StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

نموذج: RKCONS1901 |العلامة التجارية: StarTech.com

1. المقدمة

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. ماذا يوجد في الصندوق

  • وحدة تحكم KVM
  • 6 ft [1.8 m] KVM cable
  • صواميل القفص M5
  • مسامير M5

3. الإعداد والتثبيت

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 تركيب الرف

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 توصيل الكابلات

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
مؤخرة view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

الشكل 2: خلفي view of the KVM Console with connection ports.

3.3 Installation Video Reference

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. تعليمات التشغيل

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 استخدام لوحة المفاتيح ولوحة اللمس

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 التنقل في قائمة OSD

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. الصيانة

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • تنظيف: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • تهوية: Ensure proper airflow around the console. Do not block ventilation openings.
  • إدارة الكابلات: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • الظروف البيئية: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. استكشاف الأخطاء وإصلاحها

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • لا يوجد عرض: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • لوحة المفاتيح/الماوس لا تستجيب: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. المواصفات

ميزةمواصفة
رقم الموديلRKCONS1901
ماركةStarTech.com
رف الطول1U
حجم العرض19 بوصة
نوع العرضActive Matrix TFT LCD
اقصي دقة1280×1024
لوحة المفاتيح99-key full keyboard with numeric keypad
جهاز التأشيرلوحة اللمس
واجهة الفيديوفي جي ايه
دعم USBنعم
درجة حرارة التشغيلمن 0 إلى 40 درجة مئوية
متوسط ​​الوقت بين الأعطال50,000 ساعات
أبعاد المنتج (الطول × العرض × الارتفاع)21 × 19 × 1.7 بوصة
وزن العنصر26.8 رطل

8. الضمان والدعم

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com webالموقع أو تواصل مع خدمة العملاء مباشرةً. احتفظ بإيصال الشراء لطلبات الضمان.

المستندات ذات الصلة - RKCONS1901

قبلview StarTech.com 4/8/16 منفذ 1U مثبت على الرف VGA USB KVM Switch مع OSD - دليل المستخدم
Detailed user manual for the StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD (models SV431DUSBU, SV831DUSBU, SV1631DUSBU). Learn about installation, operation, OSD features, specifications, and technical support.
قبلview مفتاح KVM من StarTech.com بثمانية منافذ للتركيب على الرف - دليل المستخدم بدقة 4K وتردد 60 هرتز
دليل مستخدم مفتاح StarTech.com R8AD122-KVM-SWITCH / R8AH202-KVM-SWITCH KVM ذو 8 منافذ للتركيب على الرف. يوفر هذا الدليل تعليمات مفصلة حول التثبيت، وتوصيل وحدات التحكم وأجهزة الكمبيوتر، واستخدام أوامر المفاتيح السريعة لتشغيل 4K بتردد 60 هرتز.
قبلview مفتاح StarTech.com ذو 4/8/16 منفذًا، يُثبّت في رف 1U، مزود بمنفذ USB وVGA وKVM، مع دليل المستخدم لشاشة العرض على الشاشة
يوفر دليل المستخدم هذا معلومات مفصلة حول مفتاح StarTech.com 4/8/16 Port 1U Rack Mount USB VGA KVM Switch مع OSD، بما في ذلك التثبيت والتشغيل والمواصفات والدعم الفني.
قبلview مفتاح تحويل KVM رقمي محسّن عبر بروتوكول الإنترنت من StarTech.com طراز SV441DUSBI / SV841DUSBI ذو 4/8 منافذ USB مع File دليل مستخدم النقل
دليل المستخدم لمفتاح StarTech.com SV441DUSBI و SV841DUSBI ذي 4/8 منافذ KVM الرقمي المحسن USB عبر بروتوكول الإنترنت مع File النقل. تعرف على التثبيت والتكوين والتشغيل والإدارة عن بعد واستكشاف الأخطاء وإصلاحها.
قبلview دليل مستخدم مفتاح KVM ثنائي ورباعي المنافذ DVI USB من StarTech.com: SV231DVIUDDM و SV431DVIUDDM
دليل المستخدم لمفاتيح StarTech.com SV231DVIUDDM (منفذين) و SV431DVIUDDM (أربعة منافذ) DVI USB KVM المزودة بتقنية DDM. يغطي الدليل التركيب والتشغيل والمواصفات ووظائف المفاتيح المختصرة والدعم الفني ومعلومات الضمان.
قبلview StarTech.com ADJSHELFHD/ADJSHELFHDV 1U رف قابل للتعديل عالي التحمل للتركيب على الرف - التركيب والمواصفات
Learn how to install and use the StarTech.com ADJSHELFHD and ADJSHELFHDV 1U adjustable high load fixed rackmount shelves. This guide covers installation steps, included accessories, and technical specifications for these durable server rack shelves.