دليل تعليمات قفل Codelocks CL610-BS ANSI من الدرجة الثانية الميكانيكية

1. انتهى المنتجview

The Codelocks CL610-BS is an ANSI Grade 2 mechanical lockset designed for both internal and external door applications. It features a keyless entry system with an EZ Code Change function, allowing for quick code modifications without removing the lock from the door. The lockset includes a tubular mortise latch and a spring-loaded latchbolt for automatic locking upon door closure. It is supplied with a pre-set random code that begins with the "C" clear button.

Image 1: The Codelocks CL610-BS mechanical lockset, featuring a keypad on the exterior side and a lever handle with a key override. The lock is shown installed on a light-colored wooden door, with an inset showing the interior handle.

2. الإعداد والتثبيت

Installation of the Codelocks CL610-BS requires careful attention to detail. An assembly guide is included with the product to facilitate the installation process. It is recommended to follow the provided guide step-by-step for proper setup.

2.1 إعداد الرمز الأولي

The lockset is supplied with a random factory-set code. This code always begins with the "C" clear button. Refer to the included assembly guide for instructions on how to change this initial code to a personalized one. The EZ Code Change feature allows for code modification without removing the lock from the door.

• تحضير: Ensure all components are present as listed in the assembly guide.
• تحضير الباب: Prepare the door according to the templates provided in the assembly guide.
• حَشد: Follow the detailed instructions for mounting the lock components, including the tubular mortise latch and the lock body.
• الاختبار: After installation, test the lock's functionality with the factory code and then with your new code.

3. تعليمات التشغيل

3.1 Entering the Code

1. Press the "C" clear button to reset any previous entries.
2. Enter your unique code sequence.
3. Rotate the outside lever handle to retract the latch.
4. Release the handle to allow the latch to extend and secure the door.

ملحوظة: The "C" clear button must be pressed before entering the code to ensure correct operation.

3.2 القفل التلقائي

The CL610-BS features a spring-loaded latchbolt that automatically extends and locks the door when it is closed. This provides immediate security without requiring manual locking action.

3.3 EZ Code Change Function

The EZ Code Change feature allows users to modify the access code quickly and easily while the lock is still installed on the door. Refer to the specific instructions in your assembly guide for the exact procedure to change the code. This typically involves a specific sequence of button presses and lever movements.

4. الصيانة

To ensure the longevity and optimal performance of your Codelocks CL610-BS lockset, regular maintenance is recommended.

• تنظيف: امسح الأسطح الخارجية للقفل بقطعة قماش ناعمة و...amp cloth. Avoid abrasive cleaners or solvents, as these can damage the brushed steel finish.
• تشحيم: Periodically apply a small amount of silicone-based lubricant to the latch mechanism to ensure smooth operation. Do not use oil-based lubricants, which can attract dust and debris.
• تقتيش: Regularly check all screws and fasteners to ensure they are tight. Inspect the handles and keypad for any signs of wear or damage.

5. استكشاف الأخطاء وإصلاحها

If you encounter issues with your CL610-BS lockset, consider the following common troubleshooting steps:

• الكود لا يعمل:
  • Ensure the "C" clear button is pressed before entering the code.
  • Verify that the correct code is being entered.
  • Check if the code has been recently changed using the EZ Code Change function.
• Handle Does Not Retract Latch:
  • Confirm that the correct code has been entered and the handle is being turned immediately after.
  • افحص آلية المزلاج بحثًا عن أي عوائق أو تلف.
  • Ensure the lockset is properly aligned and secured to the door.
• مشاكل في الإغلاق:
  • Check the door frame strike plate for proper alignment with the latchbolt.
  • Ensure the door closes smoothly without excessive friction on the latch.

For persistent issues, consult the detailed troubleshooting section in your assembly guide or contact Codelocks customer support.

6. المواصفات

7. الضمان والدعم

7.1 ضمان الشركة المصنعة

Specific warranty details for the Codelocks CL610-BS lockset are typically provided with the product documentation or can be obtained directly from the manufacturer. It is advisable to retain your proof of purchase for warranty claims.

7.2 دعم العملاء

For technical assistance, replacement parts, or further inquiries, please contact Codelocks customer support. Refer to the contact information provided in your product packaging or on the official Codelocks webموقع.