myTouchSmart 26892-T5

myTouchSmart Indoor Plug-in Simple Set Digital Timer (Model 26892-T5) User Manual

Model: 26892-T5 | Brand: myTouchSmart

1. المقدمة

This manual provides detailed instructions for the setup, operation, and maintenance of your myTouchSmart Indoor Plug-in Simple Set Digital Timer, Model 26892-T5. Please read this manual thoroughly before using the device to ensure proper function and safety.

The myTouchSmart Digital Timer is designed to automate indoor lighting and electronics, allowing you to schedule their operation for convenience and energy efficiency.

2. انتهى المنتجview

myTouchSmart Indoor Plug-in Simple Set Digital Timer, front view عرض الشاشة الرقمية وأزرار التحكم

الشكل 1: أمام view of the myTouchSmart Indoor Plug-in Simple Set Digital Timer. The device is white, oval-shaped, with a digital display at the top showing "10:10 PM". Below the display are two arrow buttons (up and down). Further down are six rectangular buttons arranged in two columns: "my on time", "my off time", "evening 5pm-12am", "morning 5am-8am", "all night 6pm-6am", and "countdown". A polarized outlet is visible on the right side.

The myTouchSmart Digital Timer features a compact design with a clear digital display and intuitive control buttons. It includes a single polarized outlet for connecting your device.

المكونات الرئيسية:

3. المميزات

4. الإعداد

4.1 التشغيل الأولي

  1. Unpack the timer from its packaging.
  2. Plug the timer into a standard 125V wall outlet. The display will illuminate.
  3. Allow the timer to charge its internal backup battery for approximately 15 minutes before programming. This ensures settings are retained during power interruptions.

4.2 ضبط الوقت الحالي

  1. اضغط مع الاستمرار على ساعة button (located above the display) until the time digits begin to flash.
  2. استخدم UP () و تحت () arrow buttons to adjust the hour. Pay attention to the AM/PM indicator.
  3. اضغط على ساعة button again to move to the minutes setting.
  4. استخدم UP () و تحت () أزرار الأسهم لضبط الدقائق.
  5. اضغط على ساعة button one more time to save the current time and exit the setting mode.

5. تعليمات التشغيل

Connect the appliance or light you wish to control into the polarized outlet on the right side of the timer.

5.1 Setting Custom On/Off Times ("My On Time" / "My Off Time")

  1. اضغط على أنا في الموعد المحدد button. The display will show "ON" and the time will flash.
  2. استخدم UP () و تحت () arrow buttons to set the desired turn-on hour, then press أنا في الموعد المحدد again to set minutes.
  3. Once the desired ON time is set, press أنا في الموعد المحدد to confirm. A blue LED indicator next to the button will light up, indicating the program is active.
  4. Repeat the process for the وقت فراغي button to set the desired turn-off time. A blue LED indicator next to the button will light up.
  5. To deactivate a custom program, press the corresponding أنا في الموعد المحدد or وقت فراغي button until the blue LED indicator turns off.

5.2 استخدام البرامج المُعدة مسبقًا

The timer offers three convenient preset programs:

To activate a preset program, simply press the corresponding button (مساء, صباح، أو ALL NIGHT). A blue LED indicator next to the button will light up, confirming the program is active. To deactivate, press the button again until the LED turns off.

5.3 استخدام مؤقت العد التنازلي

  1. اضغط على العد التنازلي button. The display will show "CD" and the time will flash.
  2. استخدم UP () و تحت () arrow buttons to set the desired countdown duration (up to 24 hours, in 1-minute intervals).
  3. يضعط العد التنازلي again to start the countdown. The blue LED indicator will light up.
  4. The connected device will turn ON (if currently OFF) or OFF (if currently ON) after the countdown duration expires.
  5. لإلغاء العد التنازلي، اضغط على الزر العد التنازلي button again until the blue LED indicator turns off.

Note: Only one program (custom or preset) can be active at a time. Activating a new program will deactivate any previously active program. The countdown timer operates independently but will override other programs for its duration.

