مقدمة
This manual provides detailed instructions for the setup, operation, and maintenance of your KWANWA Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.
الصورة: الجبهة view of the KWANWA Alarm Clock displaying 12:45 in red LED digits. The clock has a black case and a large, clear screen.
محتويات الحزمة
تأكد من وجود جميع العناصر في العبوة:
- KWANWA Alarm Clock Unit
- دليل المستخدم (هذا المستند)
ملحوظة: البطاريات غير متضمنة ويجب شراؤها بشكل منفصل.
يثبت
1. تركيب البطارية
- حدد مكان حجرة البطارية على الجزء الخلفي من الساعة.
- افتح غطاء حجرة البطارية.
- Insert two (2) D-size alkaline batteries, ensuring correct polarity (+/-).
- أغلق غطاء حجرة البطارية جيدًا.
الصورة: الخلفية view of the KWANWA Alarm Clock, highlighting the battery compartment and various control buttons for hour, minute, alarm, and time settings.
2. ضبط الوقت الأولي
- Press the "TIME SET" button on the back of the clock. The hour digits will begin to flash.
- استخدم زر "الساعة" لضبط الساعة.
- Press "TIME SET" again. The minute digits will flash.
- Use the "MIN" button to adjust the minutes.
- Press "TIME SET" a third time to confirm and exit time setting mode.
3. خيارات التنسيب
The clock can be placed on a flat surface or mounted on a wall.
- Table-top/Desk Placement: Extend the two unfoldable stand legs located on the back of the clock to position it upright on any flat surface.
- التثبيت على الحائط: Utilize the three wall-mounting hang holes on the back of the clock. Ensure appropriate wall anchors and screws are used for secure installation (not included).
الصورة: الجانب view of the KWANWA Alarm Clock illustrating its dimensions (8.7 inches wide, 5.6 inches high, 1.8 inches deep) and highlighting features like large display, wall mount/table top, battery powered, adjustable LED brightness, daily alarm, and auto night mode.
تعليمات التشغيل
1. عرض الوقت
The clock displays time in a 12-hour format. The large LED digits are constantly lit for easy readability.
2. إعداد التنبيه
- Press the "AL SET" button on the back of the clock. The alarm hour digits will flash.
- Use the "HOUR" button to set the desired alarm hour.
- Press "AL SET" again. The alarm minute digits will flash.
- Use the "MIN" button to set the desired alarm minutes.
- Press "AL SET" a third time to confirm and exit alarm setting mode.
To activate or deactivate the alarm, press the "AL ON/OFF" button. An indicator will show if the alarm is active.
3. إيقاف الإنذار
When the alarm sounds, it will gradually increase in volume for up to 2 minutes. To stop the alarm, touch the "AL STOP" button located on the front right side of the clock.
Image: Two panels demonstrating alarm functionality. The top panel shows a hand pressing the "AL STOP" button on the clock face to silence the alarm. The bottom panel illustrates the alarm's volume gradually increasing over time, with the clock showing 6:00 and then 6:02.
4. تعديل السطوع
The clock offers three levels of brightness (High, Medium, Low) and an automatic night mode.
- الضبط اليدوي: Press and hold the "MIN" button for 2 seconds to cycle through the brightness levels (High, Medium, Low).
- الوضع الليلي التلقائي: The LED display will automatically dim during 8 PM to 6 AM to conserve energy and reduce light disturbance during sleep.
Image: Three KWANWA Alarm Clocks side-by-side, demonstrating different brightness settings: High (brightest), Medium, and Low (dimmest), with corresponding sun icons indicating light intensity.
5. Flashing Dots Control
The flashing of the dots between the hour and minute digits can be turned off.
- To start/stop the flashing, press and hold the "MIN" button for 2 seconds.
صيانة
1. استبدال البطارية
When the display dims significantly or the clock stops functioning, it is time to replace the batteries. Follow the battery installation steps in the "Setup" section. Ensure to use fresh D-size alkaline batteries for optimal performance and longevity (up to 12 months).
2. التنظيف
To clean the clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the display or casing.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الساعة لا تعمل أو شاشتها فارغة. | البطاريات فارغة أو تم تركيبها بشكل غير صحيح. | Replace with fresh D-size alkaline batteries, ensuring correct polarity. |
| الوقت غير دقيق. | Initial setting error or prolonged use (minor drift). | Re-set the time using the "TIME SET" button. The clock has an accuracy of ±30 seconds per month. |
| لا يصدر صوت الإنذار. | لم يتم تفعيل التنبيه أو تم ضبطه بشكل غير صحيح. | Ensure the alarm is turned ON using the "AL ON/OFF" button and that the alarm time is correctly set. |
| الشاشة إما خافتة جداً أو ساطعة جداً. | إعداد السطوع يحتاج إلى تعديل. | Manually adjust brightness by pressing and holding the "MIN" button for 2 seconds. Check if auto night mode is active. |
تحديد
- نموذج: كيه دبليو 715 إس
- نوع العرض: الصمام الرقمي
- لون: Black Case-red Led Digit
- أبعاد المنتج: 8.7 بوصة عرض × 5.6 بوصة ارتفاع × 1.8 بوصة عمق
- وزن السلعة: 11.7 أونصات
- مصدر الطاقة: Battery Powered (2 x D-size Alkaline Batteries, not included)
- ميزة خاصة: Cordless, Auto Dimmer Mode, Wall-mountable, Table-top
- مادة: بلاستيك
- دقة الوقت: ±30 ثانية شهريا
- مدة التنبيه: Up to 120 seconds (gradually increasing volume)
الضمان والدعم
معلومات الضمان
This KWANWA Alarm Clock comes with a ضمان محدود. Please refer to the product packaging or contact KWANWA customer service for specific details regarding warranty coverage and duration.
دعم العملاء
For any questions, technical assistance, or warranty claims, please contact KWANWA customer support through the retailer's platform or visit the official KWANWA store page on Amazon: KWANWA Store.
معلومات إضافية
لم يتم العثور على مقاطع فيديو رسمية للمنتج من البائع في البيانات المقدمة لتضمينها في هذا الدليل.
