1. المقدمة
The Cloudray Ruida RDC6442S DSP Controller is an advanced control system designed for multi-head CO2 laser engraving and cutting machines. It offers precise control, high-performance motor signal output, and a user-friendly interface with a 3.5-inch color display. This manual provides essential information for the proper installation, operation, and maintenance of your RDC6442S controller.
2. معلومات السلامة
تعليمات السلامة الهامة:
- Always disconnect power to the laser machine before installing, maintaining, or troubleshooting the controller.
- Ensure proper grounding of all components to prevent electrical shock.
- Only qualified personnel should perform electrical connections and installations.
- Avoid exposing the controller to moisture, dust, or extreme temperatures.
- Refer to your laser machine's safety manual for additional precautions related to laser operation.
3. محتويات العبوة
تأكد من وجود جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:
Figure 3.1: Contents of the RDC6442S Controller package.
- 1x Control Panel (HMI)
- 1x Mainboard (Controller Board)
- 1x U-Disc Cable I
- 1x U-Disc Cable II
- 1x Adapter & Screws Set
- 1x Network Cable I
- 1x Network Cable II
- 1x Five-core Cable
4. الإعداد والتثبيت
4.1 التثبيت المادي
The RDC6442S controller consists of a mainboard and a separate control panel. Install these components securely within your laser machine's enclosure, ensuring adequate ventilation and protection from environmental factors.
Figure 4.1: Dimensions of the RDC6442S control panel (170mm x 125mm).
Figure 4.2: Dimensions of the RDC6442S mainboard (180.2mm x 117.0mm).
4.2 مخطط الأسلاك
Follow the wiring diagram carefully for connecting the controller to the power supply, motor drivers, and other peripherals. Incorrect wiring can damage the controller or other components.
Figure 4.3: Typical wiring diagram for the RDC6442S controller, showing connections to power supply, motor drivers, and laser components.
4.3 Connection Interfaces
The mainboard features various ports for communication and power:
الشكل 4.4: الجانب view of the RDC6442S mainboard, highlighting Communication Interface, DC Power input, and HMI connection.
الشكل 4.5: العودة view of the RDC6442S mainboard, showing USB, U disk (USB drive), and Network (Ethernet) ports.
- طاقة التيار المستمر: Connect to a stable 24V DC power supply.
- واجهة المستخدم البشرية: Connects to the control panel.
- USB (PC-USB): For direct connection to a computer for data transfer and software control. Supports 12M bps transmission rate up to 5 meters.
- قرص يو: For connecting a USB flash drive to load job fileس مباشرة.
- إيثرنت (الشبكة): For network connectivity, supporting 100M transmission rate up to 200 meters.
5. تعليمات التشغيل
5.1 وظائف لوحة التحكم
The RDC6442S control panel features a 3.5-inch color display and various buttons for direct machine control:
الشكل 5.1: انتهىview of the RDC6442S control panel with its display and buttons.
- إعادة تعيين: يعيد ضبط وحدة التحكم.
- نبض: Initiates a laser pulse for testing.
- سرعة: Adjusts the engraving/cutting speed.
- Min-Power / Max-Power: Controls the minimum and maximum laser power settings.
- File: Accesses stored job files.
- بدء وقفة: Starts or pauses the current job.
- خروج: Exits current menu or operation.
- يدخل: يؤكد الاختيار أو يدخل إلى قائمة.
- أصل: Sets the job origin point.
- إطار: Outlines the job area for positioning verification.
- Directional Arrows (including Z/U): Moves the laser head in X, Y, and Z axes, and controls the U-axis (if configured).
5.2 توافق البرامج
The RDC6442S controller is compatible with several popular laser software applications:
- RDWorksV8: The primary software for designing and controlling laser jobs.
- لايت بيرن: A third-party laser control software known for its intuitive interface and powerful features.
- EngraveLab Laser: Another compatible software for laser engraving and cutting.
الشكل 5.2: مثالample of the RDWorks software interface for job creation and control.
LightBurn Compatible
EngraveLab Compatible
دعم اللغة 5.3
The controller supports multiple languages for user interface customization:
Figure 5.3: Display showing various language options available on the RDC6442S controller.
- إنجليزي
- الفرنسية (الفرنسية)
- Русский (Russian)
- البرتغالية
- Türk (Turkish)
- الألمانية (الألمانية)
- اللغة الأسبانية
- Tiếng Việt (Vietnamese)
- 한국어 (Korean)
- ايطالي (ايطالي)
- 日本語 (Japanese)
- 中文 (Chinese)
6. المواصفات
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | RDC6442S |
| أبعاد المنتج | 5.12 x 6.3 x 9.45 inches (Controller Board) |
| وزن | 2.98 رطل |
| Motor Control Pulse Frequency | Up to 500KHZ |
| USB Transmission Rate | 12M bps (Max. distance 5 meters) |
| Network Transmission Rate | 100M (Max. distance 200 meters) |
| عرض | 3.5-inch Colorful Display Screen |
| Interpolation System | Linear, Circular Arc, B Spline |
| الشركة المصنعة | كلاودراي |
7. الصيانة
Regular maintenance helps ensure the longevity and optimal performance of your RDC6442S controller:
- تنظيف: Periodically clean the control panel and mainboard with a soft, dry cloth. Avoid using liquid cleaners or solvents.
- بيئة: Operate the controller in a clean, dry environment with stable temperature and humidity. Protect it from excessive dust, especially metal particles from cutting operations.
- الاتصالات: قم بفحص جميع توصيلات الأسلاك بشكل منتظم للتأكد من أنها آمنة وخالية من التآكل.
- تحديثات البرامج الثابتة: Check the Cloudray webابحث في الموقع عن أي تحديثات متاحة للبرامج الثابتة التي قد تُحسّن الأداء أو تُضيف ميزات جديدة. اتبع تعليمات التحديث بدقة.
8. استكشاف الأخطاء وإصلاحها
يُقدّم هذا القسم إرشادات عامة للمشاكل الشائعة. أما بالنسبة للمشاكل المعقدة، فيُرجى الاتصال بالدعم الفني.
- وحدة التحكم لا تعمل:
- Verify the DC power supply is connected correctly and providing the specified voltagه (24 فولت).
- Check all power cables for damage or loose connections.
- لا يوجد اتصال بالكمبيوتر:
- Ensure the USB or Ethernet cable is securely connected to both the controller and the computer.
- Check if the correct drivers are installed on your computer.
- Verify network settings if using an Ethernet connection.
- Laser Not Firing or Moving:
- Confirm all motor and laser connections are secure.
- Check software settings for power and speed.
- Ensure emergency stop buttons on the laser machine are not engaged.
- Incorrect Engraving/Cutting Results:
- Calibrate the machine's axes and ensure proper focus of the laser.
- Review job settings in your software (speed, power, resolution).
9. الضمان والدعم
The Cloudray RDC6442S DSP Controller is manufactured by Cloudray. For warranty information, technical support, or service inquiries, please contact Cloudray directly through their official channels. Keep your purchase receipt as proof of purchase.
الشركة المصنعة: كلاودراي
تاريخ التوفر الأول: 8 فبراير 2018
Figure 9.1: Certificates of conformity for Cloudray products, indicating compliance with standards.
