lower opaque section.
3. المواصفات
| ميزة | وصف |
|---|---|
| العمل المجلدtage | 2x بطارية AAA |
| التيار العامل | 25 مللي أمبير |
| ساكنة الحالية | 15 ميكرو أمبير |
| الكشف عن المسافة | 8-12m (depending on house situation) |
| المسافة الانبعاثات | 80 م (منطقة مفتوحة) |
| كشف الزاوية | 120° |
| ارتفاع التثبيت | Recommend 1.8m-2.2m |
| درجة حرارة التشغيل | -10 درجة مئوية إلى 55 درجة مئوية |
| التردد اللاسلكي | 433 ميجا هرتز |
| نموذج | DG-HOSA |
| ماركة | ديجو |
| رمز المنتج الموحد | 688975216338 |
4. الإعداد
4.1 تركيب البطارية
The DG-HOSA detector requires 2x AAA batteries for operation. These are typically included for your convenience. To install or replace batteries:
- حدد مكان حجرة البطارية على الجزء الخلفي من جهاز الكشف.
- افتح غطاء الحجرة.
- قم بإدخال بطاريات AAA الثلاث، مع التأكد من القطبية الصحيحة (+/-).
- أغلق غطاء حجرة البطارية جيدًا.
4.2 التركيب والتثبيت
Proper placement is crucial for effective motion detection.
- ارتفاع التثبيت الموصى به: Install the detector at a height of 1.8m to 2.2m (approximately 5.9 to 7.2 feet) from the floor.
- منطقة الكشف: The detector has a 120° detection angle and a range of 8-12m. Position it to cover the desired area without obstructions.
- Avoid Direct Sunlight/Heat Sources: Do not install the detector in direct sunlight or near heat sources (e.g., radiators, vents) as this can cause false alarms.
- النطاق اللاسلكي: Ensure the detector is within the 80m (open area) wireless range of your compatible security system's receiver. Walls and other obstacles will reduce this range.
5. تعليمات التشغيل
Once installed and powered, the Digoo DG-HOSA detector will begin monitoring its detection area. When motion is detected within its 8-12m range and 120° angle, it will transmit a signal wirelessly at 433MHz to your connected security system. Refer to your security system's manual for instructions on how to pair or enroll the DG-HOSA detector.
The detector is designed for continuous operation. It will automatically reset after a detection event, ready to detect subsequent motion.
6. الصيانة
To ensure the longevity and reliable performance of your Digoo DG-HOSA detector, follow these maintenance guidelines:
- استبدال البطارية: Replace batteries promptly when the low battery indicator (if present on your security system) is activated, or if the detector stops responding. Use only high-quality AAA batteries.
- تنظيف: Gently wipe the exterior of the detector with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Ensure the sensor lens is clean and free of dust or smudges.
- الاختبار الدوري: Periodically test the detector by walking through its detection area to confirm it is functioning correctly and communicating with your security system.
7. استكشاف الأخطاء وإصلاحها
If you experience issues with your Digoo DG-HOSA detector, consider the following:
- لم يتم الكشف عن أي شيء:
- تأكد من تركيب البطاريات بشكل صحيح وأنها مشحونة بشكل كافٍ.
- Ensure the detector is within the wireless range of your security system.
- Verify there are no obstructions blocking the sensor's view.
- Confirm the installation height is within the recommended range.
- الإنذارات الكاذبة:
- Relocate the detector away from direct sunlight, heating/cooling vents, or rapidly changing temperatures.
- Ensure pets or moving objects (e.g., curtains in a draft) are not triggering the sensor.
- Clean the sensor lens to remove any dust or debris.
- قضايا الاتصال:
- Re-pair the detector with your security system according to your system's instructions.
- Reduce the distance between the detector and the receiver, or remove obstacles that may interfere with the 433MHz signal.
8. الضمان والدعم
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.
