دليل مستخدم كاميرا المراقبة الأمنية Brinno SHC1000 المثبتة على باب المدخل الأمامي

مقدمة

Image: The Brinno SHC1000 Front Door Peephole Security Camera, showing the interior display unit and exterior camera module.

This manual provides detailed instructions for the installation, operation, and maintenance of your Brinno SHC1000 Front Door Peephole Security Camera. Please read this manual thoroughly before using the device to ensure proper functionality and safety. The Brinno SHC1000 is designed to monitor activity at your front door, capturing images when motion or knocking is detected, and storing them with a time and date stamp.

Image: The concealed design of the Brinno SHC1000, allowing it to remain unseen by visitors while providing security.

محتويات الحزمة

تأكد من تضمين جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:

• (1) SHC1000_12 Main Unit
• (1) MAS200 Motion Sensor Unit
• (4) بطاريات AA
• (1) غسالة
• (1) 12mm Peephole
• (1) Tightening Tool
• (1) Base Flange
• (1) SHC1000_12 User Manual
• (1) SHC1000_12 Quick Guide
• (1) Door Knocking Casing
• (1) Receiver Unit
• (1) مفك براغي
• (3) مسامير
• (1) Battery Lock
• (1) Magnetic Wall Mount

الإعداد والتثبيت

The Brinno SHC1000 offers a straightforward installation process. Follow these steps to set up your device.

1. فتح العلبة والإعداد الأولي

Before beginning installation, ensure all components are present and perform initial setup steps as shown in the unboxing video below.

1. تركيب البطاريات: Open the battery compartment and insert the 4 AA batteries, ensuring correct polarity.
2. أدخل بطاقة MicroSD: Locate the microSD card slot on the side of the main unit and insert a compatible microSD card (up to 32GB recommended).
3. Activate Motion Sensor (MAS200): The MAS200 motion sensor needs to be activated. Remove its front cover, pull out the protective tab to activate its internal battery, and reassemble. The blue LED will flash upon activation.
4. تعيين التاريخ والوقت: Power on the main unit. Navigate to the system settings to set the current date and time for accurate visitor logs.

2. Choosing an Installation Mode

The Brinno SHC1000 offers two primary installation modes for the motion sensor:

Image: Flexible installation options for the Brinno SHC1000, showing both Door Knocker Mode and Portable Mode.

Image: The Brinno SHC1000 with its motion detector and knocking sensor, illustrating how it records images when triggered.

وضع مطرقة الباب:

In this mode, the motion sensor is integrated into the provided door knocker casing and installed directly around your existing peephole. This provides a discreet appearance.

1. Remove your existing peephole.
2. Insert the new 12mm peephole (included) through the door from the outside.
3. From the inside, attach the base flange and tighten it using the provided tool.
4. Place the motion sensor (MAS200) into the door knocker casing.
5. Mount the door knocker casing with the motion sensor onto the exterior side of the door, aligning it with the peephole.
6. Attach the main unit to the interior side of the door, aligning it with the peephole and base flange. Secure it firmly.

الوضع المحمول:

For more flexible placement, the motion sensor can be used with the magnetic wall mount and hidden near your front door. This allows for optimal motion detection coverage.

1. Attach the magnetic wall mount to a suitable surface near your door using the provided screws or adhesive.
2. Mount the motion sensor (MAS200) onto the magnetic wall mount.
3. Install the main unit and peephole as described in steps 1-3 of the Door Knocker Mode.

عملية

The Brinno SHC1000 is designed for simple operation. Here’s how to use its main features:

Viewing Visitors:

ل view who is at your door, simply press the central button on the main unit. The large LCD screen will display a clear image from the peephole camera.

Digital Visitor Log:

The camera automatically records images of visitors when motion or knocking is detected. These images are stored on the microSD card with a time and date stamp.

• Access the menu on the main unit to browse recorded images.
• Use the navigation buttons to scroll through the visitor log.
• Images can be transferred to a computer by removing the microSD card and inserting it into a card reader.

Adjusting Knock Sensor Sensitivity:

The knocking sensor sensitivity can be adjusted to suit your door's thickness and environment. This ensures optimal detection without false triggers.

1. Power on the main unit and navigate to the settings menu.
2. Select the "Adjust Knock Sensor" option.
3. Use the up/down buttons to increase or decrease sensitivity. A higher value is suitable for thicker doors, while a lower value is for thinner doors.
4. Test the sensitivity by gently knocking on your door. The device will display a "TEST" icon if the knock is detected.
5. Confirm your setting to save.

صيانة

• استبدال البطارية: The SHC1000 uses 4 AA batteries. Replace them when the low battery indicator appears on the screen. Ensure the device is powered off before replacing batteries.
• تنظيف: Use a soft, dry cloth to clean the LCD screen and camera lens. Avoid abrasive cleaners or solvents.
• إدارة بطاقة MicroSD: Regularly back up important recordings from your microSD card. Format the card periodically to maintain optimal performance.

Image: The Brinno SHC1000 is powered by 4 AA batteries, offering extended battery life for up to 1,800 triggers or approximately six months.

استكشاف الأخطاء وإصلاحها

الجهاز لا يعمل:

Ensure batteries are correctly installed and fully charged. Check the power switch on the side of the main unit.

No images recorded:

Verify that the microSD card is properly inserted and has sufficient storage space. Check if the motion sensor (MAS200) is activated and paired correctly. Adjust the motion and knock sensor sensitivity settings.

جودة الصورة رديئة:

Ensure the camera lens and peephole are clean and free from obstructions. The optical peephole lens is designed for clear images on the LCD display.

Motion/Knock sensor not detecting:

Confirm the MAS200 motion sensor is activated (blue LED flashing). Re-pair the motion sensor with the main unit if necessary (refer to the "Re-pairing Motion Sensor" section). Adjust sensitivity settings for both motion and knock sensors.

عمر بطارية قصير:

Ensure you are using high-quality AA batteries. Frequent triggers or extreme temperatures can reduce battery life. Consider reducing sensor sensitivity if experiencing excessive false triggers.

تحديد

الضمان والدعم

For warranty information and technical support, please refer to the official Brinno website or contact Brinno customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer: Brinno Incorporated c/o Phase 3 Systems Corporation