دليل استخدام ساعة المنبه ومقياس الحرارة الداخلي KWANWA KW715S 2 في 1

1. انتهى المنتجview

The KWANWA KW715S is a versatile 2-in-1 device functioning as both a digital alarm clock and an indoor thermometer. Designed for portability and ease of use, it features a clear digital display, adjustable brightness, and long-lasting battery operation. Simply flip the device to switch between time and temperature display modes.

2. الإعداد

2.1 تركيب البطارية

The KWANWA KW715S operates on 2 × بطاريات قلوية AA (not included). Ensure correct polarity when inserting the batteries into the compartment located on the back of the device.

2.2 ضبط الوقت الأولي

1. اضغط مع الاستمرار على الوقت المحدد button (located on the back) for 2 seconds until the hour digits begin to flash.
2. استخدم ساعة و مين أزرار لضبط الوقت.
3. يضعط الوقت المحدد مرة أخرى للتأكيد والخروج من وضع ضبط الوقت.

2.3 اختيار وحدة درجة الحرارة (°مئوية/°فهرنهايت)

The device allows you to switch between Celsius (°C) and Fahrenheit (°F) display modes. This can be done by flipping the clock over to display temperature, then using the dedicated °C/°F button if available, or by following specific instructions in the operating section.

3. تعليمات التشغيل

3.1 ضبط المنبه

1. اضغط مع الاستمرار على آل سيت button (on the back) for 2 seconds until the alarm hour digits flash.
2. استخدم ساعة و مين أزرار لضبط وقت التنبيه الذي ترغب فيه.
3. يضعط آل سيت مرة أخرى للتأكيد والخروج من وضع ضبط المنبه.

3.2 تشغيل/إيقاف التنبيه

استخدم AL ON / OFF switch (on the back) to activate or deactivate the alarm. When the alarm is active, an alarm icon will appear on the display.

3.3 وظيفة الغفوة

When the alarm sounds, gently touch the large غفوة button on the top of the clock. This will temporarily silence the alarm for 7 minutes. The snooze function can be repeated up to 3 times.

3.4 سطوع قابل للتعديل

اضغط على الوقت المحدد button for 2 seconds to cycle through 3 levels of brightness: low, middle, and high. The clock also features an automatic night mode, which dims the display between 8:00 PM and 6:00 AM to create a peaceful sleeping environment.

3.5 Switching Between Time and Temperature

To switch between displaying the time and the indoor temperature, simply flip the alarm clock upside down. The display will automatically change to show the current indoor temperature.

3.6 12-Hour / 24-Hour Mode

The clock supports both 12-hour and 24-hour time formats. Refer to the buttons on the back for the specific button to toggle between these modes (e.g., a dedicated 12 / 24HR زر).

4. الصيانة

4.1 استبدال البطارية

The device features a low battery indicator. When this indicator appears, it is time to replace the 2x AA alkaline batteries to ensure continuous operation and accurate readings. The improved design allows batteries to last over 1 year.

4.2 التنظيف

To clean the clock, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the display or casing.

5. استكشاف الأخطاء وإصلاحها

• عرض الخفقان: If you observe flickering in videos of the product, please note that this is often an artifact of video recording and not indicative of actual product performance. The display is stable in real-life use.
• إنذار لا يصدر: تأكد من AL ON / OFF switch is in the 'ON' position. Verify that the alarm time is correctly set. Check the battery level and replace batteries if the low battery indicator is active.
• الوقت/درجة الحرارة غير صحيحين: Re-set the time following the instructions in Section 2.2. For temperature, ensure the device is placed in a stable indoor environment away from direct heat sources or drafts for accurate readings.
• مؤشر انخفاض البطارية: This icon signals that the batteries are running low and should be replaced soon.

6. المواصفات

7. الضمان والدعم

For warranty information or product support, please contact KWANWA customer service at: support@odokeeshop.com.