دليل تعليمات دواسة الصوت النشط/واه من سونيكيك فول واه

1. المقدمة

The SONICAKE VolWah is a compact, 2-in-1 active volume and wah effect pedal designed for electric guitars. This manual provides detailed instructions for setting up, operating, and maintaining your pedal to ensure optimal performance.

2. معلومات السلامة

• Use only a DC 9V center-negative power adapter (not included).
• لا تقم بتفكيك الوحدة أو تعديلها.
• تجنب تعريض الوحدة لدرجات حرارة شديدة أو رطوبة عالية أو لأشعة الشمس المباشرة.
• يحفظ بعيدًا عن متناول الأطفال.
• تأكد من التهوية المناسبة لمنع ارتفاع درجة الحرارة.

3. محتويات العبوة

• SONICAKE VolWah Active Volume/Wah Pedal
• دليل التعليمات (هذا المستند)

4. انتهى المنتجview

Familiarize yourself with the controls and connections of your VolWah pedal.

الصورة 1: SONICAKE VolWah Pedal showing input, output, DC 9V, and footswitch with numbered labels.

• 1. Input Jack: Connect your guitar or other instrument here.
• 2. مدخل طاقة تيار مستمر 9 فولت: Connect a standard 9V DC center-negative power adapter.
• 3. Footswitch (Hidden): Press down firmly with your toe to switch between Volume and Wah modes.
• 4. MIN VOL Knob: Adjusts the minimum volume level in Volume mode (0-50% range).
• 5. Output Jack: الاتصال بجهازك ampمكبر أو دواسات مؤثرات أخرى.
• QUALITY Knob: Adjusts the Q value of the wah effect, influencing the sharpness of the wah tone.
• RANGE Knob: Selects different center frequency ranges for the wah effect.
• مؤشرات LED: Two LEDs indicate the pedal's active mode (e.g., one for Volume, one for Wah).

5. الإعداد

1. توصيل الطاقة: Connect a DC 9V center-negative power adapter to the DC 9V input jack. The pedal does not operate on batteries.
2. اتصال الجهاز: Connect your electric guitar to the "Input" jack of the VolWah pedal using a standard 1/4-inch instrument cable.
3. Ampاتصال lifier: Connect the "Output" jack of the VolWah pedal to your amplifier or the input of your next effect pedal in the signal chain using a standard 1/4-inch instrument cable.
4. TRS Cable for Active Volume: For optimal active volume control and to avoid impedance mismatch issues, it is recommended to use a TRS (Tip-Ring-Sleeve) cable for connections where active volume control is critical.

الصورة 2: Connection diagram for the VolWah pedal in a typical guitar setup.

6. تعليمات التشغيل

6.1 تشغيل/إيقاف التشغيل

The pedal powers on automatically when connected to a 9V DC power supply. Disconnect the power supply to turn off the pedal.

6.2 Switching Modes (Volume / Wah)

The VolWah pedal features a hidden footswitch. To toggle between Volume and Wah modes, press down firmly on the toe end of the pedal until you feel a click. The LED indicators will change to show the active mode.

الصورة 3: Demonstrating how to engage the footswitch by pressing the toe end of the pedal.

6.3 وضع مستوى الصوت

In Volume mode, the pedal acts as an active volume control. Move the pedal from heel (minimum volume) to toe (maximum volume) to adjust your guitar's output level.

• MIN VOL Knob: Use this knob to set the minimum volume level when the pedal is in the heel-down position. This allows for precise control over your volume swells.

6.4 Wah Mode

In Wah mode, the pedal produces a classic wah-wah effect. Move the pedal from heel (bass frequencies) to toe (treble frequencies) to sweep through the wah effect.

• QUALITY Knob: This knob adjusts the "Q" value of the wah filter. Turning it clockwise will make the wah effect sharper and more pronounced.
• RANGE Knob: Use this knob to select different center frequency ranges for the wah effect, allowing you to fine-tune the character of your wah sound.

6.5 مؤشرات LED

The two LED lights on the pedal indicate its current operating mode. Refer to the product overview for specific LED color assignments for Volume and Wah modes.

7. الميزات الرئيسية

• 100% Analog Volume/Wah 2-in-1 Pedal.
• Lightweight yet robust and well-built casing.
• Active Volume Control prevents impedance mismatch issues.
• فينtage Wah Sound style.
• Seamless switching between Volume & Wah via hidden footswitch.
• Dual LED indicators for clear mode identification.

8. المواصفات

الصورة 4: Dimensions of the SONICAKE VolWah pedal.

9. الصيانة

• تنظيف: Use a soft, dry cloth to clean the pedal. Do not use liquid cleaners or solvents.
• تخزين: Store the pedal in a dry, cool place away from direct sunlight when not in use.
• الاتصالات: افحص جميع توصيلات الكابلات بانتظام للتأكد من عدم وجود أي تلف أو تآكل.

10. استكشاف الأخطاء وإصلاحها

11. الضمان والدعم

For warranty information and technical support, please refer to the official SONICAKE webقم بزيارة الموقع الإلكتروني أو اتصل بالوكيل المحلي. احتفظ بإيصال الشراء كإثبات للشراء.