1. المقدمة وما فوقview
This manual provides essential information for the proper installation, operation, and maintenance of your QSC AD-C6T-WH 6.5-inch ceiling-mount speaker. The AD-C6T-WH is a two-way surface speaker designed for professional audio applications, featuring a 70/100V transformer with a 16-ohm bypass and 135-degree conical DMT coverage. It is engineered for blind mount installations using the included C-ring and rails.
الشكل 1: الجبهة view of the QSC AD-C6T-WH speaker.
2. معلومات السلامة
يرجى قراءة وفهم جميع تعليمات السلامة قبل تركيب أو تشغيل هذا المنتج. قد يؤدي عدم القيام بذلك إلى إصابة أو تلف الجهاز.
- شخص مؤهل: Installation should only be performed by qualified personnel familiar with local building codes and wiring practices.
- انقطاع التيار الكهربائي: Ensure all power to the installation area is disconnected before beginning any wiring or installation procedures.
- التثبيت الآمن: Always ensure the speaker is securely mounted to a structurally sound ceiling or support system to prevent falling.
- التوصيلات الكهربائية: Use appropriate gauge wiring for speaker connections and ensure all connections are secure and insulated.
- الظروف البيئية: Do not expose the speaker to excessive moisture or extreme temperatures. This product is not waterproof.
3. محتويات العبوة
تأكد من وجود جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:
- QSC AD-C6T-WH 6.5-inch Ceiling-Mount Speaker (quantity as purchased)
- C-ring and tile rails
- Rail screws
- موصل Euroblock
- قالب القطع
- Tether grille
4. الإعداد والتثبيت
The QSC AD-C6T-WH speaker is designed for blind mount installation in ceilings. Follow these general steps for proper setup:
- وضع الخطة: Determine the optimal location for speaker placement, considering acoustic coverage and structural integrity of the ceiling.
- تحضير الافتتاح: Use the provided cut-out template to mark and create the necessary opening in the ceiling. Ensure the opening size is accurate to allow for proper speaker fit and secure mounting.
- تثبيت أجهزة التثبيت: Insert the C-ring and tile rails through the ceiling opening. Secure them according to the specific instructions provided with the mounting hardware, using the rail screws. This hardware provides a secure anchor for the speaker.
- التوصيلات السلكية:
- قم بتوصيل أسلاك السماعات من جهازك ampمكبر لموصل Euroblock.
- For 70V/100V constant voltage systems, select the appropriate tap setting on the speaker's transformer.
- For low impedance applications, bypass the transformer and connect directly to the 16-ohm input.
- تأكد من صحة القطبية (+ إلى + و - إلى -) لجميع التوصيلات.
- جبل المتحدث: Carefully insert the speaker into the ceiling opening, aligning it with the C-ring and tile rails. Secure the speaker by tightening the mounting clamps, ensuring a snug fit without over-tightening.
- تثبيت الشبك: Attach the tether grille to the speaker. The grille is typically magnetic or uses a friction fit.
الشكل 2: الجانب view illustrating the speaker's mounting mechanism and connection points.
5. تعليمات التشغيل
Once properly installed and wired, operating your QSC AD-C6T-WH speaker is straightforward:
- الاتصال بـ Ampمكبر: Ensure the speaker is correctly connected to a suitable audio ampالمُضخّم أو المُستقبِل.
- تشغيل الطاقة: قم بتشغيل الصوت الخاص بك ampمكبر.
- تشغيل الصوت: Begin playing audio through your connected source. Adjust the volume level on your ampرفع مستوى الاستماع إلى المستوى المطلوب.
- توافق التحكم الصوتي: While the speaker itself is passive, it is compatible with voice control systems when integrated into an audio setup that includes a voice-controlled amplifier or media player. Refer to your amplifier's manual for voice control setup.
6. الصيانة
The QSC AD-C6T-WH speaker requires minimal maintenance to ensure long-term performance:
- تنظيف: Periodically wipe the speaker grille and visible surfaces with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- تقتيش: Occasionally inspect the speaker for any signs of physical damage or loose connections.
- لا توجد أجزاء قابلة للصيانة بواسطة المستخدم: There are no user-serviceable parts inside the speaker. Do not attempt to open or repair the unit yourself. Refer all servicing to qualified service personnel.
7. استكشاف الأخطاء وإصلاحها
If you encounter issues with your QSC AD-C6T-WH speaker, refer to the following common troubleshooting steps:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يوجد صوت من السماعة |
|
|
| جودة الصوت مشوهة أو رديئة |
|
|
8. المواصفات
Key technical specifications for the QSC AD-C6T-WH speaker:
| اسم الموديل | AD-C6T-WH |
| نوع السماعة | Woofer (Two-way surface speaker) |
| نوع التركيب | التركيب على السقف |
| قطر مكبر الصوت | 6.5 بوصة (165 مليمترات) |
| تكنولوجيا الاتصال | متحد المحور |
| وضع إخراج الصوت | Stereo (when paired) |
| الحد الأقصى لقوة خرج السماعة | 60 واط |
| حجم الإدخالtage | 100 Volts (for 100V line systems) |
| مادة | معدن |
| وزن العنصر | 27.2 pounds (per pair, as sold) |
| أبعاد الحزمة | 29 × 15 × 13 بوصة |
| المكونات المضمنة | C-ring and tile rails, rail screws, euroblock connector, cut-out template, tether grille |
| مقاوم للماء | خطأ شنيع |
| طريقة التحكم | Voice (via compatible external systems) |
9. معلومات الضمان
The QSC AD-C6T-WH speaker is covered by a ضمان محدود. For specific terms, conditions, and duration of the warranty, please refer to the official warranty documentation provided with your purchase or visit the QSC webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.
10. الدعم
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact QSC customer support. You can find contact information and additional resources on the official QSC website or through your authorized QSC dealer.
الموارد المتاحة على الإنترنت: Visit the QSC Store on Amazon
