مقدمة
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ABAC Pole Position 24 Litre Air Compressor. Please read this manual thoroughly before operating the compressor and keep it for future reference.
The ABAC Pole Position 24 Litre Air Compressor is designed for various DIY and light professional tasks, featuring a 24-litre tank, 2 HP (1.5 kW) motor, 220 litres/minute air intake, and a maximum pressure of 10 bar.
تعليمات السلامة
Always observe the following safety precautions to prevent personal injury or damage to the compressor:
- تأكد من وضع الضاغط على سطح ثابت ومستوٍ.
- لا تقم بتشغيل الضاغط في مكان رطب أو دamp شروط.
- Wear appropriate personal protective equipment (PPE), such as eye protection and hearing protection.
- Before any maintenance or inspection, disconnect the compressor from the power supply and ensure the tank is fully depressurized.
- لا توجه الهواء المضغوط نحو الأشخاص أو الحيوانات أبدًا.
- احتفظ بالأطفال والأشخاص غير المصرح لهم بعيدًا عن منطقة التشغيل.
- Regularly check all connections and hoses for leaks or damage.
مكونات أكثرview

- خزان الهواء: Stores compressed air (24 litres capacity).
- Motor and Pump Assembly: Generates compressed air.
- أجهزة قياس الضغط: يعرض ضغط الخزان وضغط المخرج المنظم.
- منظم الضغط: يضبط ضغط الهواء الخارج.
- وصلة التوصيل السريع: لتركيب أدوات الهواء والخراطيم.
- استنزاف صمام: تقع في الجزء السفلي من الخزان لتصريف التكثيف.
- العجلات والمقبض: لتسهيل نقل الوحدة.
يثبت
- التفريغ والتفتيش: Carefully remove the compressor from its packaging. Inspect for any visible damage that may have occurred during transit. Report any damage to the supplier immediately.
- التجميع (إذا لزم الأمر): Attach the wheels and handle using the provided hardware. Ensure all bolts are securely tightened.
- Initial Oil Check: Before first use, verify the oil level in the pump. The compressor may be shipped without oil or with a minimal amount. Refer to the oil sight glass or dipstick. If necessary, fill with appropriate compressor oil (typically SAE 30 non-detergent) to the indicated level.
- الموقع: Position the compressor on a firm, level surface in a well-ventilated area. Ensure there is adequate space around the unit for air circulation.
- التوصيل الكهربائي: Connect the compressor to a grounded electrical outlet with the correct voltage (230 Volts) and circuit protection. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the compressor's power requirements.
تعليمات التشغيل
- بدء تشغيل الضاغط:
- تأكد من إغلاق صمام التصريف الموجود في أسفل الخزان.
- Plug the compressor into the power outlet.
- Flip the ON/OFF switch to the 'ON' position. The compressor will start to build pressure until it reaches its maximum cut-off pressure (10 bar).
- ضبط ضغط الإخراج:
- Turn the pressure regulator knob clockwise to increase pressure and counter-clockwise to decrease pressure.
- Monitor the regulated pressure gauge to set the desired working pressure for your air tool.
- ربط الأدوات الهوائية:
- Attach your air hose to the quick connect coupler.
- قم بتوصيل أداة الهواء بالطرف الآخر من الخرطوم.
- اغلاق:
- قم بتحريك مفتاح التشغيل/الإيقاف إلى وضع "إيقاف التشغيل".
- افصل الضاغط عن مأخذ الطاقة.
- Depressurize any air remaining in the hose and tool.
- تصريف التكثيف: After each use, or at least daily, open the drain valve at the bottom of the tank to release any accumulated moisture. This prevents rust and extends the tank's lifespan.
صيانة
Regular maintenance ensures optimal performance and longevity of your compressor.
- يوميًا:
- قم بتصريف التكثيف من خزان الهواء.
- Check oil level (if applicable, for oil-lubricated models).
- أسبوعيًا/كل 10 ساعات من الاستخدام:
- Inspect air filter for dirt and debris. Clean or replace if necessary.
- تأكد من عدم وجود أي أصوات أو اهتزازات غير عادية.
- شهرياً/كل 50 ساعة استخدام:
- Inspect all fasteners for tightness.
- Check safety valve operation (briefly pull the ring to ensure it releases air).
- سنوياً/كل 200 ساعة من الاستخدام:
- Change compressor oil (if applicable).
- Inspect pressure switch and gauges for proper function.
- تخزين: When storing the compressor for extended periods, ensure the tank is drained of all moisture and store in a dry, protected area.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الضاغط لا يبدأ. | انقطاع التيار الكهربائي، تعطل قاطع الدائرة، عطل في المفتاح. | Check power connection, reset breaker, contact service. |
| يعمل الضاغط بشكل مستمر. | تسرب الهواء، مفتاح الضغط المعيب، فلتر الهواء المسدود. | Check for leaks, inspect pressure switch, clean/replace filter. |
| ضغط هواء منخفض. | Regulator set too low, air leak, worn pump components. | Adjust regulator, check for leaks, contact service. |
| ضجيج أو اهتزاز مفرط. | مكونات مفكوكة، محامل مهترئة، زيت غير كافٍ. | Tighten fasteners, check oil level, contact service. |
| تسرب النفط. | Loose fittings, damaged seals, overfilled oil. | Check connections, replace seals, adjust oil level. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact ABAC customer support or a qualified service technician.
تحديد
| ماركة | ABAC |
| اسم الموديل | Pole Position 24 Litre |
| سعة الخزان | 24 لتر |
| قوة | 2 حصان (1.5 كيلو واط) |
| مدخل الهواء | 220 Litres/minute |
| الحد الأقصى للضغط | 10 بار |
| المجلدtage | 230 فولت |
| مستوى الصوت | 95 ديسيبل |
| الأبعاد (الطول × العرض × الارتفاع) | 60 × 60 × 26 سم |
| وزن | 3 كجم |
الضمان والدعم
ABAC products are manufactured to high quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ABAC webموقع.
For technical assistance, spare parts, or service inquiries, please contact your authorized ABAC dealer or customer support. When contacting support, please have your product model and serial number ready.
يمكنك العثور على مزيد من المعلومات وتفاصيل الاتصال على ABAC Store on Amazon.