6. الصيانة

6.1 التنظيف

To clean the timer, unplug it from the wall outlet. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials, as these may damage the device.

6.2 بطارية احتياطية

The timer includes an internal backup battery to retain settings during power outages. This battery is not user-replaceable and is designed to last the lifetime of the product. Ensure the timer is plugged in for at least 15 minutes initially to charge this battery.

7. استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
شاشة المؤقت فارغة.لا يوجد طاقة للمخرج.Check the wall outlet with another device. Ensure the timer is fully plugged in.
Connected device does not turn On/Off.Program not active or incorrect settings.Verify the blue LED indicator for the desired program is lit. Recheck your custom or preset time settings. Ensure the connected device is switched ON.
تُفقد الإعدادات بعد انقطاع التيار الكهربائيtage.Backup battery not sufficiently charged.Ensure the timer is plugged in for at least 15 minutes to charge the backup battery. If issues persist, the battery may be depleted (not user-replaceable).
Timer is not responding to button presses.خلل مؤقت في البرنامج.Unplug the timer from the wall outlet for 30 seconds, then plug it back in. This may reset the device.

8. المواصفات

9. الضمان والدعم

9.1 الضمان المحدود

This myTouchSmart Digital Timer is backed by a ضمان محدود لمدة سنة واحدة. For details regarding warranty coverage and claims, please refer to the warranty card included with your product or visit the manufacturer's official webموقع.

9.2 دعم العملاء

For technical assistance, troubleshooting not covered in this manual, or general inquiries, please contact myTouchSmart customer support. Contact information can typically be found on the product packaging or the official myTouchSmart webموقع.

Please have your model number (26892-T5) and purchase date available when contacting support.

المستندات ذات الصلة - 26892-T5

قبلview دليل المستخدم لمؤقت myTouchSmart الرقمي الداخلي البسيط القابل للتوصيل
تعرّف على كيفية إعداد وبرمجة مؤقت myTouchSmart Simple Set Indoor Plug-In الرقمي للتحكم الآلي في الإضاءة. يتضمن تعليمات لجداول زمنية مخصصة، وأوقات محددة مسبقًا، وميزات العد التنازلي.
قبلview دليل مستخدم مؤقت التوصيل myTouchSmart SunSmart
دليل المستخدم لمؤقت myTouchSmart SunSmart Plug-In، يشرح بالتفصيل الإعداد وخيارات البرمجة ومواصفات التوقيت الرقمي الداخلي. تعرّف على كيفية أتمتة إضاءة منزلك وأجهزتك المنزلية.
قبلview دليل المستخدم لمؤقت التوصيل البسيط myTouchSmart
تعليمات ومواصفات مؤقت myTouchSmart Simple Set Plug-In، وهو مؤقت رقمي للاستخدام الداخلي والخارجي لأتمتة الإضاءة والأجهزة المنزلية. تعرّف على كيفية تركيبه، وضبط الوقت، وبرمجة أوقات التشغيل والإيقاف، وفهم تحذيرات السلامة.
قبلview مؤقت myTouchSmart البسيط القابل للتوصيل: دليل الإعداد والبرمجة
دليل مُوجز لإعداد وبرمجة مؤقت myTouchSmart Simple Set Plug-In للتحكم الآلي في الأضواء والأجهزة. تعلّم كيفية ضبط أوقات التشغيل والإيقاف، وفهم الميزات، واتباع تعليمات السلامة.
قبلview دليل المستخدم ودليل التثبيت لمؤقت myTouchSmart الرقمي المثبت في الحائط 26893
دليل المستخدم الشامل ودليل التثبيت لجهاز المؤقت الرقمي الجداري myTouchSmart (موديل 26893). تعرّف على كيفية تثبيت واستخدام هذا المؤقت القابل للبرمجة بأمان للإضاءة والمراوح الداخلية والخارجية.
قبلview myTouchSmart Wi-Fi Smart Devices Setup and Integration Guide
Comprehensive guide for setting up myTouchSmart Wi-Fi smart plugs and switches, including app integration, voice assistant compatibility with Alexa and Google Assistant, and product details.